On Sunday, June 27, 2010 12:58:48 pm Felix Miata wrote:
On 2010/06/27 12:36 (GMT+0700) C. Brouerius van Nidek composed:
After some technical problems with my Pentium III mainboard I ran snip Got it working but I am still not able to repair my 11.2. The information very early after the boot of grub is more or less, could not find /dev/sdb3 snip I have checked the partition (ext4) with fsck, looked at the partition with Yast but was not able to see anything out of the ordinary. Can somebody give me a solution?
Not without more information. snip As far as I can see, the drive is still recognised as sdb3 in my new setup. I have compared the two sets of data and do not see a problem. Here follows the information I gathered:
Data from the 11.2 partition. ====================== device.map ------------------ (hd1) /dev/disk/by-id/ata-SAMSUNG_SV0412H_0626J1FW314667 (hd0) /dev/disk/by-id/ata-ST34313A_6CR05V3W fstab _________ LABEL=suse112november / ext4 acl,user_xattr 1 1 LABEL=home /home ext3 acl,user_xattr 1 2 LABEL=extra2 /extra2 ext3 defaults 1 2 /dev/disk/by-id/ata-SAMSUNG_SV0412H_0626J1FW314667-part5 swap swap defaults 0 0 /dev/disk/by-id/ata-ST34313A_6CR05V3W-part1 /drdos vfat users,gid=users,umask=0002,utf8=true 0 0 proc /proc proc defaults 0 0 sysfs /sys sysfs noauto 0 0 debugfs /sys/kernel/debug debugfs noauto 0 0 usbfs /proc/bus/usb usbfs noauto 0 0 devpts /dev/pts devpts mode=0620,gid=5 0 0 /dev/disk/by-id/ata-ST34313A_6CR05V3W-part2 /extra1 auto noauto,user 0 0 LABEL=suse111 /suse11.1 auto noauto,user 0 0 LABEL=reserve3 /reserve3 ext3 defaults 1 2 LABEL=suselxde /suselxde ext3 defaults 1 2 /dev/disk/by-id/ata-ST320413A_7ED1TGXF-part5 swap swap defaults 0 0 /dev/disk/by-id/ata-ST320413A_7ED1TGXF-part1 /drdos2 vfat users,gid=users,umask=0002,utf8=true 0 0 /dev/disk/by-id/ata-ST320413A_7ED1TGXF-part6 /xtra1 ext3 defaults 1 2 /dev/disk/by-id/ata-ST320413A_7ED1TGXF-part7 /usr ext3 acl,user_xattr 1 1 Grub.conf __________ setup --stage2=/boot/grub/stage2 --force-lba (hd0) (hd1,0) quit menu.lst __________ # Modified by YaST2. Last modification on Mon Apr 12 22:16:32 WIT 2010 # THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader # Configure custom boot parameters for updated kernels in /etc/sysconfig/bootloader default 0 timeout 8 gfxmenu (hd1,2)/boot/message ###Don't change this comment - YaST2 identifier: Original name: linux### title Desktop -- openSUSE 11.2 - 2.6.31.12-0.2 root (hd1,2) kernel /boot/vmlinuz-2.6.31.12-0.2-desktop root=/dev/disk/by- label/suse112november repair=1 resume=/dev/disk/by-id/ata- SAMSUNG_SV0412H_0626J1FW314667-part5 lapic splash=silent quiet showopts vga=0x314 initrd /boot/initrd-2.6.31.12-0.2-desktop ###Don't change this comment - YaST2 identifier: Original name: failsafe### title Failsafe -- openSUSE 11.2 - 2.6.31.12-0.2 root (hd1,2) kernel /boot/vmlinuz-2.6.31.12-0.2-desktop root=/dev/sdb3 showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 x11failsafe vga=0x314 initrd /boot/initrd-2.6.31.12-0.2-desktop ###Don't change this comment - YaST2 identifier: Original name: windows### title DrDos rootnoverify (hd0,0) chainloader +1 title openSUSE11.1 root (hd1,2) kernel /boot/vmlinuz root=/dev/sdb1 repair=1 lapic splash=silent quiet showopts vga=0x314 initrd /boot/initrd ============================== Here the same output from the 11.3RC1. ============================== device.map ------------------ (hd1) /dev/disk/by-id/ata-SAMSUNG_SV0412H_0626J1FW314667 (hd0) /dev/disk/by-id/ata-ST34313A_6CR05V3W fstab _________ /dev/disk/by-id/ata-SAMSUNG_SV0412H_0626J1FW314667-part5 swap swap defaults 0 0 /dev/disk/by-id/ata-SAMSUNG_SV0412H_0626J1FW314667-part1 / ext3 acl,user_xattr 1 1 /dev/disk/by-id/ata-SAMSUNG_SV0412H_0626J1FW314667-part8 /home ext3 defaults 1 2 /dev/disk/by-id/ata-ST34313A_6CR05V3W-part1 /DrDos vfat users,gid=users,umask=0002,utf8=true 0 0 proc /proc proc defaults 0 0 sysfs /sys sysfs noauto 0 0 debugfs /sys/kernel/debug debugfs noauto 0 0 usbfs /proc/bus/usb usbfs noauto 0 0 devpts /dev/pts devpts mode=0620,gid=5 0 0 /dev/disk/by-id/ata-ST34313A_6CR05V3W-part2 /extra1 ext3 defaults 1 2 /dev/disk/by-id/ata-SAMSUNG_SV0412H_0626J1FW314667-part9 /extra2 ext4 defaults 1 2 /dev/disk/by-id/ata-SAMSUNG_SV0412H_0626J1FW314667-part6 /reserve3 ext3 defaults 1 2 /dev/sdb3 /suse112 ext4 defaults 1 2 /dev/disk/by-id/ata-SAMSUNG_SV0412H_0626J1FW314667-part7 /suselxde ext3 defaults 1 2 /dev/disk/by-id/ata-ST320413A_7ED1TGXF-part5 swap swap defaults 0 0 /dev/disk/by-id/ata-ST320413A_7ED1TGXF-part1 /DrDos2 vfat users,gid=users,umask=0002,utf8=true 0 0 /dev/disk/by-id/ata-ST320413A_7ED1TGXF-part6 /xtra1 ext3 defaults 1 2 Grub.conf __________ setup --stage2=/boot/grub/stage2 --force-lba (hd0) (hd1,0) quit menu.lst __________ # Modified by YaST2. Last modification on Sat Jun 26 21:53:47 WIT 2010 # THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader # Configure custom boot parameters for updated kernels in /etc/sysconfig/bootloader default 0 timeout 8 gfxmenu (hd1,0)/boot/message ###Don't change this comment - YaST2 identifier: Original name: linux### title openSUSE 11.3 RC 1 - 2.6.34-9 root (hd1,0) kernel /boot/vmlinuz-2.6.34-9-default root=/dev/disk/by-id/ata- SAMSUNG_SV0412H_0626J1FW314667-part1 resume=/dev/disk/by-id/ata- SAMSUNG_SV0412H_0626J1FW314667-part5 splash=silent quiet showopts vga=0x31a initrd /boot/initrd-2.6.34-9-default ###Don't change this comment - YaST2 identifier: Original name: failsafe### title Failsafe -- openSUSE 11.3 RC 1 - 2.6.34-9 root (hd1,0) kernel /boot/vmlinuz-2.6.34-9-default root=/dev/disk/by-id/ata- SAMSUNG_SV0412H_0626J1FW314667-part1 showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe vga=0x31a initrd /boot/initrd-2.6.34-9-default ###Don't change this comment - YaST2 identifier: Original name: Desktop -- openSUSE 11.2 - 2.6.31.12-0.2 (/dev/sdb3)### title Desktop -- openSUSE 11.2 - 2.6.31.12-0.2 (/dev/sdb3) root (hd1,2) configfile /boot/grub/menu.lst ###Don't change this comment - YaST2 identifier: Original name: windows### title DrDos rootnoverify (hd0,0) chainloader +1 ============================ And this is the output from fdisk. =========================== fdisk -l __________ Disk /dev/sdb: 40.1 GB, 40060403712 bytes 255 heads, 63 sectors/track, 4870 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5a375a37 Device Boot Start End Blocks Id System /dev/sdb1 * 1 786 6305512 83 Linux Partition 1 does not end on cylinder boundary. /dev/sdb2 1624 4870 26081527+ f W95 Ext'd (LBA) /dev/sdb3 * 786 1623 6731204 83 Linux /dev/sdb5 1624 1701 626503+ 82 Linux swap/Solaris /dev/sdb6 2981 4870 15181393+ 83 Linux /dev/sdb7 2293 2980 5526328+ 83 Linux /dev/sdb8 1702 2158 3670821 83 Linux /dev/sdb9 2172 2292 971901 83 Linux Partition table entries are not in disk order Disk /dev/sda: 4327 MB, 4327464960 bytes 255 heads, 63 sectors/track, 526 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e13f9 Device Boot Start End Blocks Id System /dev/sda1 1 40 313267 c W95 FAT32 (LBA) Partition 1 does not end on cylinder boundary. /dev/sda2 * 41 526 3903795 83 Linux Disk /dev/sdc: 20.0 GB, 20020396032 bytes 255 heads, 63 sectors/track, 2434 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00028337 Device Boot Start End Blocks Id System /dev/sdc1 * 1 654 5245222 c W95 FAT32 (LBA) Partition 1 does not end on cylinder boundary. /dev/sdc2 * 654 2434 14305851+ f W95 Ext'd (LBA) /dev/sdc5 812 871 481950 82 Linux swap / Solaris /dev/sdc6 872 1524 5245191 83 Linux /dev/sdc7 1525 2434 7309543+ 83 Linux -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org