September 2015 - openSUSE Users - openSUSE Mailing Lists

Sorry SuSE: 9.1 is Waste of time and money!
by Terje J. Hanssen 17 May '24

17 May '24

I am sorry to conclude that my upgrade from SuSE 9.0 Pro to 9.1 Pro has been waste of time and money for me, so far. The same I have to say about the free SuSE "Installation support". The reason is that my SuSE 9.1 installation only detects 1 of my 3 SCSCI devices (as I wrote in another subject on this forum: http://lists.suse.com/archive/suse-linux-e/2004-May/3254.html) Yamaha 4416S CDRW recorder detected HP DVD Writer 100i NOT detected Epson 1640SU scanner NOT detected It's rather stupid. I have installed 9.1 using the DVD disk just in the HP DVD drive, but after the installation of 9.1, the KDE/Konqueror /media/recorder cannot access it and YaST2 cannot install additional software from it. Only one "Cdrecorder" is found in My computer and that is the Yamaha 4416 drive, which the KDE/Konqueror file manager assign as /media/recorder11. I am sure 9.1 is the reason, as I hadn't this problems with 9.0. I have tried both an update and two several new installation of 9.1. Neither SJDS nor Windows on the same multiboot PC have problems to detect these devices. In my opinion SuSE should therefore debug 9.1 better and longer, and not leave the problems to the customers. I see SuSE notes on their web saying that they know SCSI scanners are not detected in 9.1. But regarding my HP DVD writer problem, the SuSE support (as usual) don't take the responsibility and argue that this problem (a combination of IDE disk and SCSI devices) isn't included in their free installation support! This sounds remarkable, and I have never had a modern PC of so simple model or configuration that it has fitted the limited rules for the free installation support. Terje J. Hanssen

17 29

[opensuse] Project management software question for project managers
by Ted Byers 15 Apr '24

15 Apr '24

I am looking for project management software I can install on my Suse box. Alas, there are quite a number of prducts that claim to be suitable project management products, but I am hoping to obtain a little help separating the wheat from the chaffe. Basically, when I open the project management software, I want to be able to choose from among a number of projects that are under way, and then see the relation between a client's wish list and the functional requirements specs, and then how these specs relate to the UML diagrams that have been created, and from there, what tasks have been defined for each requirement and the identity of all persons involved, the developers and their managers, and the person who designed the code that supports the requirement. And with that, I want to be able to see the project's timeline, the related bugs, &c. I would even want to be able to open the source code files and examine the code that was actually written. Here is my wish list: 1) a web application that stores data in either PostgreSQL or MySQL. 2) easy integration with UML tool (or has it's own UML tool that supports round trip engineering) 3) resource management (e.g. computers, and development tools, that can be used, personelle assigned to each task) 4) documentation of relation between functional requirements specs to specific tasks and specific unit and integration tests. 5) time/effort tracking 6) bug tracking, including data relating the existance of the bug, and effort required to fix it, to the person who wrote the original code, the person who supervised him or her, and the person who designed the 'feature' in question, the time taken to complete the original task, and the technologies used (to imprrove accountability as well as to determine retraining and continuing education needs (people aren't disposable, so instead of taking a harsh aproach to problems identified, I prefer to use education as a corrective, but I can't design corrective instruction without knowing precisely what the need is). I also need to know if a developer has a higher than normal bug rate simply because he doesn't take enough time to ensure the job is done right, or because I haven't adequately trained him, or because of a poor choice of tools, or somethng else that may be my fault. 7) use of task effort tracking history to generate provisional effort/cost estimates from new project's functional requirements 8) easy integration with open source ERP products like OFBiz (which may make trakcing resources and manpower easier, as well as connect real production data to the enterprise's accounting systems) 9) easy integration with CMS products, like Wordpress (especally for production documentation, includng degin documentation and user guides and reference manuals) 10) easy integration with verion control systems such as subversion. If there is a decent product that supports all of this, great (and language used to implement it doesn't matter), but if I have to write code to add missing requirements, then I am limited to those implemented using Perl or Java (and running on Tomcat). I don't know PHP well enough, and I don't know Ruby at all; and I really don't want to think about implementing this sort of thing in C++ (though I could if absolutely necessary). If you have project management experience, and use tools that are available for Suse Linux, what software product(s) did you use, and with what result? While I await relies, I will continue to review web documentation for those products I have found so far, to see if any of them are a) suitable for use in production and b) to see to what extent they support the features I am after. I have seen a number of products so far in my search, that deserve to be nameless, because they provide no way to relate cost estimates to one's team's track record, or to the details of the design, and seem satisfied with production of a pretty gantt chart (which is why I have formed the view that there is a whole lots of chaffe in the set of applications that call themselves project menement software - I have yet to find anything that really has the potential of being labelled wheat). Thanks Ted -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 4

