Mailinglist Archive: opensuse (924 mails)

< Previous Next >
Re: [opensuse] /dev/sda1 is not a valid block device : not able mount any SDA partition
  • From: Per Jessen <per@xxxxxxxxxxxx>
  • Date: Fri, 05 Oct 2012 13:37:03 +0200
  • Message-id: <k4mgov$ps0$2@saturn.local.net>
ellanios82 wrote:

[ 1.844645] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action
[ 0x6 1.844784] ata1.01: BMDMA stat 0x44
[ 1.844858] ata1.01: failed command: READ DMA
[ 1.844942] ata1.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0
dma 4096 in
[ 1.844942] res 51/84:00:00:00:00/00:00:00:00:00/f0 Emask
0x10 (ATA bus error)
[ 1.845230] ata1.01: status: { DRDY ERR }
[ 1.845305] ata1.01: error: { ICRC ABRT }
[ 1.845403] ata1: soft resetting link
[ 2.128603] ata1.01: configured for UDMA/33
[ 2.128610] sd 0:0:1:0: [sda]
[ 2.128612] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2.128614] sd 0:0:1:0: [sda]
[ 0.907216] ACPI: Invalid Power Resource to register!
[ 2.128616] Sense Key : Aborted Command [current] [descriptor]
[ 2.128619] Descriptor sense data with sense descriptors (in hex):
[ 2.128621] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2.128631] 00 00 00 00
[ 2.128635] sd 0:0:1:0: [sda]
[ 2.128638] Add. Sense: Scsi parity error
[ 2.128641] sd 0:0:1:0: [sda] CDB:
[ 2.128642] Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2.128651] end_request: I/O error, dev sda, sector 0
[ 2.128763] Buffer I/O error on device sda, logical block 0
[ 2.128874] ata1: EH complete
[ 3.068332] ata1.01: limiting speed to UDMA/25:PIO4
[ 3.068335] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action
[ 0x6 3.068471] ata1.01: BMDMA stat 0x44
[ 3.068546] ata1.01: failed command: READ DMA
[ 3.068629] ata1.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0
dma 4096 in
[ 3.068629] res 51/84:00:00:00:00/00:00:00:00:00/f0 Emask
0x10 (ATA bus error)
[ 3.068904] ata1.01: status: { DRDY ERR }
[ 3.068979] ata1.01: error: { ICRC ABRT }
[ 3.069083] ata1: soft resetting link
[ 3.352292] ata1.01: configured for UDMA/25
[ 3.352298] sd 0:0:1:0: [sda]
[ 3.352300] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 3.352302] sd 0:0:1:0: [sda]
[ 3.352303] Sense Key : Aborted Command [current] [descriptor]
[ 3.352306] Descriptor sense data with sense descriptors (in hex):
[ 3.352308] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3.352317] 00 00 00 00
[ 3.352322] sd 0:0:1:0: [sda]
[ 3.352324] Add. Sense: Scsi parity error
[ 3.352327] sd 0:0:1:0: [sda] CDB:
[ 3.352328] Read(10): 28 00 00 00 00 00 00 00 08 00
[ 3.352336] end_request: I/O error, dev sda, sector 0
[ 3.352448] Buffer I/O error on device sda, logical block 0
[ 3.352555] ata1: EH complete
[ 3.400372] ldm_validate_partition_table(): Disk read failed.
[ 3.400764] sda: unable to read partition table
[ 3.400969] sd 0:0:1:0: [sda] Attached SCSI disk


That doesn't look good - can you access it using "fdisk /dev/sda" ?


/Per

--
Per Jessen, Zürich (17.5°C)

--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
To contact the owner, e-mail: opensuse+owner@xxxxxxxxxxxx

< Previous Next >
Follow Ups