Mailinglist Archive: opensuse (3337 mails)

< Previous Next >
OpenSuse 10.0 /HALD
  • From: "Otto Rodusek (AP-SGP)" <otto@xxxxxxxxxxxxxx>
  • Date: Tue, 11 Apr 2006 15:59:46 +0800
  • Message-id: <443B61F2.2050309@xxxxxxxxxxxxxx>
Hi,

I hope I have the correct forum, and apologize in advance if I don't !!!

I have installed OpenSuse 10.0 (64bit) and although everything I configured is working correctly - th logs themselves are not.

HALD
======

When I connect an external HDD via an external USB-2 HHD, it recognizes the drive as sda and I'm able to mount it and use it normally without any problem except as follows:

When I check the logs (/varlog/messages), I notice that it fills the log file very quickly (100mb ++ - so I have to clear it regularly and quickly) with the following messages from the hal-daemon:

Apr 11 15:58:21 rentsch-asia kernel: usb-storage: queuecommand called
Apr 11 15:58:21 rentsch-asia kernel: usb-storage: *** thread awakened.
Apr 11 15:58:21 rentsch-asia kernel: usb-storage: Command READ_10 (10 bytes)
Apr 11 15:58:21 rentsch-asia kernel: usb-storage: 28 00 00 00 00 08 00 00 01 00
Apr 11 15:58:21 rentsch-asia kernel: usb-storage: Bulk Command S 0x43425355 T 0x606 L 512 F 128 Trg 0 LUN 0 CL 10
Apr 11 15:58:21 rentsch-asia kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 11 15:58:21 rentsch-asia kernel: klogd 1.4.1, ---------- state change ----------
Apr 11 15:58:21 rentsch-asia kernel: usb-storage: Status code 0; transferred 31/31
Apr 11 15:58:21 rentsch-asia kernel: usb-storage: -- transfer complete
Apr 11 15:58:21 rentsch-asia kernel: usb-storage: Bulk command transfer result=0
Apr 11 15:58:21 rentsch-asia kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries
Apr 11 15:58:21 rentsch-asia kernel: usb-storage: Status code 0; transferred 512/512
Apr 11 15:58:21 rentsch-asia kernel: usb-storage: -- transfer complete
Apr 11 15:58:21 rentsch-asia kernel: usb-storage: Bulk data transfer result 0x0
Apr 11 15:58:21 rentsch-asia kernel: usb-storage: Attempting to get CSW...
Apr 11 15:58:21 rentsch-asia kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 11 15:58:21 rentsch-asia kernel: usb-storage: Status code 0; transferred 13/13
Apr 11 15:58:21 rentsch-asia kernel: usb-storage: -- transfer complete
Apr 11 15:58:21 rentsch-asia kernel: usb-storage: Bulk status result = 0
Apr 11 15:58:21 rentsch-asia kernel: usb-storage: Bulk Status S 0x53425355 T 0x606 R 0 Stat 0x0
Apr 11 15:58:21 rentsch-asia kernel: usb-storage: scsi cmd done, result=0x0
Apr 11 15:58:21 rentsch-asia kernel: usb-storage: *** thread sleeping.
Apr 11 15:58:21 rentsch-asia kernel: usb-storage: queuecommand called
Apr 11 15:58:21 rentsch-asia kernel: usb-storage: *** thread awakened.
Apr 11 15:58:21 rentsch-asia kernel: usb-storage: Command READ_10 (10 bytes)

And the messages just go on and on and on and on......!!!!

Any way to switch this off????



< Previous Next >
This Thread
  • No further messages