Mailinglist Archive: opensuse (4053 mails)

< Previous Next >
Re: [SLE] Lan question
Seems its what im looking for
very very thankful, a lot ot thanks craig
----- Original Message -----
From: "Craig Sampson" <craig@xxxxxxxxxxx>
To: <suse-linux-e@xxxxxxxx>
Sent: Thursday, August 09, 2001 11:36 AM
Subject: Re: [SLE] Lan question


> ntop might be closer to what you want. As I recall it shows
> percentages of bandwidth used by individual machines in real time.
> I'm not sure if there is a logging function but there might be.
>
> Cheers,
> Craig
>
>
>
> On Thu, 9 Aug 2001 10:05:40 +0200, Felipe Blanco wrote:
>
> >First of all, thanx Terence ;)
> >tor,thanx for the info,but my router is not propietary,its property
> of the
> >carrier , in this case BT.
> >And this way they doesnt give any access to the router. :(
> >Mmmm,after i try nload like Jaakko said i must say that doesnt make
> what i
> >want
> >This is the output of nload
> >Device: eth0
> >----------------
> >Total In: 2259.93 MB
> Total Out:
> >1195.70 MB
> >Current In: 8.05 kBit/s
> Current Out:
> >0.67 kBit/s
> > (min 4.03, avg 18.31, max 54.90)
> (min 0.00,
> >avg 64.21, max 631.36)
> >
> >This info i can watch it in iptraf....and more detailed but not
> like i want
> >:(
> >Imagine...a network with 50 workstations...i want to know in a
> period of
> >time what machine demands more bandwith....not the total of the
> bandwith
> >demanded every time.
> >
> >Thanx all for the answers
> >
> >----- Original Message -----
> >From: "Tor Sigurdsson" <tosi@xxxxxxxxxxxxxxxxxxxx>
> >To: "Felipe Blanco" <iolistas@xxxxxxxxxxxxx>
> >Cc: <suse-linux-e@xxxxxxxx>
> >Sent: Wednesday, August 08, 2001 9:05 PM
> >Subject: Re: [SLE] Lan question
> >
> >
> >>
> >> Hi,
> >>
> >> As you have a cisco router, it's a pice of cake :)
> >>
> >> Here is a simulated session:
> >>
> >> user@host:~ > telnet router
> >> Trying 192.168.0.254...
> >> Connected to router.
> >> Escape character is '^]'.
> >>
> >>
> >> User Access Verification
> >>
> >> Password:
> >> router>ena
> >> Password:
> >> router#conf te
> >> Enter configuration commands, one per line. End with CNTL/Z.
> >> router(config)#int eth0
> >> router(config-if)#ip accounting output-packets
> >> router(config-if)#^Z <--- here I press control and Z
> >> router#wr mem
> >> router#sh ip acco
> >> Source Destination Packets
> Bytes
> >> 10.0.0.1 100.200.100.1 97
> 11762
> >> 10.0.0.2 200.200.100.100 50
> 14436
> >>
> >> Accounting data age is 2
> >> router#exit
> >>
> >>
> >> As you can see, it's simplicity itself. The "ip accounting
> output-packets"
> >> entry only has to be set once. To stop accounting, use "no ip..."
> >>
> >> To clear the accounting cache use "clear ip acco" at the
> "router#" prompt.
> >>
> >> -tosi
> >>
> >>
> >> ann mi vikudagur 08 g£st 2001 17:43 skrifa ir £:
> >> > I have a lan with up to 50 hosts,most of them are windoze...
> >> > All go out through a cisco 2610 ....
> >> >
> >> > I know there is one person in my office that spend most of the
> time
> >> > downloading big files,like movies,videos and other stuff that
> have a lot
> >of
> >> > size..
> >> > When this person starts the "party" the connection gets slow
> and slow...
> >> >
> >> > My answer is ...is there anyway to find out what machine is
> "eating"
> >most
> >> > percent of bandwith ??
> >> >
> >> > The incoming traffic pass through a ethernet in a fw,so i only
> need a
> >tool
> >> > like iptraf or something like this...to know wich of the 50
> hosts is
> >> > demanding more bandwith than others
> >> >
> >> > I dont know if i explain well the question,my english is not
> like a
> >native
> >> > , i know!
> >> >
> >> > Thanx :)
> >>
> >> --
> >> To unsubscribe send e-mail to suse-linux-e-unsubscribe@xxxxxxxx
> >> For additional commands send e-mail to suse-linux-e-help@xxxxxxxx
> >> Also check the FAQ at http://www.suse.com/support/faq and the
> >> archives at http://lists.suse.com
> >>
> >
> >
> >--
> >To unsubscribe send e-mail to suse-linux-e-unsubscribe@xxxxxxxx
> >For additional commands send e-mail to suse-linux-e-help@xxxxxxxx
> >Also check the FAQ at http://www.suse.com/support/faq and the
> >archives at http://lists.suse.com
> >
> >
>
>
> ============================================
> Craig Sampson
>
> Professional Systems Integration Pty Ltd
>
> Email: craig@xxxxxxxxxxx
> Phone: (08) 9444 5587
> Fax : (08) 9444 5175
> ============================================
>
>
>
> --
> To unsubscribe send e-mail to suse-linux-e-unsubscribe@xxxxxxxx
> For additional commands send e-mail to suse-linux-e-help@xxxxxxxx
> Also check the FAQ at http://www.suse.com/support/faq and the
> archives at http://lists.suse.com
>


< Previous Next >
References