Mailinglist Archive: opensuse (1047 mails)

< Previous Next >
Re: [opensuse] Strange update problem - Leap 42.1
On 01/08/2016 03:32 PM, Per Jessen wrote:
Gustav Degreef wrote:

On 01/08/2016 02:54 PM, Per Jessen wrote:
Gustav Degreef wrote:

That looks fine - your machine is 1.33, your router is 1.1. It
sounds like "Network is unreachable" is caused by your "zypper ref"
trying to
use the IPv6 address of "download.opensuse.org". Do you still get
this error?

What does "host download.opensuse.org" say? On a systems with no
IPv6 connectivity, you ought to see the IPv4 address listed first.


/Per
Thanks Per. The results now are:
user@linux:~> host download.opensuse.org
download.opensuse.org has address 195.135.221.134
download.opensuse.org has IPv6 address 2001:67c:2178:8::13
;; connection timed out; no servers could be reached
The last line is a little odd, not sure where that would be from.
Otherwise fine.

user@linux:~> ping6 download.opensuse.org
PING download.opensuse.org(ftp.opensuse.org) 56 data bytes
From fe80::1 icmp_seq=1 Destination unreachable: No route
Hmm, let us see your network config, please: "ip addr"


From Leap 42.1

linux:/home/user # ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
group de
fault qlen 1000
link/ether …........... brd …................
inet 192.168.1.33/24 brd 192.168.1.255 scope global dynamic eth0
valid_lft 42778sec preferred_lft 42778sec
inet6 …...............:1253/64 scope link
valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group
default q
len 1000
link/ether ….............. brd …...................
inet 192.168.1.34/24 brd 192.168.1.255 scope global dynamic wlan0
valid_lft 42823sec preferred_lft 42823sec
inet6 fe80::5ee0:c5ff:fe82:6a8b/64 scope link
valid_lft forever preferred_lft forever
Thanks, Gustav

p.s. Not sure if this is helpful, but this is the same machine, but the
13.2 install:

linux:/home/user # ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
group default
link/loopback ................. brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP group default qlen 1002
link/ether brd ff:ff:ff:ff:ff:ff
inet6 .................:1253/64 scope link
valid_lft forever preferred_lft forever
3: wlp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
group default qlen 1000
link/ether .................... brd ....................
inet 192.168.1.34/24 brd 192.168.1.255 scope global dynamic wlp3s0
valid_lft 40871sec preferred_lft 40871sec
inet6 ..................... scope link
valid_lft forever preferred_lft forever
--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
To contact the owner, e-mail: opensuse+owner@xxxxxxxxxxxx

< Previous Next >
Follow Ups