RE: [SLE] Unable to configure internal modem (conexant 56kbps)

Berge, Harry ten

6 Jan 2003 6 Jan '03

08:19

I have a conexant modem and I do have it working! There is someone who has created a general conexant driver. You must build it from source and load the module and you have your conexant modem working! However, currently I am at work, and I have the conexant modem at home :-( I will find it out and mail OR the link, OR the source (because I think I have this at home). Regards Harry

...

-----Original Message----- From: Rohit [SMTP:rohits@mahindrabt.com] Sent: Monday, January 06, 2003 9:10 AM To: SuSe Subject: Re: [SLE] Unable to configure internal modem (conexant 56kbps)

On Mon, 6 Jan 2003, Raghavendra R wrote:

...
I recently installed SuSE Linux 8.0 on my Intel P4 2 Ghz m/c. I also installed an internal modem (DLINK: DFM560IS++, 56Kbps Conexant internal

I have the same piece of hardware but I am unable to do the same myself. The Modem simply does not have a driver in Linux. Not even from DLink's official website.

Rohit

********************************************************* Disclaimer

This message (including any attachments) contains confidential information intended for a specific individual and purpose, and is protected by law. If you are not the intended recipient, you should delete this message and are hereby notified that any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly prohibited.

********************************************************* Visit us at http://www.mahindrabt.com

-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com

Show replies by date

oeren＠ykb.com

6 Jan 6 Jan

08:27

New subject: [SLE] Unable to configure internal modem (conexant 56kbps)

I also use Conexant HCF modem at home. What you need is only a rpm which can be found at this site : http://www.mbsi.ca/cnxtlindrv/ This site is linked from Conexant. If the rpm doesn't work, dwld the generic source and install it. Hope it helps.. "Berge, Harry ten" : I have a conexant modem and I do have it working! There is someone who has created a general conexant driver. You must build it from source and load the module and you have your conexant modem working! However, currently I am at work, and I have the conexant modem at home :-( I will find it out and mail OR the link, OR the source (because I think I have this at home). Regards Harry

...

-----Original Message----- From: Rohit [SMTP:rohits@mahindrabt.com] Sent: Monday, January 06, 2003 9:10 AM To: SuSe Subject: Re: [SLE] Unable to configure internal modem (conexant 56kbps)

On Mon, 6 Jan 2003, Raghavendra R wrote:

...
I recently installed SuSE Linux 8.0 on my Intel P4 2 Ghz m/c. I also installed an internal modem (DLINK: DFM560IS++, 56Kbps Conexant internal

I have the same piece of hardware but I am unable to do the same myself. The Modem simply does not have a driver in Linux. Not even from DLink's official website.

Rohit

********************************************************* Disclaimer

This message (including any attachments) contains confidential information intended for a specific individual and purpose, and is protected by law. If you are not the intended recipient, you should delete this message and are hereby notified that any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly prohibited.

********************************************************* Visit us at http://www.mahindrabt.com

-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com

-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com OGUZ EREN YAPI VE KREDI BANKASI A.S. / TEKNOLOJI YONETIMI Tel : 262 647 21 29 Fax : 262 647 17 12 www.ykteknoloji.com ________________________________________________________________________________________________________________ Bu mesajda, yalnizca muhatabini ilgilendiren, kisiye veya kuruma ozel bilgiler yer aliyor olabilir. Mesajin muhatabi degilseniz, icerigini ve varsa ekindeki dosyalari kimseye aktarmayiniz ya da kopyalamayiniz. Boyle bir durumda lutfen gondereni uyarip, mesaji imha ediniz. Gostermis oldugunuz hassasiyetten oturu tesekkür ederiz. This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorised copying, disclosure or distribution of the material in this e-mail is strictly forbidden. Thank you for your co-operation.

Raghavendra R

09:22

New subject: [SLE] Unable to configure internal modem (conexant 56kbps)

Hi, Thanks for the info. I will download and try it out. I have one more question. I presume the Conexant internal modem is a completely software modem. Is it true that software modems do not perform as well as the external modems? Raghav oeren@ykb.com wrote:

...

I also use Conexant HCF modem at home. What you need is only a rpm which can be found at this site :

http://www.mbsi.ca/cnxtlindrv/

This site is linked from Conexant. If the rpm doesn't work, dwld the generic source and install it.

Hope it helps..

"Berge, Harry ten" : I have a conexant modem and I do have it working! There is someone who has created a general conexant driver. You must build it from source and load the module and you have your conexant modem working!

However, currently I am at work, and I have the conexant modem at home :-( I will find it out and mail OR the link, OR the source (because I think I have this at home).

Regards Harry

...
-----Original Message----- From: Rohit [SMTP:rohits@mahindrabt.com] Sent: Monday, January 06, 2003 9:10 AM To: SuSe Subject: Re: [SLE] Unable to configure internal modem

(conexant

...
56kbps)

On Mon, 6 Jan 2003, Raghavendra R wrote:

...
I recently installed SuSE Linux 8.0 on my Intel P4 2 Ghz m/c. I also installed an internal modem (DLINK: DFM560IS++, 56Kbps Conexant

internal

...
I have the same piece of hardware but I am unable to do the same myself. The Modem simply does not have a driver in Linux. Not even from DLink's official website.

Rohit

********************************************************* Disclaimer

This message (including any attachments) contains confidential information intended for a specific individual and purpose, and is protected by law. If you are not the intended recipient, you should delete this message and are hereby notified that any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly prohibited.

