Mailinglist Archive: opensuse (3666 mails)

< Previous Next >
Re: [SLE] 9.2 vs 9.3
  • From: Carl William Spitzer IV <cwsiv@xxxxxxxxxxxxx>
  • Date: Sun, 13 Mar 2005 16:55:26 -0800
  • Message-id: <1110752865.4391.0.camel@xxxxxxxxxx>
On Fri, 2005-03-11 at 10:23, Randall R Schulz wrote:
> CWSIV,
>
> On Friday 11 March 2005 10:02, Carl William Spitzer IV wrote:
> > A friend is trying to get a multiple processor system to work with
> > 9.2 with a Adaptec 2940 ultra wide scsi 2. While it runs the system
> > is slower than under 8.2 pro. He has checked the Adaptec site,
> > reinstalled twice, updated all to no avail.
> >
> > Will 9.3 comming out so early solve these issues?
>
> This question cannot possibly be answered with the information given.

Motherboard ABIT VH6-II - SMP

http://www2.abit.com.tw/

Duel Coppermine PIII - 1GZ

500 Megabytes of memory

Adaptec 2940UW UltraWide SCSI Adapter

Adaptec 2940U2W (or AHA-2940U2W)

7500 RPM SCSI Disks

Matrox MGA PCI Display card


>From the boot log

6>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<4> <Adaptec 2940 Ultra2 SCSI adapter>
<4> aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
<4>
<4>(scsi0:A:0): 80.000MB/s transfers (40.000MHz, offset 30, 16bit)
<5> Vendor: IBM Model: DNES-309170W Rev: SAH0
<5> Type: Direct-Access ANSI SCSI revision: 03
<4>scsi0:A:0:0: Tagged Queuing enabled. Depth 32
<5>SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB)
<5>SCSI device sda: drive cache: write back
<6> sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
<5>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
<4>(scsi0:A:4): 20.000MB/s transfers (20.000MHz, offset 15)
<5> Vendor: iomega Model: jaz 2GB Rev: E.17
<5> Type: Direct-Access ANSI SCSI revision: 02
<5>Attached scsi removable disk sdb at scsi0, channel 0, id 4, lun 0
<4>(scsi0:A:6): 80.000MB/s transfers (40.000MHz, offset 127, 16bit)
<5> Vendor: QUANTUM Model: ATLAS10K3_36_WLS Rev: 020W
<5> Type: Direct-Access ANSI SCSI revision: 03

--
___ _ _ _ ____ _ _ _
| | | | [__ | | |
|___ |_|_| ___] | \/


< Previous Next >