Mailinglist Archive: opensuse (2224 mails)

< Previous Next >
Re: [opensuse] Memory Stick Mounting
  • From: ka1ifq <ka1ifq@xxxxxxxxxxxxx>
  • Date: Sat, 3 Feb 2007 20:04:48 -0500
  • Message-id: <200702032004.49139.ka1ifq@xxxxxxxxxxxxx>

> On Saturday 03 February 2007 16:54, Bruce Marshall wrote:

> >
> > You say there was nothing logged in your /var/log/messages since the
> > 19th??
> >
> > Impossible since there should be *many* messages from your re-boot and
> > other activities.
> >
> > Please clarify.
>
> Well here is the last segment of my log:
>

Ok, I found out why the log was not working, here is what is in the log now:

Feb 3 19:46:45 Suse101 kernel: usb 1-2: new full speed USB device using
uhci_hcd and address 2

SNIP This continues.

Feb 3 19:47:47 Suse101 kernel: usb 1-2: new full speed USB device using
uhci_hcd and address 126
Feb 3 19:47:48 Suse101 kernel: usb 1-2: new full speed USB device using
uhci_hcd and address 127

This has been going thru the addresses multiple times for over 30 minutes and
has not been mounted yet. I guess this is the nitty gritty of the problem.

I am going to try another device and see what happens.

This is a self powered Sony dvd drive and video capture:

Feb 3 19:58:38 Suse101 kernel: usb 1-2: new full speed USB device using
uhci_hcd and address 110
Feb 3 19:58:38 Suse101 kernel: usb 1-2: new device found, idVendor=054c,
idProduct=01dc
Feb 3 19:58:38 Suse101 kernel: usb 1-2: new device strings: Mfr=0, Product=0,
SerialNumber=0
Feb 3 19:58:38 Suse101 kernel: usb 1-2: configuration #1 chosen from 1 choice
Feb 3 19:58:38 Suse101 kernel: hub 1-2:1.0: USB hub found
Feb 3 19:58:38 Suse101 kernel: hub 1-2:1.0: 2 ports detected
Feb 3 19:58:38 Suse101 kernel: usb 1-2.1: new full speed USB device using
uhci_hcd and address 111
Feb 3 19:58:38 Suse101 kernel: usb 1-2.1: new device found, idVendor=054c,
idProduct=01de
Feb 3 19:58:38 Suse101 kernel: usb 1-2.1: new device strings: Mfr=1,
Product=2, SerialNumber=0
Feb 3 19:58:38 Suse101 kernel: usb 1-2.1: Product: VRD-VC10 [Video Capture]
Feb 3 19:58:38 Suse101 kernel: usb 1-2.1: Manufacturer: Sony
Feb 3 19:58:38 Suse101 kernel: usb 1-2.1: configuration #1 chosen from 1
choice
Feb 3 19:58:41 Suse101 kernel: usb 1-2.2: new full speed USB device using
uhci_hcd and address 112
Feb 3 19:58:41 Suse101 kernel: usb 1-2.2: new device found, idVendor=054c,
idProduct=01dd
Feb 3 19:58:41 Suse101 kernel: usb 1-2.2: new device strings: Mfr=51,
Product=68, SerialNumber=56
Feb 3 19:58:41 Suse101 kernel: usb 1-2.2: Product: VRD-VC10 [DVD Drive]
Feb 3 19:58:41 Suse101 kernel: usb 1-2.2: Manufacturer: Sony
Feb 3 19:58:41 Suse101 kernel: usb 1-2.2: SerialNumber: DEF19733280
Feb 3 19:58:41 Suse101 kernel: usb 1-2.2: configuration #1 chosen from 1
choice
Feb 3 19:58:42 Suse101 kernel: SCSI subsystem initialized
Feb 3 19:58:42 Suse101 kernel: Initializing USB Mass Storage driver...
Feb 3 19:58:42 Suse101 kernel: scsi0 : SCSI emulation for USB Mass Storage
devices
Feb 3 19:58:42 Suse101 kernel: usbcore: registered new driver usb-storage
Feb 3 19:58:42 Suse101 kernel: USB Mass Storage support registered.
Feb 3 19:58:42 Suse101 kernel: usb-storage: device found at 112
Feb 3 19:58:42 Suse101 kernel: usb-storage: waiting for device to settle
before scanning
Feb 3 19:58:47 Suse101 kernel: Vendor: SONY Model: DVD RW DRU-710A
Rev: BY03
Feb 3 19:58:47 Suse101 kernel: Type: CD-ROM
ANSI SCSI revision: 00
Feb 3 19:58:47 Suse101 kernel: usb-storage: device scan complete
Feb 3 19:58:47 Suse101 kernel: sr0: scsi3-mmc drive: 48x/48x writer cd/rw
xa/form2 cdda tray
Feb 3 19:58:47 Suse101 kernel: sr 0:0:0:0: Attached scsi CD-ROM sr0
Feb 3 19:58:47 Suse101 kernel: sr 0:0:0:0: Attached scsi generic sg0 type 5

Got these 2 lines after I put in a disk, and it shows mounted on the screen
with an icon..

Feb 3 20:01:33 Suse101 kernel: ISO 9660 Extensions: Microsoft Joliet Level 3
Feb 3 20:01:33 Suse101 kernel: ISO 9660 Extensions: RRIP_1991A

Why can't it be so simple with the memory stick?
Do I need to format it?
It does work once it gets mounted, and also works fine on XP and W2k.

Mike
--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx

< Previous Next >
Follow Ups