On Wed, Oct 26, 2005 at 08:33:01AM +1000, Steven Lamb wrote:
Marcus Meissner wrote:
On Tue, Oct 25, 2005 at 09:24:14AM +1000, Steven Lamb wrote:
Hi, I have installed Suse 10.0 on my toshiba A70 laptop but I noticed that the camera is not being detected via the USB2 port. I have other devices which are being detected fine via USB2.
Is it detected on the USB 1 port (if you have any)?
What is the "cat /proc/bus/usb/devices" output with the camera attached?
Can you switch the camera mode between Normal and PTP (to PTP if possible).
Ciao, Marcus
Below is the output of the cat. I tried PTP and Normal mode on all USB ports but the camera was still not detected. I tried another USB device and this worked without a problem.
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=04a9 ProdID=30eb Rev= 0.01 S: Manufacturer=Canon Inc. S: Product=Canon Digital Camera C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=64ms
This is the camera in normal mode. The 20D currently will only work in PTP mode... gphoto2 --list-cameras|grep EOS should like the EOS 20D (PTP mode). Ciao, Marcus