Mailinglist Archive: opensuse (2831 mails)

< Previous Next >
Re: [SLE] Getting SuSE 10.1 recogising my SATA disk.
  • From: Bruce Marshall <bmarsh@xxxxxxxxxx>
  • Date: Sat, 15 Jul 2006 13:22:47 -0400
  • Message-id: <200607151322.47773.bmarsh@xxxxxxxxxx>
On Saturday 15 July 2006 12:11, Bruce Marshall wrote:
> On Saturday 15 July 2006 11:48, Matt Bottrell wrote:
> > Short and sweet.
> >
> > Long time Linux user.... and been using both RH and SuSE for many years.
> >
> > Finally bought a new machine (AMD AM2 socket based (Pacifica support).
> >
> > Anyway... time to move from my old Dual Core X2 4400+ machine to my new
> > AM2 machine.
> >
> > Motherboard is an Asus M2V (See specs here:
> > http://www.asus.com/products4.aspx?modelmenu=2&model=1171&l1=3&l2=101&l3=
> >30 5)
> >
> > Stuck in a Seagate 500GB SATA-II disk.
> >
> > SATA chipsets on MB are as follows:
> >
> > * VIA(r) VT8237A South Bridge:
> > 2 x UltraDMA 133/100/66/33
> > 2 x Serial ATA with RAID 0, RAID 1, JBOD
> > * Marvell 88SE6121:
> > 1 x Serial ATAI/II
> > 1 x External Serial ATA 3Gb/s hard disk (SATA On-the-Go)
> >

I'm about out of tricks. You say that the 10.0 install went ok? Hmmm

How about booting the 10.1 rescue system and see if that sees the drives.

And do an lsscsi when you get it booted.. And maybe a hwinfo --disk


--
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@xxxxxxxx
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@xxxxxxxx


< Previous Next >
This Thread
Follow Ups