Mailinglist Archive: opensuse (878 mails)

< Previous Next >
Re: [opensuse] No usb automount in 12.3
Marcus Meissner said the following on 09/30/2013 08:26 AM:
On Mon, Sep 30, 2013 at 08:14:02AM -0400, Anton Aylward wrote:

Sep 30 07:53:47 MainBox mtp-probe: checking bus 1, device 7:
"/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8"
Sep 30 07:53:47 MainBox mtp-probe: bus: 1, device: 7 was not an MTP device

I do know USB works. I've been downloading from my camera using digikam
and gphotofs.

Once again, this is 12.3 with 3.7.10-1.16-desktop

I think your device is just not detected as mass storage device.

can you run "lsusb -v" with your device attached and post the device part here?

It could also be that the udev rules aren't 'chainng' and the MTP fail is early in the queue and its fail stops the testing of other things.

Or perhaps since usb_storage isn't loaded, its not POSSIBLE to recognize a styoarage devie!

Anywqy, lsusb produces a vast emount of informatiob, but the part you might be interested is the part about the storage device and yes its there in the lisitng and as I said earlier, the logs show

> Sep 30 07:53:47 MainBox kernel: [ 988.130036] usb 1-8: new high-speed USB
> device number 7 using ehci_hcd
> Sep 30 07:53:47 MainBox kernel: [ 988.252449] usb 1-8: New USB device
> found, idVendor=058f, idProduct=6387
> Sep 30 07:53:47 MainBox kernel: [ 988.252455] usb 1-8: New USB device
> strings: Mfr=1, Product=2, SerialNumber=3
> Sep 30 07:53:47 MainBox kernel: [ 988.252458] usb 1-8: Product: Mass
> Storage
> Sep 30 07:53:47 MainBox kernel: [ 988.252461] usb 1-8: Manufacturer:
> Generic
> Sep 30 07:53:47 MainBox kernel: [ 988.252464] usb 1-8: SerialNumber:
> 986D9FD4

Note that is deos see the string 'Mass Storage' and it is seen with ehci_hcd

Here's the part of the lsusb -v listing relevant for the device

Bus 001 Device 008: ID 058f:6387 Alcor Micro Corp. Flash Drive
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x058f Alcor Micro Corp.
idProduct 0x6387 Flash Drive
bcdDevice 1.0b
iManufacturer 1 Generic
iProduct 2 Mass Storage
iSerial 3 986D9FD4
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 200mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0


Along side that, just to make the point, I am using a USB mouse, and that is reported too:

Bus 002 Device 006: ID 046d:c01d Logitech, Inc. MX510 Optical Mouse
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc01d MX510 Optical Mouse
[....]

So this issue isn't with the usb hardware.

I know a little about systemd and virtually nothing about udev and usdisks.

Marcus, when you reply to the list, please don't bother cc'ing me since I do subscribe to the list :-)




--
How long did the whining go on when KDE2 went on KDE3?

The only universal constant is change. If a species can not adapt it
goes extinct. That's the law of the universe, adapt or die.
-- Billie Walsh, May 18 2013
--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
To contact the owner, e-mail: opensuse+owner@xxxxxxxxxxxx

< Previous Next >