November 2014 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Automount of USB devices stopped working
by Vojtěch Zeisek 02 Dec '14

02 Dec '14

Hello, after upgrade from 13.1 to 13.2 automounting of USB disks in KDE stopped working. Manual mounting works. KDE sometimes shows prompt for root password. It then allows to mount the disk within KDE. Unmounting then doesn't require root password. Autofs is running (and I haven't touched config files), although „systemctl status autofs.service“ says: „automount[22123]: lookup_init:139: lookup(yp): map auto.master: Local domain name not set“. I don't know how relevant this is for the problem. In KDE Config Centre | Removable devices I have for all devices checked automounting. But it doesn't have any effect... Dmesg shows: [39222.693189] usb 3-3: new high-speed USB device number 16 using xhci_hcd [39222.859722] usb 3-3: New USB device found, idVendor=0951, idProduct=1625 [39222.859729] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [39222.859732] usb 3-3: Product: DT 101 II [39222.859735] usb 3-3: Manufacturer: Kingston [39222.859737] usb 3-3: SerialNumber: 001372982D3DA9C096330076 [39222.860367] usb-storage 3-3:1.0: USB Mass Storage device detected [39222.860734] scsi18 : usb-storage 3-3:1.0 [39223.863680] scsi 18:0:0:0: Direct-Access Kingston DT 101 II 1.00 PQ: 0 ANSI: 2 [39223.864060] sd 18:0:0:0: Attached scsi generic sg3 type 0 [39223.864444] sd 18:0:0:0: [sdc] 31277056 512-byte logical blocks: (16.0 GB/14.9 GiB) [39223.864813] sd 18:0:0:0: [sdc] Write Protect is off [39223.864821] sd 18:0:0:0: [sdc] Mode Sense: 23 00 00 00 [39223.865160] sd 18:0:0:0: [sdc] No Caching mode page found [39223.865165] sd 18:0:0:0: [sdc] Assuming drive cache: write through [39223.966081] sdc: sdc1 [39223.967376] sd 18:0:0:0: [sdc] Attached SCSI removable disk [39235.643843] usb 3-3: USB disconnect, device number 16 [39243.309729] usb 3-3: new high-speed USB device number 17 using xhci_hcd [39243.474636] usb 3-3: New USB device found, idVendor=125f, idProduct=a93a [39243.474644] usb 3-3: New USB device strings: Mfr=1, Product=3, SerialNumber=2 [39243.474647] usb 3-3: Product: Portable HDD SH93 [39243.474650] usb 3-3: Manufacturer: ADATA [39243.474653] usb 3-3: SerialNumber: SH0190810190 [39243.475207] usb-storage 3-3:1.0: USB Mass Storage device detected [39243.476273] scsi19 : usb-storage 3-3:1.0 [39244.479114] scsi 19:0:0:0: Direct-Access ADATA HDD SH93 PQ: 0 ANSI: 0 [39244.479690] sd 19:0:0:0: Attached scsi generic sg3 type 0 [39244.479695] sd 19:0:0:0: Embedded Enclosure Device [39244.479745] sd 19:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [39244.480092] sd 19:0:0:0: Failed to get diagnostic page 0x8000002 [39244.480095] sd 19:0:0:0: Failed to bind enclosure -19 [39244.480251] sd 19:0:0:0: [sdc] Write Protect is off [39244.480256] sd 19:0:0:0: [sdc] Mode Sense: 03 00 00 00 [39244.480456] sd 19:0:0:0: [sdc] No Caching mode page found [39244.480464] sd 19:0:0:0: [sdc] Assuming drive cache: write through [39244.504825] sdc: sdc1 [39244.505877] sd 19:0:0:0: [sdc] Attached SCSI disk [39253.085857] usb 3-3: USB disconnect, device number 17 Any idea what went wrong? Vojtěch -- Vojtěch Zeisek Komunita openSUSE GNU/Linuxu Community of the openSUSE GNU/Linux http://www.opensuse.org/ http://trapa.cz/

5 16

[opensuse] YaST2 - System Backup for 13.2
by Vojtěch Zeisek 02 Dec '14

02 Dec '14

Hi, this made me really angry. Package yast2-backup is missing for 13.2: http://software.opensuse.org/package/yast2-backup Why? This was one of the most useful YaST modules! Is there any replacement? Thanks, V.