[SLE] RealPlayer G2 on SuSe 6.2
by yh＠ottawa.com 03 Apr '24

03 Apr '24

Yesterday, I finally got sound going on my Linux setup. I downloaded RealPlayer G2 and it worked beautifully. Today, RealPlayer run but no sound coming out. All other sound functions still work. I can still play my CD, have system sound BUT no sound when I run RealPlayer. /var/log/message said kernel: Sound: DMA (output) timed out - IRQ/DRQ config error? but KDE sound still work. I have re-installed RealPlayer 3 times now, still no sound when I run the RealPlayer. Any help is appreciated. Ying yh(a)ottawa.com -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 2

Creating a new user for a deamon
by Rowan Reid 15 Jan '24

15 Jan '24

I'm setting up a cron job for a analysis tool, I'm trying to use the SuSE tools where possible but YAST doent' allow you to create new user without a home I tried /dev/null is there a proper way to do this ? Rowan Reid Job Captain, Systems Administrator STUDIO 3 ARCHITECTS 909 982 1717

3 2

Web Site Standards
by Bryan Tyson 25 Sep '21

25 Sep '21

On Wednesday 03 July 2002 03:38, Michael wrote: > I tried to visit this site. > http://www.bet365.com > The result upset me so much i sent them this. I sent the letter below, and I encourage everyone on the list to send a similar letter. ----------------------------------------- Subject: Create a Real Web Site Please From: Bryan S. Tyson <bryantyson(a)earthlink.net> To: webmaster(a)bet365.com When attempting to view your site using Konqueror 2.2.1 and Mozilla 0.9.4, both Linux web browsers, I was curtly informed that my browser is "incompatible." Your site, sir, is what is "incompatible." Stick with established standards and real html, not Microsoft proprietary "features." *************************************************** Powered by SuSE Linux 7.3 Professional KDE 2.2.1 KMail 1.3.1 This is a Microsoft-free computer Bryan S. Tyson bryantyson(a)earthlink.net ***************************************************

10 9

Mount Windows NT(NTFS) drive as drive Z: for all users
by Keith Jacobs 25 Sep '21

25 Sep '21

We have an winNT server and need to auto mount a shared folder as if it were a windose mapped drive Z: on SuSE8 Could someone please explain how to do this and how to make sure it is set-up for every user everytime the system is booted. Thanks Regards Keith Jacobs New to Linux

3 2

[opensuse] oS 13.1 : "gnome keyring socket is not owned with the same credentials as the user"
by ellanios82 11 Aug '19

11 Aug '19

Hello List am using Xfce : - in /var/log/warn : i see warning " The gnome keyring socket is not owned with the same credentials as the user login: /run/user/1000/keyring-4i77r7/control 2013-11-27T13:27:17.434100+02:00 su: gkr-pam: couldn't unlock the login keyring " ............... - any ideas how to fix ? thanks -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] [openSUSE] autoyast
by Chuck Payne 24 Sep '16

