On Thursday 20 October 2005 22:58, Bernd wrote:
Are there specific password files that I need to tweak? I did add the vnc module to XF86Config as suggested in readme file. Anything else?
Ahah! Found it! That was my problem. I just tried to complicate something really simple.
DO NOT add the vnc module into the XF86Config file!!!
All is well! Tested, rebooted all machines, and tested again from all.
What's next? XWindows VNC and secure remote access via internet are the 2 that strike me as most needful to start with.
Bernd
Okay, what you got now is the KDE Remote Desktop implementation of vnc... The XWindows VNC (Which I've never done!) Would be..... ============= Yep, you guessed it. Adding the vnc module to the XConfig file, (and removing) turning the KDE Remote Desktop off. I Use the Vnc Terminal Server approach, as I don't really want to see what's on the screen down stairs, I just want a graphical environment (or two 8-). It's also easier to setup (I think). Some one else will have to jump in and help you out with that, as I wouldn't know how to set the required password. The Terminal Server process is setup as follows: got to: Yast2->Network Services->Remote Administration There you select "Allow Remote Administration" I would not select "Open firewall port", but the risk is yours. Click finish Now on XP connect with vncviewer to Linux as usual but add ":1" to the end of the linux-ip address. You should get a graphical login just like you do on the linux screen! If you like this, but want bigger desktops, you can go to: Yast2->Network services->Network services (xinetd) There scroll down till you find vnc2, (and possibly vnc3?). Select the line, click "Toggle On/Off Status", Click Finish... Now you can get 1280x1024 screens by using the suffix :2 and 1600x1280 with the suffix :3 Secure Remote access from Internet ======================= my way to do this is via ssh. Now many other people have other ways. Here is how to vnc via ssh from linux: vncviewer -via <remote-user>@<remtoe-ip> localhost:0 (or :1, :2, etc). After entering the remote user's password vnc-window will open up... Of course, under windows it's a good deal more complicated! First we get it working from XP to Linux INSIDE your network, then we mess with your routers! So you need a windows ssh client. Putty is the defacto Freeware standard and it's on the SuSE DVD's. install it. Then you need to open an encrypted tunnel from you XP to Linux that is pointed to the VNC server of your linux. This is down as follows: Start up Putty: - Enter linux host name or linux ip address. - Select ssh. - (in lefthand category tree) select SSH - click Enable Compression (this compresses the data thru the tunnel) - (in lefthand category tree) select Tunnels Now Depending on Which VNC you want to connect to do one or more of the following: Tunnel XWindows VNC or KDE Remote Desktop: - Create a local tunnel from XP port 5950 to linux and from there to localhost:5900 - put 5950 in source port - put localhost:5900 as Destination. - Click add Tunnel Vnc Terminal Server login 1024x768 size - Create a local tunnel from XP port 5951 to linux and from there to localhost:5901 - put 5951 in source port - put localhost:5901 as Destination. - Click add Tunnel Vnc Terminal Server login 1280x1024 size - Create a local tunnel from XP port 5952 to linux and from there to localhost:5902 - put 5952 in source port - put localhost:5902 as Destination. - Click add Tunnel Vnc Terminal Server login 1600x1280 size - Create a local tunnel from XP port 5953 to linux and from there to localhost:5903 - put 5953 in source port - put localhost:5903 as Destination. - Click add After you defined your tunnel(s), You need to save the settings! - (in lefthand category tree) select Session - In Saved Sessions enter a name - Click save Okay... Configuration is done: Now you can start the tunnels by double-Clicking the name in the list under saved sections. You will get a "Dos-Box" (actual your linux shell) where linux will ask you for username and password. After entering then you get the linux prompt, as long as this linux terminal is open the defined tunnels are open. So now you can connect to linux via vnc by connecting to The ports 5950, 5951, 5952, and/or 5953. NOTE: Theese are the entrance ports to the tunnels from your XP to linux; so the ports are on your local XP! So start vnc, enter as address localhost:50, (or :51, etc) and you wil get a Secure (and compresssed) vnc connection to your linux machine. Boy that was a long one.... And I probably confused everbody out there! Oh well, I'll let you get past this before we discuss how to modify your internet router to allows ssh in to your linux box (and thereby allowing you to securely access both your Linux and your XP boxes from the internet!) Jerry