Mailinglist Archive: opensuse (1589 mails)

< Previous Next >
Re: [opensuse] hp w2207h
  • From: "Roman B." <rbtc1@xxxxxxxxxx>
  • Date: Wed, 07 Oct 2009 14:33:24 -0400
  • Message-id: <4ACCDEF4.2010307@xxxxxxxxxx>
On 10/07/2009 02:09 PM, David C. Rankin wrote:
On Wednesday 07 October 2009 11:48:27 am Roman B. wrote:

On October 6, 2009 12:27:57 am William Biggs wrote:

I have a hp w2207h 22" lcd I need the drivers for it or how do I set the
display up the reg is 1680X1050

Are you using 11.0 or 11.1 - KDE or GNOME?


Easier than than,

Just edit /etc/X11/xorg.conf (as root) and copy and paste the following
in as
the Monitor section:

Section "Monitor"
Option "CalcAlgorithm" "XServerPool"
DisplaySize 475 295
HorizSync 30-66
Identifier "Monitor[0]"
ModelName "1680X1050@60HZ-whocares"
Option "DPMS"
Option "PreferredMode" "1680x1050"
VendorName "--> LCD-whocares"
VertRefresh 50-61
UseModes "Modes[0]"

** Yes, you really can edit your xorg.conf by hand...and the lines with
'whocares' in them above are just labels that don't affect the display.

That should get you close enough to start X in 1680x1050 on a 22" lcd
display. Also, if you need a modeline (outdated, but still used in some
gtf is your friend. Usage:

gtf h-resolution v-resolution refresh [-v|--verbose] [-f|--fbmode] [-x|--


13:01 archangel:/mnt/ecs/etc/X11> gtf 1680 1050 60

# 1680x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 147.14 MHz
Modeline "1680x1050_60.00" 147.14 1680 1784 1968 2256 1050 1051 1054
-HSync +Vsync

You can also get a working xorg.conf by typing (as root) in a konsole


-or- if you are using a specific module (nvidia or fglrx)

sax2 -r -m 0=nvidia


sax2 -r -m 0=fglrx

** where 0 is your first display. If you have 2 video cards, card 1-nvidia,
card 2-fglrx, then

sax2 -r -m 0=nvidia,1=fglrx

One of those is bound to work... Good luck!

Good one David. I sen't him instructions using saX2 so that he could see
and understand how saX2 works.


Registered Linux User # 179293
OS: openSUSE 11.1 KDE-4.3.1
OS openSUSE 11.2 M8 under review

To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx

< Previous Next >
This Thread
Follow Ups