Hi, I have installed Suse 10.0 on my toshiba A70 laptop but I noticed that the camera is not being detected via the USB2 port. I have other devices which are being detected fine via USB2. Any help is appreciated. Steve
On Monday 24 October 2005 7:24 pm, Steven Lamb wrote:
Hi, I have installed Suse 10.0 on my toshiba A70 laptop but I noticed that the camera is not being detected via the USB2 port. I have other devices which are being detected fine via USB2.
Any help is appreciated.
I have a 300D but use the card reader built into the 'puter....NO problems. Fred -- Paid purchaser of ALL SuSE Linux releases since 6.x
On Tue, Oct 25, 2005 at 09:24:14AM +1000, Steven Lamb wrote:
Hi, I have installed Suse 10.0 on my toshiba A70 laptop but I noticed that the camera is not being detected via the USB2 port. I have other devices which are being detected fine via USB2.
Is it detected on the USB 1 port (if you have any)? What is the "cat /proc/bus/usb/devices" output with the camera attached? Can you switch the camera mode between Normal and PTP (to PTP if possible). Ciao, Marcus
Marcus Meissner wrote:
On Tue, Oct 25, 2005 at 09:24:14AM +1000, Steven Lamb wrote:
Hi, I have installed Suse 10.0 on my toshiba A70 laptop but I noticed that the camera is not being detected via the USB2 port. I have other devices which are being detected fine via USB2.
Is it detected on the USB 1 port (if you have any)?
What is the "cat /proc/bus/usb/devices" output with the camera attached?
Can you switch the camera mode between Normal and PTP (to PTP if possible).
I think it's running in normal mode. I will test tonight see what the outcome is. Thanks Steve
Steven Lamb wrote:
Can you switch the camera mode between Normal and PTP (to PTP if possible).
it solve the problem with my 350d. in ptp mode, the camera is seen and files can be loaded, it's perfectly seen by digikam thanks jdd -- pour m'écrire, aller sur: http://www.dodin.net http://valerie.dodin.net http://arvamip.free.fr
Marcus Meissner wrote:
On Tue, Oct 25, 2005 at 09:24:14AM +1000, Steven Lamb wrote:
Hi, I have installed Suse 10.0 on my toshiba A70 laptop but I noticed that the camera is not being detected via the USB2 port. I have other devices which are being detected fine via USB2.
Is it detected on the USB 1 port (if you have any)?
What is the "cat /proc/bus/usb/devices" output with the camera attached?
Can you switch the camera mode between Normal and PTP (to PTP if possible).
Ciao, Marcus
Below is the output of the cat. I tried PTP and Normal mode on all USB ports but the camera was still not detected. I tried another USB device and this worked without a problem. T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.13-15-smp ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:13.2 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=04a9 ProdID=30eb Rev= 0.01 S: Manufacturer=Canon Inc. S: Product=Canon Digital Camera C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=64ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.13-15-smp ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:13.1 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.13-15-smp ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:13.0 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
On Wed, Oct 26, 2005 at 08:33:01AM +1000, Steven Lamb wrote:
Marcus Meissner wrote:
On Tue, Oct 25, 2005 at 09:24:14AM +1000, Steven Lamb wrote:
Hi, I have installed Suse 10.0 on my toshiba A70 laptop but I noticed that the camera is not being detected via the USB2 port. I have other devices which are being detected fine via USB2.
Is it detected on the USB 1 port (if you have any)?
What is the "cat /proc/bus/usb/devices" output with the camera attached?
Can you switch the camera mode between Normal and PTP (to PTP if possible).
Ciao, Marcus
Below is the output of the cat. I tried PTP and Normal mode on all USB ports but the camera was still not detected. I tried another USB device and this worked without a problem.
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=04a9 ProdID=30eb Rev= 0.01 S: Manufacturer=Canon Inc. S: Product=Canon Digital Camera C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=64ms
This is the camera in normal mode. The 20D currently will only work in PTP mode... gphoto2 --list-cameras|grep EOS should like the EOS 20D (PTP mode). Ciao, Marcus
Marcus Meissner wrote:
This is the camera in normal mode. The 20D currently will only work in PTP mode...
gphoto2 --list-cameras|grep EOS should like the EOS 20D (PTP mode).
digicam has the eos20d in it's list jdd -- pour m'écrire, aller sur: http://www.dodin.net http://valerie.dodin.net http://arvamip.free.fr
Steven Lamb wrote:
Hi, I have installed Suse 10.0 on my toshiba A70 laptop but I noticed that the camera is not being detected via the USB2 port. I have other devices which are being detected fine via USB2. Any help is appreciated.
same with EOS350D, but I tested this only for this answer, usually I use a CFreader (danelec) without problem jdd -- pour m'écrire, aller sur: http://www.dodin.net http://valerie.dodin.net http://arvamip.free.fr
participants (4)
-
Fred A. Miller
-
jdd
-
Marcus Meissner
-
Steven Lamb