Mailinglist Archive: opensuse (1473 mails)

< Previous Next >
Re: [opensuse] UUID=>0x and LVM
  • From: Philip Mötteli <philip.moetteli@xxxxxxxxxxxxx>
  • Date: Tue, 16 Jun 2009 11:48:22 +0200
  • Message-id: <389462AF-088A-40E9-A38A-B63112C6F73A@xxxxxxxxxxxxx>
Hi,


Am 16.06.2009 um 09:57 schrieb Per Jessen:

Philip Mötteli wrote:

You may simply be missing the correct kernel module for the disk
controller.

How could I verify that?

lspci

There is no 'lspci' in the fall back shell. But I did it afterwards on the Live-CD. That shouldn't make a difference:

00:00.0 Host bridge: Intel Corporation E7525 Memory Controller Hub (rev 0c)
00:02.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A (rev 0c)
00:03.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A1 (rev 0c)
00:04.0 PCI bridge: Intel Corporation E7525/E7520 PCI Express Port B (rev 0c)
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
01:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev 09)
01:00.1 PIC: Intel Corporation 6700/6702PXH I/OxAPIC Interrupt Controller A (rev 09)
01:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev 09)
01:00.3 PIC: Intel Corporation 6700PXH I/OxAPIC Interrupt Controller B (rev 09)
02:05.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI- X Fusion-MPT Dual Ultra320 SCSI (rev 07)
02:05.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI- X Fusion-MPT Dual Ultra320 SCSI (rev 07)
0b:03.0 RAID bus controller: Adaptec Serial ATA II RAID 1420SA (rev 01)
10:00.0 VGA compatible controller: S3 Inc. 86c325 [ViRGE] (rev 05)
10:02.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
10:03.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet Controller (rev 05)
40:00.0 VGA compatible controller: nVidia Corporation NV44 [Quadro NVS 285] (rev a1)


and lsmod.

There was no 'lsmod' either. I hope, a 'modprobe -l' can help too:

libata
ata_piix
usbcore
ohci-hcd
uhci-hcd
edd
linear
dm-mod
dm-snapshot
mptscsih
mptbase
mptspi
usbhid
hid
ff-memless
scsi_transport_spi
sd_mod
scsi_mod
processor
fan
thermal
jbd
ext3
mbcache


Find your disk controller in the lspci output

Should that be the 'LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07)'?


determine which module it
needs

That should be the 'mptscsih' and 'mptbase'?


and check if that is loaded (lsmod output).

In order to be sure, is the 'modprobe -l', that I did, enough?


Thanks


--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx

< Previous Next >
Follow Ups