24 Sep '16

Hey, I have install fest come up and I was wanting to know if this still work with 13.2, or is there an update doc. http://users.suse.com/~ug/autoyast_doc/index.html Thanks, -- Terror PUP a.k.a Chuck "PUP" Payne ----------------------------------------- Discover it! Enjoy it! Share it! openSUSE Linux. ----------------------------------------- openSUSE -- Terrorpup openSUSE Ambassador/openSUSE Member skype,twiiter,identica,friendfeed -- terrorpup freenode(irc) --terrorpup/lupinstein Register Linux Userid: 155363 Have you tried SUSE Studio? Need to create a Live CD, an app you want to package and distribute , or create your own linux distro. Give SUSE Studio a try. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

Adding fonts?
by Tracer Bullet 22 Aug '16

22 Aug '16

Hi all, Reading some mails on the GIMP mail list, I ran across the procedure to install some more fonts for not only Gimp, but the system and StarOffice to use also. Well, I installed the fonts, went to the shell and issued the command xset fp+ <font directory> and then the rehash command and all fonts are there! Ok, that went well, but each time I restart the system, I have to do it all over again? Is there a way to make it permanent and read the new fonts like it does the ones the system installs or is that a no-no? end of line Tracer Shell commands: xset fp+ <new font directory> xset fp rehash -- ---KMail 1.2--- SuSE Linux v7.2--- Registered Linux User #225206 /tracerb(a)sprintmail.com/ *Magic Page Products* *Team Amiga* http://home.sprintmail.com/~tracerb

3 2

[opensuse] Does 13.2+ work with shorewall properly yet? Read about wicked/systemd woes
by cagsm 06 Jun '16

06 Jun '16

Good day, I am trying to find out of shorewall is supposed to work with 13.2 properly, as I read about systemd stuff being in the midst of creation and wicked and sort of that things that make it problematic to run something different from susefirewall2. Thanks for helping. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 20

[opensuse] I can not filter out some systemd messages in syslog
by Carlos E. R. 17 May '16

17 May '16

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I have this in "/etc/rsyslog.conf": if ($programname == 'named' or $syslogtag == '[named]:') \ then -/var/log/named & stop ... if ($msg contains 'Started Session' and $msg contains 'of user') \ then -/var/log/systemdpurged & stop # # the rest in one file # *.*;mail.none;news.none -/var/log/messages I get the expected entries in "/var/log/systemdpurged": <3.6> 2014-03-01 16:30:01 Telcontar systemd 1 - - Started Session 93 of user cer. <3.6> 2014-03-01 16:33:01 Telcontar systemd 1 - - Started Session 94 of user news. But I'm also getting them in "/var/log/messages": <3.6> 2014-03-01 16:30:01 Telcontar systemd 1 - - Starting Session 93 of user cer. <3.6> 2014-03-01 16:33:01 Telcontar systemd 1 - - Starting Session 94 of user news. And they should not be there. So the "stop" line for those systemd entries is not acting. However, it works for other sections, like the "named" section shown above, and others I do not show for clarity. Are systemd entries special? - -- Cheers Carlos E. R. (from 13.1 x86_64 "Bottle" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEYEARECAAYFAlMSADcACgkQtTMYHG2NR9WCgwCdEgnb+Apy47tcjI31Dv5brA9X +TMAoIt87JaGgMoP5Zf11OZM0XevIjif =uI81 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Namebench
by Steven Hess 25 Dec '15

25 Dec '15

There was a previews thread where namebench was mentioned. I thought it was the optimizing resolv.conf thread. Anyway this is a different issue. Id like to run it. The ones I located in OBS were not functional here. What could I do to try another source? Thanks Steven -- ____________ Apply appropriate technology. Use what works without prejudice. Steven L Hess ARS KC6KGE DM05gd22 Owner Flex-1500 and Flex-3000, FT-857D, FT-817ND, FT-450 openSUSE Linux 12.3 KDE Known as FlameBait and The Sock Puppet of Doom. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 5

