Mailinglist Archive: opensuse (4547 mails)

< Previous Next >
RE: [SLE] scsi dat drive config
  • From: <fareed@xxxxxxxxxxx>
  • Date: Mon, 24 May 2004 14:31:26 +0200
  • Message-id: <PIEDKKBAKBOPFLHHDCAPIENPCCAA.fareed@xxxxxxxxxxx>
It says device does not exist on st0, rStp0, checked all.
The SCSI bios picks up the tape drive, but nothing...


-----Original Message-----
From: Graham Smith [mailto:gqs@xxxxxxxxxxxx]
Sent: Thursday, May 20, 2004 2:10 PM
To: suse-linux-e@xxxxxxxx
Subject: Re: [SLE] scsi dat drive config

On Thu, 20 May 2004 20:27, fareed@xxxxxxxxxxx wrote:
> Hi,
> I've just installed a Adaptec 2940 SCSI controller in my SuSE 8 Enterprise
> box.
> Its picks the card ok. I also have a 12/24GB SCSI Dat Drive, it does not
> pick this up.
> Any idea's or advice? The SCSI id is set to 1 on the DAT Drive.
> In previous versions on Unix, i used mkdev tape? mkdev tape does not work
> on SuSE.
> Can anyone help?
> Thanks in advance
> Fareed

I think you will find the tape devices as
/dev/nst0 - non rewind


Graham Smith

Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@xxxxxxxx
Also check the archives at
Please read the FAQs: suse-linux-e-faq@xxxxxxxx

< Previous Next >