April 2016 - openSUSE Users - openSUSE Mailing Lists

Re: [opensuse] HP Ultrium LTO Compression
by Paul Groves 30 Apr '16

30 Apr '16

the tar -t command only lists the files. Not the sizes. but appending --totals shows the total at the end of the tar output 4352256 (4.1GiB) du -s /srv/media/testfiles 4250656 4.1G So now the files are bigger? Obviously not working still mounting the tape device results in: mount: /dev/st3 is not a block device and it does not mount. using mt status: Tape block size 0 bytes. Density code 0x44 The density code of the lto2 0x42 and lto1 0x40 does this change if the drive is compressed? output of stinit -v -v: Trying to open database '/etc/stinit.def'. Open succeeded. stinit, processing tape 0 Mode 1, name '/dev/nst0' Mode 2, name '/dev/nst0l' Mode 3, name '/dev/nst0m' Mode 4, name '/dev/nst0a' The manufacturer is 'HP', product is 'C7438A', and revision 'V312'. Mode 1 definition: compression=1 stinit, processing tape 1 Mode 1, name '/dev/nst1' Mode 2, name '/dev/nst1l' Mode 3, name '/dev/nst1m' Mode 4, name '/dev/nst1a' The manufacturer is 'HP', product is 'Ultrium 1-SCSI', and revision 'P61D'. Mode 1 definition: compression=1 stinit, processing tape 2 Mode 1, name '/dev/nst2' Mode 2, name '/dev/nst2l' Mode 3, name '/dev/nst2m' Mode 4, name '/dev/nst2a' The manufacturer is 'HP', product is 'Ultrium 2-SCSI', and revision 'S65D'. Mode 1 definition: compression=1 stinit, processing tape 3 Mode 1, name '/dev/nst3' Mode 2, name '/dev/nst3l' Mode 3, name '/dev/nst3m' Mode 4, name '/dev/nst3a' The manufacturer is 'HP', product is 'Ultrium 3-SCSI', and revision 'D22D'. Mode 1 definition: compression=1 stinit, processing tape 4 Initialized 4 tape devices. On 26 April 2016 at 23:59, Ritchie Fraser <euphogeeza(a)gmail.com> wrote: > On Tuesday 26 Apr 2016 21:43:52 you wrote: > >> Hi Ritchie > >> > >> Thanks, so I have made a /etc/stinit.def (Below). and I ran stinit as > >> root which said Initialized 4 tape devices. > >> > >> So now if I run tar -V test-tape -cvWf /dev/st3 /srv/some/data then > >> should compression work? > >> > >> Tar options being > >> -V label > >> -c create > >> -v verbose > >> -W verify > >> -f file > >> > >> Is there quicker a way to test if compression is on other that waiting > >> several hours for a backup? > > > > Backup a smaller directory of known size. > > Then list tape contents using tar > > > > -t or --list option > > (this may just list the files in the current archive file (volume). > > > > Alternatively mount the tape in your file system > > > > mount /dev/st0 /mnt/tape > > > > Then just > > > > ls -lh > > > > Compare the size of the archive file to the size of the directory > > > >> > >> Also, do you know how I can tell tar to split the backup once the tape > >> is full and ask for another tape? > >> > > > > Use -M or --multi-volume options > > > > ( https://www.gnu.org/software/tar/manualhtml_section/tar_79.html ) > > > >> Thanks > >> > >> Paul > >> > >> cat /etc/stinit.def > >> #DAT72 > >> manufaturer=HP model = "C7438A" { > >> mode1 compression=1 > >> } > >> > >> #LTO1 > >> manufaturer=HP model = "Ultrium 1-SCSI" { > >> mode1 compression=1 > >> } > >> > >> #LTO2 > >> manufaturer=HP model = "Ultrium 2-SCSI" { > >> mode1 