On Saturday 23 December 2006 06:31, Istvan Gabor wrote:
Anyway, my MB is a K8T Neo2 - AMD64 and is SATA capable.
Here is the stupid question......Can I add a SATA drive to> this setup and
install 10.2 on it?
.<snip stuff>........... First of all many thanks to all of you who took the time to answer this question.
Hello:
Is this MB an MSI K8T Neo2-F or K8T Neo2-FIR (socket 939)?
Not sure but the manual calls it a MS 6702E and it is the Athlon 939 pin socket.
If it is then its a relatively new MB and you should not have any problem attaching a SATA hard drive.
Yes, maybe 2 years old. There are SATA1 & 2 sockets on the MB. I even got the cables when I purchased the board. I was upgrading and just reused my old ide disks.
Just attach your SATA disk to the SATA1 connector on the MB. Then enter the BIOS and search for a setting like enable SATA disk and set it on. It will says that SATA1 will be Third master hard drive or something similar.
My main concern was if it would work in conjunction with/in addition to the ide controller. Still a little concerned because the mb manual discusses using the SATA drives as serial devices using the southbridge VT8237 and or as a raid setup using the Promise 20579 chipset. A little confusing to me as I really don't know hardware all that well.
After inserting the 10.2 install DVD and rebooting the computer (don't forget save the new BIOS settings) the install system should recognize the new drive as 'sda' (not hdx).
OK, the bios shows an option to turn on the SATA controller but nothing else. Guess I should just buy a drive and try it following your advice.
I downloaded the MB manual but it is not detailed enough where to find SATA setup.
Cheers, IG
Thanks, Bob S.
___________________________________________________________ Ajándékozz személyre szabott zenei válogatást karácsonyra! http://zenearuhaz.t-online.hu/index.php?m=xmasminishop -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org