********************************************************* Visit us at http://www.mahindrabt.com

-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com

oeren＠ykb.com

09:26

New subject: [SLE] Unable to configure internal modem (conexant 56kbps)

Well, i never used a real modem with my connection at home; so i can't tell you the difference, but i use conexant hcf with zero problem. The drivers for linux work excellently, although they are beta versions. I didn't think conexant hcf is completely sw, i heard it's half-sw solution. Anyway i'm not sure about it.. Raghavendra R : Hi, Thanks for the info. I will download and try it out. I have one more question. I presume the Conexant internal modem is a completely software modem. Is it true that software modems do not perform as well as the external modems? Raghav oeren@ykb.com wrote: I also use Conexant HCF modem at home. What you need is only a rpm which can be found at this site : http://www.mbsi.ca/cnxtlindrv/ This site is linked from Conexant. If the rpm doesn't work, dwld the generic source and install it. Hope it helps.. "Berge, Harry ten" : I have a conexant modem and I do have it working! There is someone who has created a general conexant driver. You must build it from source and load the module and you have your conexant modem working! However, currently I am at work, and I have the conexant modem at home :-( I will find it out and mail OR the link, OR the source (because I think I have this at home). Regards Harry -----Original Message----- From: Rohit [SMTP:rohits@mahindrabt.com] Sent: Monday, January 06, 2003 9:10 AM To: SuSe Subject: Re: [SLE] Unable to configure internal modem (conexant 56kbps) On Mon, 6 Jan 2003, Raghavendra R wrote: I recently installed SuSE Linux 8.0 on my Intel P4 2 Ghz m/c. I also installed an internal modem (DLINK: DFM560IS++, 56Kbps Conexant internal I have the same piece of hardware but I am unable to do the same myself. The Modem simply does not have a driver in Linux. Not even from DLink's official website. Rohit ********************************************************* Disclaimer This message (including any attachments) contains confidential information intended for a specific individual and purpose, and is protected by law. If you are not the intended recipient, you should delete this message and are hereby notified that any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly prohibited. ********************************************************* Visit us at http://www.mahindrabt.com -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com OGUZ EREN YAPI VE KREDI BANKASI A.S. / TEKNOLOJI YONETIMI Tel : 262 647 21 29 Fax : 262 647 17 12 www.ykteknoloji.com ________________________________________________________________________________________________________________ Bu mesajda, yalnizca muhatabini ilgilendiren, kisiye veya kuruma ozel bilgiler yer aliyor olabilir. Mesajin muhatabi degilseniz, icerigini ve varsa ekindeki dosyalari kimseye aktarmayiniz ya da kopyalamayiniz. Boyle bir durumda lutfen gondereni uyarip, mesaji imha ediniz. Gostermis oldugunuz hassasiyetten oturu tesekkür ederiz. This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorised copying, disclosure or distribution of the material in this e-mail is strictly forbidden. Thank you for your co-operation.

Raghavendra R

10:18

New subject: [SLE] Unable to configure internal modem (conexant 56kbps)

Hi, Thanks to all who have replied to this topic. I think my Conexant internal modem is a HSF modem. What is the optimum speed at which i should connect to the internet if my telephone line speed is around 28 Kbps? Raghav oeren@ykb.com wrote:

...

Well, i never used a real modem with my connection at home; so i can't tell you the difference, but i use conexant hcf with zero problem. The drivers for linux work excellently, although they are beta versions.

I didn't think conexant hcf is completely sw, i heard it's half-sw solution. Anyway i'm not sure about it..

Raghavendra R :

Hi,

Thanks for the info. I will download and try it out. I have one more question. I presume the Conexant internal modem is a completely software modem. Is it true that software modems do not perform as well as the external modems?

Raghav

oeren@ykb.com wrote: I also use Conexant HCF modem at home. What you need is only a rpm which can be found at this site :

http://www.mbsi.ca/cnxtlindrv/

This site is linked from Conexant. If the rpm doesn't work, dwld the generic source and install it.

Hope it helps..

"Berge, Harry ten" : I have a conexant modem and I do have it working! There is someone who has created a general conexant driver. You must build it from source and load the module and you have your conexant modem working!

However, currently I am at work, and I have the conexant modem at home :-( I will find it out and mail OR the link, OR the source (because I think I have this at home).

Regards Harry

-----Original Message----- From: Rohit [SMTP:rohits@mahindrabt.com] Sent: Monday, January 06, 2003 9:10 AM To: SuSe Subject: Re: [SLE] Unable to configure internal modem

(conexant

56kbps)

On Mon, 6 Jan 2003, Raghavendra R wrote:

I recently installed SuSE Linux 8.0 on my Intel P4 2 Ghz m/c. I also installed an internal modem (DLINK: DFM560IS++, 56Kbps Conexant

internal

I have the same piece of hardware but I am unable to do the same myself. The Modem simply does not have a driver in Linux. Not even from DLink's official website.

Rohit

********************************************************* Disclaimer

This message (including any attachments) contains confidential information intended for a specific individual and purpose, and is protected by law. If you are not the intended recipient, you should delete this message and are hereby notified that any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly prohibited.

********************************************************* Visit us at http://www.mahindrabt.com

7783

Age (days ago)

7783

Last active (days ago)

List overview

Download

4 comments

3 participants

participants (3)

Berge, Harry ten
oeren＠ykb.com
Raghavendra R