compression=1 > >> } > >> > >> #LTO3 > >> manufaturer=HP model = "Ultrium 3-SCSI" { > >> mode1 compression=1 > >> } > >> > >> On 22 April 2016 at 23:10, Ritchie Fraser <euphogeeza(a)gmail.com> wrote: > >> > My reply to the [opensuse] list was bounced :-(... > >> > > >> > > >> > > >> > So I've forwarded it (below) > >> > > >> > > >> > > >> > R > >> > > >> > > >> > > >> > ---------- Forwarded Message ---------- > >> > > >> > > >> > > >> > Subject: Re: [opensuse] HP Ultrium LTO Compression > >> > > >> > Date: Friday 22 Apr 2016, 21:29:21 > >> > > >> > From: Ritchie Fraser <euphogeeza(a)gmail.com> > >> > > >> > To: opensuse(a)opensuse.org > >> > > >> > On Friday 22 Apr 2016 13:33:23 Per Jessen wrote: > >> >> Greg Freemyer wrote: > >> >> > I don't recall if you have to add a call stinit during bootup, or if > >> >> > > >> >> > it is automatic. > >> >> > >> >> I've never had to do it. > >> > > >> > Hi Paul, > >> > > >> > > >> > > >> > I remember looking up info for the same issue at a previous company I > >> > worked for... They were using Bacula and the first two links below are > >> > for Bacula documentation... > >> > > >> > > >> > > >> > Ensuring that the Tape Modes Are Properly Set - Linux Only > >> > > >> > >> > http://www.bacula.org/5.2.x-manuals/en/problems/problems/Testing_Your_Tape > >> > _Drive.html#SECTION00435000000000000000 [1] > >> > > >> > > >> > > >> > Tape Hardware Compression and Blocking Size > >> > > >> > >> > http://www.bacula.org/5.2.x-manuals/en/problems/problems/Testing_Your_Tape > >> > _Drive.html#SECTION00436000000000000000 [2] > >> > > >> > > >> > > >> > Backup tape compression > >> > > >> > http://serverfault.com/questions/424936/backup-tape-compression [3] > >> > > >> > > >> > > >> > Open Source Backup - Hardware compression > >> > > >> > >> > https://wiki.zmanda.com/index.php/Hardware_compression#Tape_drive_v.s._Lin > >> > ux_kernel_driver_compression_settings [4] > >> > > >> > > >> > > >> > > >> > > >> > -- > >> > > >> > > >> > > >> > Kind Regards > >> > > >> > > >> > > >> > Ritchie > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > -------- > >> > > >> > [1] > >> > >> > http://www.bacula.org/5.2.x-manuals/en/problems/problems/Testing_Your_Tape > >> > _Drive.html#SECTION00435000000000000000 > >> > > >> > [2] > >> > >> > http://www.bacula.org/5.2.x-manuals/en/problems/problems/Testing_Your_Tape > >> > _Drive.html#SECTION00436000000000000000 > >> > > >> > [3] http://serverfault.com/questions/424936/backup-tape-compression > >> > > >> > [4] > >> > >> > https://wiki.zmanda.com/index.php/Hardware_compression#Tape_drive_v.s._Lin > >> > ux_kernel_driver_compression_settings > >> > > >> > ----------------------------------------- > >> > -- > >> > > >> > > >> > > >> > Kind Regards > >> > > >> > > >> > > >> > Ritchie > >> > > >> > > >> > > >> > Ritchie Fraser BSc (Hons) > >> > > >> > > >> > > >> > Home: +44 (1303) 891767 > >> > > >> > Mobile: +44 (7867) 976708 > >> > > >> > Web: http://www.ritchiefraser.co.uk > > > -- > > > > Kind Regards > > > > Ritchie > > > > Ritchie Fraser BSc (Hons) > > > > Home: +44 (1303) 891767 > > Mobile: +44 (7867) 976708 > > Web: http://www.ritchiefraser.co.uk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 9