[opensuse] Spreadsheet : Paste-Special
by ellanios82 14 Nov '15

14 Nov '15

Hello List , - in case of interest : Paste-Special , from webpage Number , into Spreadsheet of LibreOffice : Version: 5.0.0.5 does not work : Edit ---> Paste-Special is not selectable , and remains greyed-out ............. regards ellan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] Browser too old for new openSUSE site.
by Roger Oberholtzer 09 Nov '15

09 Nov '15

I know that openSUSE 12.3 is not supported, but I tried to open the following link in Firefox 34.0.5 on that platform and it said: Your browser is not compatible with Google Maps v3. https://en.opensuse.org/openSUSE:Map -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 12

[opensuse] Where can I get genIS_PLAINcache
by Chuck Payne 09 Nov '15

09 Nov '15

Hi, I am trying to set up a simple repo, I read on the opensuse site about a binary called genIS_PLAINcache, because I can't see to find it or the package yast2-packmanager either. Can someone help. I am setting this repo up for SLE9, I have tried to use createrepo but I keeping getting errors. -- ---------------------------------------- When a place gets crowded enough to require ID's, social collapse is not far away. It is time to go elsewhere. The best thing about space travel is that it made it possible to go elsewhere. -- Robert Heinlein -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 4

[opensuse] lvm boot fails with timeout in multipath
by auxsvr 08 Nov '15

08 Nov '15

Boot with LVM root often fails on oS 13.2, and dracut starts the emergency shell. The messages beforehand are (copied with errors): timeout /sbin/multipath -i -u sda1 [slow multipath etc] dracut -initqueue PARTIAL MODE Incomplete logical volumes will be processed [another error message about a missing LVM partition] This issue looks similar to the one described in this[1] Ubuntu bug report. Has anyone else seen this? -------- [1] https://bugs.launchpad.net/ubuntu/+source/multipath-tools/+bug/1431650 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 18

[opensuse] Hello
by Lutchy Horace (Mailing List) 02 Nov '15

02 Nov '15

Testing if I can post. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] Syncing photographs with shotwell on two computers
by Carlos E. R. 29 Oct '15

29 Oct '15

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I use shotwell to get the photos from my cameras; and I sync them on two computers (laptop and desktop), using unison. Shotwell is configured to store tags and tittles in the photos; however, what I do in one computer doesn't show on the other computer, as if it were done in a database instead. That is, the photos are transferred, but not the tags and other modifications to the metadata. Am I doing it wrong, is there a solution? - -- Cheers Carlos E. R. (from 13.1 x86_64 "Bottle" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEYEARECAAYFAlXzWrUACgkQtTMYHG2NR9XOfQCfXowL0/45n7yiMjEqkfWq0mAm CpcAnilrEa2h8jB+J3FeDBUExr/XClKC =pUtH -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 30

[opensuse] Gwenview displaying .raw
by andredo＠wxs.nl 15 Oct '15

15 Oct '15

How can I prevent Gwenview to display .raw foto's, as I could in earlier versions? André den Oudsten -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 6

[opensuse] KGPG show invalid fingerprints
by Bjoern Voigt 05 Oct '15

05 Oct '15

I found an interesting KGPG problem. Could someone confirm this? I use KPG version 2.14.1 (openSUSE 13.2 default): > kgpg --version Qt: 4.8.6 KDE: 4.14.9 KGpg: 2.14.1 > cat /etc/os-release NAME=openSUSE VERSION="13.2 (Harlequin)" VERSION_ID="13.2" PRETTY_NAME="openSUSE 13.2 (Harlequin) (x86_64)" The fingerprint of security(a)suse.de in gpg2: > gpg2 --edit-key 58FC58B1317CD502 gpg (GnuPG) 2.0.26; Copyright (C) 2013 Free Software Foundation, Inc. This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. gpg: enabled debug flags: memstat pub 4096R/0x58FC58B1317CD502 created: 2014-10-02 expires: never usage: SC trust: marginal validity: full sub 4096R/0x457446950DE80E03 created: 2014-10-02 expires: never usage: E [ full ] (1). SUSE Security Team <security(a)suse.de> gpg> fpr pub 4096R/0x58FC58B1317CD502 2014-10-02 SUSE Security Team <security(a)suse.de> Primary key fingerprint: E502 243D F6B7 E939 EA1B 4A0E 58FC 58B1 317C D502 The same fingerprint in KGPG: Key properties: SUSE Security Team <security(a)suse.de> Key ID: 58FC58B1317CD502 Comment: none Creation: 02.10.2014 Expiration: Unlimited Trust: Full Owner trust: Marginally Algorithm: RSA/RSA Length: 4096/4096 Capabilities Signature, Encryption, Certification Fingerprint C2FE 18E6 D4A7 021A 787C B734 4574 4695 0DE8 0E03 Greetings, Björn -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] adobe flash player crashes in browser
by Istvan Gabor 04 Oct '15

