Mailinglist Archive: opensuse (818 mails)

< Previous Next >
Re: [opensuse] Help with bus error
Robert Schweikert wrote:
Hi,

As of Saturday 09/3/11 I am getting the following errors in the system log:

Sep 3 01:43:13 triumph kernel: [45797.024210] ata1.00: exception Emask
0x10 SAct 0x0 SErr 0x280100 action 0x6
Sep 3 01:43:13 triumph kernel: [45797.024229] ata1.00: BMDMA stat 0x26
Sep 3 01:43:13 triumph kernel: [45797.024243] ata1.00: SError: {
UnrecovData 10B8B BadCRC }
Sep 3 01:43:13 triumph kernel: [45797.024259] ata1.00: failed command:
READ DMA EXT
Sep 3 01:43:13 triumph kernel: [45797.024277] ata1.00: cmd
25/00:00:73:d6:20/00:01:21:00:00/e0 tag 0 dma 131072 in
Sep 3 01:43:13 triumph kernel: [45797.024279] res
51/84:df:94:d6:20/84:00:21:00:00/e0 Emask 0x30 (host bus error)
Sep 3 01:43:13 triumph kernel: [45797.024306] ata1.00: status: { DRDY
ERR }
Sep 3 01:43:13 triumph kernel: [45797.024319] ata1.00: error: { ICRC
ABRT }
Sep 3 01:43:13 triumph kernel: [45797.024338] ata1.00: hard resetting link
Sep 3 01:43:13 triumph kernel: [45797.329047] ata1.01: hard resetting link
Sep 3 01:43:13 triumph kernel: [45797.785097] ata1.00: SATA link up 3.0
Gbps (SStatus 123 SControl 300)
Sep 3 01:43:13 triumph kernel: [45797.785110] ata1.01: SATA link down
(SStatus 0 SControl 300)
Sep 3 01:43:13 triumph kernel: [45797.791324] ata1.00: configured for
UDMA/133
Sep 3 01:43:13 triumph kernel: [45797.791405] ata1: EH complete

Not sure what to make of this. I did run 'zypper up' on Friday, but
forget what got updated. There were no changes to the hardware. I also
fiddled around with getting the GNOME keyring daemon running on Xfce.
That's about all the recent changes I can recall.

-> uname -a
Linux triumph 2.6.37.6-0.7-desktop #1 SMP PREEMPT 2011-07-21 02:17:24
+0200 x86_64 x86_64 x86_64 GNU/Linux

openSUSE 11.4 fully patched. The result of all of this is that at time
commands take forever to execute, even running a simple "cal 2011" may
take a minute or so. The music player gets interrupted and the system in
general just appears to stall, not a surprise if the harddrive
connection gets lost.

Any ideas? Is my motherboard going down the tubes? Although it's only a
couple of years old.

It's a SATA error, which I think is telling you about CRC errors, but
it's beyond my foo whether that's between motherboard and controller, or
controller and disk, or within any of the three components.

The resource to decode the details is at
<https://ata.wiki.kernel.org/index.php/Libata_error_messages>

HTH, Dave
--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx

< Previous Next >
Follow Ups
References