[opensuse] Re: Repeatedly having to restart akonadi server after 13.2 upgrade - RESOLVED
by Dennis Gallien 29 Apr '16

29 Apr '16

On Thu, Apr 21 04:10:19 PM Dennis Gallien wrote: > Before the update, I would occasionally get the folder lock up problem > caused by the akonadi server (once or twice every couple days) that > requires the server to be restarted (or log out/log in). > > Following my 13.2 upgrade, the problem has become much, much worse. > Repeatedly when I click on a message in a folder (read or unread), the > folder locks and I get the green Kmail wait screen. At least in the past > the condition would sometimes correct itself after a while and free the > folder; not any longer, I am now forced to restart the server every time. > > When I do the server restart, I always get about 50 error messages in the > mysql error log like this . . . > > 160421 15:08:48 [ERROR] Can't open and lock privilege tables: Table > 'mysql.servers' doesn't exist > 160421 15:08:48 [Warning] Can't open and lock time zone table: Table > 'mysql.time_zone_leap_second' doesn't exist trying to live without them > 160421 15:08:48 [ERROR] Native table 'performance_schema'.'cond_instances' > has the wrong structure > 160421 15:08:48 [ERROR] Native table > 'performance_schema'.'events_waits_current' has the wrong structure > 160421 15:08:48 [ERROR] Native table > > etc. I'm sending this reply to both the kde and user lists as there have been many kmail/akonadi issues posted on both, and what I found may be useful for kmaill users on both lists . . . My plan was to delete all akonadi related files, have the server rebuild them, manually re-populate the account resources, and re-link the mail store directory to the Local Folders resource. Before doing that, I created a full kmail backup with pimsettingsexporter. and for safety sake attempted to create an archive file with the kmail folder archive function. "Attempted" only because the folder archive function failed. Working this problem I stumbled on to what was causing kmail to lock up requiring a server restart: bad message data in some of the folders. The folder archive process will fail when it encounters a message it cannot process. All the user gets is a terse message saying just that, along with the folder name. In the incomplete archive file I could locate the problem folder and the number of messages successfully retrieved before the failing message. In kmail, permanently deleting messages including the likely "bad" message (typically required several iterations), finally enabled the archive process to complete for that folder. This was necessary in 6 of my ~50 local folders. Before proceeding with rebuilding akonadi, in kmail I noticed I could click on a message and kmail did not lock up. I've been rigorously testing this for 2 days and have not had one single lock up. Note that the lock ups did not occur by trying to access a "bad" message. In fact, it happened clicking on a good message in a folder without any problem. Any folder. It seems that just the presence of the bad messages in some folders can create a condition which subsequently causes kmail and/or akonadi to lock up. I cannot say whether the problem would have resolved if, after rebuilding the akonadi fileset, I had re-linked to my existing mail store or created a new one from the pimsettingsexporter file - the bad messages would have still been there. Nor is there any way I could find that informs the user what makes a message "bad" in this sense. As far as all the "performance schema" errors thrown by mysql, those are all red herrings and should not even be in the error file; they are near certainly bogus and should be ignored. (Side point: running akonadictl start in the terminal is informative and shows the database tables being checked; these error messages are unrelated.) Hopefully some of this information is useful. Thank much to those who replied with suggested solutions. --dg -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] ssh problems
by Wolfgang Mueller 29 Apr '16

29 Apr '16

Hi All, I have installed openSuSE 13.2 on a new computer. Even though I can reach any of the three old computers of my home network, my new computer is unreachable from outside. On the new computer, I have activated and started sshd using the Services Manager in YaST. Now, when I look for ssh with "ps ax | grep ssh | grep -v grep", the following lines appear: 1369 ? Ss 0:00 /usr/sbin/sshd -D 1602 ? S 0:00 /usr/bin/dbus-launch --sh-syntax --exit-with-session /usr/bin/ssh-agent /usr/bin/gpg-agent --sh --daemon --keep-display --write-env-file /home/wolfgang/.gnupg/agent.info-asus:0 /etc/X11/xinit/xinitrc 1604 ? Ss 0:00 /usr/bin/ssh-agent /usr/bin/gpg-agent --sh --daemon --keep-display --write-env-file /home/wolfgang/.gnupg/agent.info-asus:0 /etc/X11/xinit/xinitrc ["asus" is my new computer's name] How can I force my new computer to accept ssh from outside? Any help is welcome. Thanks in advance, Wolfgang -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 10

[opensuse] Kernel update - no reboot???
by James Knott 29 Apr '16

29 Apr '16

My openSUSE systems just received a kernel update. Normally that requires a reboot, but not this time. Why not? I'm running openSUSE 13.1. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 5