04 Oct '15

Hello: I've been using adobe flash player in firefox browser to listen to live radio stream and it practically never crashed. Recently I've changed my mobo and processor with built in intel graphics. Previously I had standalone nvidia graphics card and used nvidia proprietary driver with nomodeset option in grub. With the new hardware I use (I guess) nouveau driver and I removed nomodeset option from grub. I haven't changed the operating system or browser of flash player. Now flash player crashes about ~30-40 minutes. I don't know if this is related to new graphics, only coincidence, or caused by something else. How can I check and fix it? The system is openSUSE 12.2 (I know it's old) with KDE3.5 and firefox esr24, and flash plugin 11.2.202.442. Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 6

[opensuse] Why is Leap x86_64 only?
by David C. Rankin 04 Oct '15

04 Oct '15

All, Why is Leap x86_64 only? What is the technical reason openSuSE cannot build i586 packages as well. I would expect to see the "We don't want you anymore" kiss-off to i586 from the bleeding edge distros well before openSuSE. Arch (the bleeding edge) still packages i686 on the 4.2 kernel, so it isn't a "can't be done issue". Why now? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 17

[opensuse] Developing Leap 42.1 Info
by Douglas DeMaio 01 Oct '15

01 Oct '15

The release date for Leap 42.1 is approaching and to make this release is as successful as the last, we could sure use your help. There are several things we can do as a community to improve awareness of Leap both inside and outside of the Free and Open Source Software community. I kindly ask everyone involved with the openSUSE project to update the wiki in preparation for the release at https://en.opensuse.org/Portal:42.1. Our last release, 13.2, was very successful and it would be great if we can replicate that effort by updating the information for 42.1, so it looks similar to https://en.opensuse.org/Portal:13.2 Developers, packages maintainers and anyone else knowledgeable about what has changed in the new versions could add information to https://en.opensuse.org/openSUSE:Major_features42.1, which we can use to replace https://en.opensuse.org/Features on the day of the release. Screenshots are also important and anyone can do it! Just help replace the 13.2 screenshots on https://en.opensuse.org/Portal:42.1/Screenshots/1 page with Leap 42.1 screenshots. It will replace the https://en.opensuse.org/Screenshots page on Nov. 4 with the updated screenshots. Media - Please retweet, +1 or share all info related to the release of Leap 42.1. Test the Beta, RC1 and release and express your opinion about it. Let people know what you like about it or what could improve for Leap 42.2. Submit articles to open source media outlets, write blogs and comment articles related to openSUSE. Attend FOSS and Open Source events to help others learn about openSUSE. If you want to represent openSUSE at these events, contact me and I?ll see what marketing material I can send you. Have a lot of fun! Doug -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 5

[opensuse] 13.1 - error: rpmdbNextIterator: skipping h# 3822 Header V3 RSA/SHA256 Signature, key ID 3dbdc284: BAD
by David C. Rankin 29 Sep '15

