[SLE] 20' TFT Belinea 16/10 format installation
Hi all, I have two identical PC's. One I installed with SUSE 10.1 purchased boxed Novell version with a 19" TFT attached. Later I got a Belinea 20" TFT 102035W 16/10 format. I looked in the hardware side of yast for a suitable driver and could only find the Belinea 102030 with the nearest config. It sort of worked, requiring after the screen saver came on, that the automatic adjust button be pressed to get it from displaying the bottom right hand quarter in the top left hand quarter to shift to a full screen. Today I installed SUSE 10.1 on the same hardware on PC Nr2 (this time with the 20" 201035W attached though) and when a monitor was selected, it offered MAX Belinea 102035W; exactly the right monitor! Having never seen this driver before, I looked at the first system I installed - there is no such entry in the hardware list for MAX monitors (should be between MAXTECH and MEDION as it is in today's installation). Where did the identical hardware (but with the new 102035W TFT attached) and software new installation get the driver from. From the Maxdata.de website there are only '*inf files* and "Microsoft certified" on offer. :-/ Al -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
On Thu, 2006-07-20 at 14:18 +0200, stephan beal wrote:
On Thursday 20 July 2006 13:37, LLLActive@GMX.Net wrote: ...
came on, that the automatic adjust button be pressed to get it from displaying the bottom right hand quarter in the top left hand quarter to shift to a full screen.
i had a similar problem on my SyncMaster 213T. The solution, in my case, is to only use the digital VGA connector and not the analog VGA connector. For some reason this problem only shows up in text mode when the analog connector is in use.
Hi Stephan, a good point. Unfortunately I have to use a KVM (Keyboard-Mouse-Monitor) switch to get onto several Systems, which is only analogue. The second system offered the correct TFT even when using the KVM switch with analogue connectors. But where does the MAX Belinea B102035W entry in the Hardware List for Monitors come from on the second system I installed with the wide TFT attached? It is not even available now after the installation was done with a normal monitor on the first system. :-/ Al PS: I copied the PM to the list for others to follow the problem to a solution. :-) -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
On Thursday 20 July 2006 15:29, LLLActive@GMX.Net wrote: ...
But where does the MAX Belinea B102035W entry in the Hardware List for Monitors come from on the second system I installed with the wide TFT attached? It is not even available now after the installation was done with a normal monitor on the first system.
That, i can't answer. :(
PS: I copied the PM to the list for others to follow the problem to a solution. :-)
Sorry, it wasn't my intention to reply on to you. -- ----- stephan@s11n.net http://s11n.net "...pleasure is a grace and is not obedient to the commands of the will." -- Alan W. Watts
participants (2)
-
LLLActive@GMX.Net
-
stephan beal