Mailinglist Archive: opensuse (3337 mails)

< Previous Next >
Re: [SLE] WIRELESS CARD SET UP
  • From: Maura Edeweiss Monville <memonvil@xxxxxxxxxxxxxxxx>
  • Date: Wed, 12 Apr 2006 23:48:13 -0500 (CDT)
  • Message-id: <Pine.GSO.4.58.0604122345290.25524@xxxxxxxxxxxxxxxxxxxxx>


On Thu, 13 Apr 2006, Joe Morris (NTM) wrote:

> Maura Edeweiss Monville wrote:
> > Here is the answer to your question:
> >
> >
> > mauede@linux:~> /sbin/route -n
> > Kernel IP routing table
> > Destination Gateway Genmask Flags Metric Ref Use
> > Iface
> > 131.225.92.0 0.0.0.0 255.255.255.0 U 0 0 0
> > eth0
> > 131.225.94.0 0.0.0.0 255.255.254.0 U 0 0 0
> > eth1
> > 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0
> > eth0
> > 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
> > 0.0.0.0 131.225.92.200 0.0.0.0 UG 0 0 0
> > eth0
> >
> >
> OK, as I suspected, the gateway is setup by DHCP running on eth0. Is
> your ethernet also still plugged in?

It was not when I ried the wireless connection.
Not it is ... in order to read my e-mail.

> > How and where (YAST ?) can I set both network adapters to
> > STARTMODE=ifplugd (IIRC) ?
> >
> OK, go to Yast, Network Devices, Network Card, Hit Change in the section
> of Already Configured Devices, Click on your devices and the Edit, Go to
> Advanced, Detailed Settings, and choose Device Activation at Cable
> Connection. You can check by going to System, etc/sysconfig Editor,
> Hardware, Network, <adapter ID>, STARTMODE. Just this last weekend I
> reinstalled 9.3 on my daughter's laptop, and noticed the same. Even
> though ifplugd is not a listed choice, that was what her ethernet was
> set to, and I was wanting ifplugd to control both, and that fixed this
> exact problem for hers. HTH.

I will try.
Thank you.
Maura
>
>
> --
> Joe Morris
> Registered Linux user 231871
>
>
>
>
>
>
> --
> Check the headers for your unsubscription address
> For additional commands send e-mail to suse-linux-e-help@xxxxxxxx
> Also check the archives at http://lists.suse.com
> Please read the FAQs: suse-linux-e-faq@xxxxxxxx
>
>

< Previous Next >