29 Sep '15

The subject says it all: For example, rpm -qa | grep whatever, works fine, but throws the error related to #3822 Header: error: rpmdbNextIterator: skipping h# 3822 Header V3 RSA/SHA256 Signature, key ID 3dbdc284: BAD 17:20 alchemy:~> rpm -q --querybynumber 3822 error: rpmdbNextIterator: skipping h# 3822 Header V3 RSA/SHA256 Signature, key ID 3dbdc284: BAD error: rpmdbNextIterator: skipping h# 3822 Header V3 RSA/SHA256 Signature, key ID 3dbdc284: BAD error: rpmdbNextIterator: skipping h# 3822 Header V3 RSA/SHA256 Signature, key ID 3dbdc284: BAD <stuck in loop forever> 22:44 alchemy:~> rpm -qi --querybynumber 3823 Name : kdemultimedia3-jukebox Version : 3.5.10.1 Release : 49.7 Architecture: x86_64 Install Date: Tue 15 Sep 2015 01:06:40 AM CDT 22:44 alchemy:~> rpm -qi --querybynumber 3821 Name : util-linux Version : 2.23.2 Release : 31.1 Architecture: x86_64 Install Date: Sun 19 Jul 2015 01:31:21 PM CDT Group : System/Base Size : 3218862 License : GPL-2.0+ Hmm, how to fix? # rpmdb --rebuildb (didnt' work) # rpm -qi --querybynumber 3822 error: rpmdbNextIterator: skipping h# 3822 Header V3 RSA/SHA256 Signature, key ID 3dbdc284: BAD error: rpmdbNextIterator: skipping h# 3822 Header V3 RSA/SHA256 Signature, key ID 3dbdc284: BAD error: rpmdbNextIterator: skipping h# 3822 Header V3 RSA/SHA256 Signature, key ID 3dbdc284: BAD <snip continual loop> # rpm -Uvh --replacefiles --replacepkgs \ /var/cache/zypp/packages/kde3/x86_64/kdemultimedia3-jukebox-3.5.10.1-49.7.x86_64.rpm That didn't work, either... # rpm -Uvh --oldpackage \ /var/cache/zypp/packages/download.opensuse.org-update/x86_64/util-linux-2.23.2-16.1.x86_64.rpm <snip> # rpm -Uvh \ /var/cache/zypp/packages/download.opensuse.org-update/x86_64/util-linux-2.23.2-31.1.x86_64.rpm Preparing... ################################# [100%] Updating / installing... 1:util-linux-2.23.2-31.1 ################################# [ 50%] setting /usr/bin/wall to root:tty 2755. (wrong permissions 0755) setting /usr/bin/write to root:tty 2755. (wrong permissions 0755) setting /usr/bin/eject to root:audio 4755. (wrong permissions 4750) Cleaning up / removing... 2:util-linux-2.23.2-16.1 ################################# [100%] That didn't work, either... # rpmdb --rebuilddb error: rpmdbNextIterator: skipping h# 3822 Header SHA1 digest: BAD Expected(183996560b9f1b18475f66d3d5c3d7f496f4112d) != (febd610bb8d39c1a315562f61c122c74f99faf2d) Ahh... Fixed! Question -- Why wasn't this problem solved with the first 'rpmdb --rebuilddb'? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

12 104

[opensuse] zypper and yast update issues on 13.1
by Roger Oberholtzer 29 Sep '15

29 Sep '15

A day or so ago it seemed lots of certificates on openSUSE, as well as packman, needed to be updated. I allowed this. But after doing so I cannot install anything from anywhere. I get messages like the following: Error: Subprocess failed. Error: RPM failed: warning: /var/cache/zypp/packages/repo-oss/suse/i586/filesystem-13.1-3.1.2.i586.rpm: Header V3 RSA/SHA256 Signature, key ID 3dbdc284: NOKEY I did a 'zypper clean -a', and then once again allowed the certificates to be used. But the problem persists. Since I have not seen anyone else with this problem, I am guessing something on my system is messed up. But I am not sure what, nor am I sure how to fix it. I thought I might try something like zypper --no-gpg-checks in mypackage, but the message persisted. I am perhaps barking up the wrong tree. Any ideas? -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 32