Mailinglist Archive: opensuse (924 mails)

< Previous Next >
[opensuse] Boot Probs with Opensuse 12.2
Hi All,

I just installed subject but find it will not boot unless the insstall dvd is in the drive and I point to HD install. The machine will not boot otherwise. My hd setup is as follows:

quartz:~ # fdisk -c -u -l

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
81 heads, 63 sectors/track, 382818 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x000de2de

Device Boot Start End Blocks Id System
/dev/sda1 * 2048 1953525167 976761560 83 Linux

Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
81 heads, 63 sectors/track, 382818 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000ef674

Device Boot Start End Blocks Id System
/dev/sdb1 2048 1953525167 976761560 83 Linux

Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0000d7b1

Device Boot Start End Blocks Id System
/dev/sdc1 * 2048 206847 102400 7 HPFS/NTFS/exFAT
/dev/sdc2 206848 1953521663 976657408 7 HPFS/NTFS/exFAT

Disk /dev/sdd: 60.0 GB, 60022480896 bytes
255 heads, 63 sectors/track, 7297 cylinders, total 117231408 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0003f878

Device Boot Start End Blocks Id System
/dev/sdd1 * 2048 108843007 54420480 83 Linux
/dev/sdd2 108843008 117229567 4193280 82 Linux swap / Solaris
quartz:~ #

This is a dual boot machine with Win7 and opensuse 12.2. The fstab is such:

quartz:~ # cat /etc/fstab
/dev/disk/by-id/ata-OCZ_VERTEX_PLUS_7CV2X9MIAFB9YWK3X70D-part2 swap swap defaults 0 0
/dev/disk/by-id/ata-OCZ_VERTEX_PLUS_7CV2X9MIAFB9YWK3X70D-part1 / ext4 acl,user_xattr 1 1
/dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WCAV55329683-part2 /dos ntfs-3g users,gid=users,fmask=133,dmask=022,locale=en_US.UTF-8 0 0
/dev/sda1 /home ext4 acl,user_xattr 1 2
/dev/sdb1 /iso ext4 acl,user_xattr 1 2
proc /proc proc defaults 0 0
sysfs /sys sysfs noauto 0 0
debugfs /sys/kernel/debug debugfs noauto 0 0
usbfs /proc/bus/usb usbfs noauto 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
quartz:~ #

Any help would be great!!

Thank you,

Phil
--
Carpe Aptenodytes! (Seize the Penguins!)
--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
To contact the owner, e-mail: opensuse+owner@xxxxxxxxxxxx

< Previous Next >