[opensuse] video editor
by Xen 29 Apr '16

29 Apr '16

Do you people know of a video editor that actually works? I have been trying for the past few hours to do a task no more complex than cutting out a little piece of a youtube video, and I have failed thus far. Or rather, the tools have failed me once more. Kdenlive immediately freezes when I try to play the video. I had a frozen application within 1 minute of starting it. Openshot (a gnome app) crashes a lot and eventually I learned how to reduce the video to a smaller part, using "visual" tools - no real cutting here yet. Not only do the text lables have no contrast in KDE (hard to see what's what) also when I did finally export the video, the final few frames were cut off, so my video was now suddenly mangled, reducing it and leaving out the end of the audio (and the video too). Meanwhile of course no one responds in Openshots irc # and when I ask in #kubuntu (which I am using right now) people just direct me elsewhere as they usually do. Do you have any favourite tool that actually works or will I need to install wine just to use Gordian Knot? (No matter how awful?). Regards, Xen. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 15

Re: [opensuse] Re: ssh problems SOLVED: Thank you
by Vojtěch Zeisek 29 Apr '16

29 Apr '16

Dne čtvrtek 28. dubna 2016 10:32:13 CEST jste napsal(a): > Dne čtvrtek 28. dubna 2016 10:05:23 GMT, Vojtěch Zeisek napsal: > > Dne čtvrtek 28. dubna 2016 10:02:14 CEST, Wolfgang Mueller napsal(a): > >> [...] it was the SuSE firewall that caused the problems. > >> Having stopped and disabled it, everything works o.k. > > > > Ehm, I'd rather recommend to open SSH port and start firewall again... > > Isn't it sufficient to rely on the firewall of my router (AVM > FRITZ!Box 3270)? I don't know this model, but I have always found cheap home routers too unreliable. If You are *sure* it is good model with good firewall, then OK... -- Vojtěch Zeisek Komunita openSUSE GNU/Linuxu Community of the openSUSE GNU/Linux https://www.opensuse.org/ https://trapa.cz/

5 5

RE: [opensuse] KMail5 Dependencies
by stakanov＠freenet.de 29 Apr '16

29 Apr '16

> -----Ursprüngliche Nachricht----- > Von: sdm > Gesendet: Do. 28.04.2016 09:55 > An: opensuse(a)opensuse.org > Betreff: [opensuse] KMail5 Dependencies > > I was curious about trying KMail5, but it needs a whole ton of hard > dependencies to even install. PIM libraries, Akonadi, and on and on. > When I install Thunderbird, it needs 0 dependencies. It doesn't even try > to install 1 extra dependency. The last time I saw developers and > package maintainers discussing Akondai, the gist I got from what they > were saying was that it's pure crap and just a total mess that needs to > be trashed. So, my question is, what does KMail5 need so many > dependencies? It just looks like a ton of bloat; I don't want Akonadi or > PIM or any of that stuff. All I would want is an email client and that's > it. > > -----Ursprüngliche Nachricht Ende----- Well you have plenty. If you choose the Kontact/Kmail solution you get an integrated package. I would be curious when you did "talk to developers" because you info is opposed to mine. For what I know: Either kmail / kontact as well as akonadi is under development. Kmail has integration with kleopatra and that is also developed on, to guarantee smartcard support (I had this info just today). Akonadi afaik is in the very moment partially rewritten to achieve higher speed and less system load. By itself it is normal that Kmail draws in a lot of dependencies because is has a lot of functions (that you probably do not use). Therefore for you there is T-bird, Claws, Evolution (although that will have a lot of gtk dependencies) and so many others. So this is not really "it is pure crap". There have been (so I have been told) problems and bugs that are "by design error" (concerning especially annoying things like the "filter amnesia" and some others), and these are addressed by the rewriting. Once you search for a specific mail or attachment, I can guarantee you, if your mail is about 5 to 6 years of messages, it is very nice (as done by me just two days ago) to find the mail in question in about 20 seconds or less, just by querying the database. So..... I do not really subscribe to "pure crap". YMMV. P.s. T-bird does not install dependency because it was originally designed to be a stand alone product. Independent but also not collaborative with the respective desktop or O.S.. Thus...what "dependency" should a totally independent third party product bring in? Anyway, what would be the issues of the dependencies? Running your KDE on a very small tablet device w/o disk space? Because if not, this will not bother you to try. Anyway if you do not like it, you can stop akonadi and you will have thereafter no system load. Sure the first run of indexation of baloo / database will take about one day in my experience. If you set up at night and give the machine the whole night to work in standby you will be done without really noticing. Don't forget to setup spamassassin (you have to install the packages independently, they are not dependency) if you want a good spam filter with pop. --- Mail & Cloud Made in Germany mit 3 GB Speicher! https://email.freenet.de/mail/Uebersicht?epid=e9900000450 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 9

[opensuse] swapoff takes 7 minutes
by Bjoern Voigt 28 Apr '16

28 Apr '16

I wonder why "swapoff -a" takes so long (7:44 minutes). There is enough free RAM space (after resuming from hibernate). I currently have two swap partitions, one on a WD red hard disk and one on a SSD. But even before (only SSD swap space) the swapoff time was nearly the same. mybox:~ # iotop mybox:~ # free total used free shared buff/cache available. Mem: 8104720 3435540 3510580 15192 1158600 4492152 Swap: 38281208 3277124 35004084 mybox:~ # time swapoff -a real 7m44.407s user 0m0.000s sys 4m37.312s mybox:~ # # grep swap /etc/fstab UUID=7c287338-bb71-41e1-a5cf-789f6fea25d3 swap swap pri=1 0 0 UUID=93313bb7-d7cd-4978-9882-079d4a803b72 swap swap pri=2 0 0 My setup: - CPU: Intel Core i5 CPU 750 @ 2.8GHz - openSUSE Tumbleweed x86_64 - 8 GB RAM - SWAP: 20 GB on SSD, 16 GB on WD red hard disk, no SWAP encryption I doubt, that the long swapoff time is not only a theoretical problem. I have several phenomenons which can be related: * System feels sluggish after resuming from hibernate. This problem became stronger after removing 8 GB RAM from 16 GB before. With "iotop" I found, that there is much I/O SWAPIN traffic. * Shutdown can take some minutes * Even with much less used SWAP memory swapoff takes too long Any ideas? What is a reasonable time for swapoff? Greetings, Björn -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 52

Re: [opensuse] KMail5 Dependencies
by stakanov＠freenet.de 28 Apr '16

28 Apr '16

> -----Ursprüngliche Nachricht----- > Von: Xen > Gesendet: Do. 28.04.2016 12:52 > An: oS-en , > Betreff: Re: [opensuse] KMail5 Dependencies *****SNIP******. > > The whole point is really I think that Akonadi does not equal KDE. > > You can use KDE just fine without it. No user of KDE should be forced to > use that ****of crap*. > I understand your point. But you are not forced to use it. "akonatictl off" Done. You say: I want an email client that runs without akonadi. Then use TB. You say I want a standalone local email client that does not have a database and is stable. Well, who tells you that stable is also save these days with what the userspace offers. Obligations: Why do I have to install SAMBA if I have Wine installed. Why do I have always to blacklist avahi if I do not use it at all. The life is full of why. But samba you can uninstall but some libraries. And AVAHI you can blacklist it. And Akonadi? Well you CAN switch it off. Of course then you will not opt for software that REQUIRES it. This would be like buying an AUDI T8 instead of a Tesla and complain that it requires gasoline. You want electrical you buy Tesla. You want gas you buy Audi (or whatever). YOU choose, you are not forced. Of course your choice MAY influence the producer. But MAY is not MUST and your position MAY not be the one of the MAYORITY. Please note that the caps are intended as cursive not as "scream". Just for the netiquette. I do not know how to do cursive in plaintext as convention You may educate me if you do. So no aggressive intention. If ever you think that your position has people behind, ask to the KDE team to develop this or put together a team of pro's and enthusiasts for the new and wicked KDXENMAIL. :-) > I don't want to be married to a platform that is KDE only, that is going > to store all of my personal data and emails in a faulty database that runs > somewhere in /var/lib or whatever, or even in some user home directory > subfolder that I don't know about. So you choose a distribution without systemd, without akonadi, without zeroconf....how many users have really the power to control what is going on. How many are able to really understand permissions, apparmour, tomoyo, leave aside SLE settings. Did you try to understand the setting of PAM? I did. It is a DESPAIR. You may set somewhere DON'T do this. And there is written: depending on PAM settings this may be overwritten. And where do you find these PAM settings? And how many user know how to administer the system to that point?? > > A system that is not stable and not solid, not dependable and not > resilient. And in no way failsafe. Without polemic: so do not use software. To my knowledge there is currently nothing out there that resembles to what you claim. All software seems in constant flow, all with regressions and bugs. > I have always stayed away from "full solutions" that were not to my liking > and it is one imortant reason I have never started using a Mac (other than > the cost). Thunderbird is simple, a single package, easy to understand, > stores it where you know it is, only weird thing is the naming of its > profiles. Acknowledged. So if Thunderbird is what you like and need. Where is the problem? Want KDE rocksolid without all modern things. Take Trinity. Want a Desktop that does not make you worry about the word choice and settings: take Gnome. Want to feel in "social company of the masses": Take MIR. So nobody forces your choice. But consider: if I want to buy a new laptop without paying the F***Kn "Marketleader" and without pre-installed "let us shoot you in the knee" software, i am quite forced. > > (If you look at Netscape mail directories you will find it uses the exact > same format as today's Thunderbird :p. If you look at many devices they still use the very bad DOS FAT32 that was used so many years ago. :-o Now...is that an advantage? Not sure. NTFS: years old but...fast? Again YOU choose. > > So for me once more, nothing much has improved in 10 years at least, much > has regressed, and I'm happy to use IMAP but I find it hard to back up > (remotely). In a perfect world you use IMAP. Without all the bad guys out there. I do like my mail on my PC. That also is a choice. After all it seems we are quite "free to choose" with Linux, are we. And I have here a 12 year old PC (first generation 64 Bit Athlon Single core 939 Socket (for the young ones: look up in Wikipedia what was that socket Hint: the mainboard features a AGP/PCI-e hybrid slot. And yes, it runs well with Leap and TW still today. Bit slow but it does. Try this with other software! :-) Well for me things are not so dramatic. Regards --- Mail & Cloud Made in Germany mit 3 GB Speicher! https://email.freenet.de/mail/Uebersicht?epid=e9900000450 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

Re: [opensuse] HP Ultrium LTO Compression
by Paul Groves 28 Apr '16

28 Apr '16

Yes I am using LTO3 with LTO media tape is a HP C7973A Drive is a HP storageworks Ultrium 920 But this issue is the same with my lto2 and lto1 drive. I checked the tapes at work and they hold the correct amount of data when written with Backup Exec. so it must be a configuration issue. The performance is fine, if anything it is faster to write the tapes using tar than backup exec, it is just not compressing and I have no idea how to turn this on. (Although mt and mtst say it is already on). Is the tape density a good place to be looking? As far as I can tell it is indicating no compression. 0x44 on mty lto3 drive 0x42 on ltot and 0x40 on lto1 On 28 April 2016 at 17:08, Greg Freemyer <greg.freemyer(a)gmail.com> wrote: > > On Thu, Apr 28, 2016 at 12:02 PM, Paul Groves <paul.groves.787(a)gmail.com> > wrote: >> >> I am using an LTO3 tape which is 400GB native (up to 800GB) so I would >> expect somewhere between these values. >> The directory contains many un-compressed media files so should be >> compressible, and it is only 368GB in size. >> It stops at around about 250-300GB mark by my estimation, which was my >> original problem. It isn;t even using anywhere near it's native size. > > > Paul, > > Ar you sure you are using both LTO-3 drives and LTO-3 media? > > If so, I have no idea why the tapes would not hold at least the 400GB of > data. > > Greg > > -- > Greg Freemyer > www.IntelligentAvatar.net -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0