7 26

[opensuse] Does openSUSE store IPv6 addresses somewhere?
by James Knott 01 Dec '14

01 Dec '14

I just set up a 2nd IPv6 subnet for my guest WiFi. While my openSuSE 13.1 based router provides the correct router config via router advertisement, for some reason the "client" computer, running 12.3 keeps on sending out neighbour advertisements for the address it would have when connected to my main network. Ifconfig shows it has IPv6 addresses for both subnets, though it's only connected to one. Ip -6 route show also shows routes for both subnets. Is that info being cached somewhere, when it shouldn't be? That computer is using the KDE network manager. BTW, I have a /56 subnet, which equals 256 /64 subnets, of which I'm currently using 2. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 13

[opensuse] Is there something like Debians Mandos for Opensuse?
by mots 01 Dec '14

01 Dec '14

Hello, Debian GNU/Linux contains a program called Mandos, which lets computers with encrypted root partition boot unattended. See: https://wiki.recompile.se/wiki/Mandos Is there something similar for Opensuse? Regards, mots

4 8

[opensuse] Libreoffice base wizards not working in 13.2
by eddie 30 Nov '14

30 Nov '14

I've been trying to use the wizards in libreoffice base but when I click on the icon to activate them I get no response or error message. They just don't happen. This is the table, query, form, and report wizards none of them work. I've tried them on a machine running 13.1 and they all seem to work without any issues. LibreOffice 4.3.3.2 java-1_8_0-openjdk KDE 4.14.3 OpenSuse 13.2 kernel 3.16.6-2-desktop x86_64 Is anyone else experiencing the same? Has anyone found a workaround or fix? Thanks Eddie -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Software installer fails to install rpm package
by Marco Calistri 30 Nov '14

30 Nov '14

Very annoying problem! Whenever I try to install a new rpm (VirtualBox updates in the majority) I click on install using software installer... The software installer starts, verify dependencies then always resolves into error and package went not installed. The only way is to download the rpm then install it by hand. Ubuntu is flawless on this process! Cheers, -- Marco Calistri opensuse 13.1 (Bottle) 64 bit - 3.17.0-1.gc467423-default Gnome 3.12.2 Intel® Core™ i5-2410M CPU @ 2.30GHz × 4 - Intel® Sandybridge Mobile -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

11 55

[opensuse] Thunderbird compose anomaly
by Anton Aylward 30 Nov '14

30 Nov '14

This is with the last few revisions of Thunderbird. I'm currently using 31.2.0 Sometimes, that is more often than not, when I compose rely that is more than the small initial edit window in length, I move the cursor with the mouse or paste something in and a large amount of, usually trailing and including the signature block, text gets replaced by the word "Write". Or sometimes it gets partially replaced and prefixed by that word. Or sometimes this happens in the middle of the text. Its a sometimes. It hasn't happened in this message yet. I have no idea about the cause and once it happens in a message it keeps happening as I enter more text. Has anyone else seen anything like this or can offer a clue as to why it is happening. -- /"\ \ / ASCII Ribbon Campaign X Against HTML Mail / \ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] update removes Dolphin
by lynn 29 Nov '14

29 Nov '14

13.2 zypper dup gives: The following 4 applications are going to be REMOVED: Ark Dolphin KGpg Marble It's going to remove Dolphin. That's the file manager isn't it? L x -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 10

[opensuse] zypper dup without yast
by lynn 29 Nov '14

29 Nov '14

13.2 Hi Which file is written when I change the name of a repository url in Yast? Thanks, L x -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 5

AW: [opensuse] Is there something like Debians Mandos for Opensuse?
by mots 29 Nov '14

29 Nov '14

Hello, The password is stored in encrypted form on the mandos server. So the encrypted system can only boot unattended while it's in the same LAN segment as the mandos server. If somene steals the computer (or copies an encrypted VMs storage), then they'll have to enter the password on boot. As for porting it to openSUSE myself: I know there's been an effort to port it to CentOS, I've asked the devs if there's some documentation on what has to be changed to get it to run on a non-Debian system. if I get a reply I can try to get it to run on openSUSE. Regards, mots -----Ursprüngliche Nachricht----- > Von:Carlos E. R. <robin.listas(a)telefonica.net> > Gesendet: Sam 29 November 2014 15:03 > An: oS-en <opensuse(a)opensuse.org> > Betreff: Re: [opensuse] Is there something like Debians Mandos for Opensuse? > > On 2014-11-29 09:30, Per Jessen wrote: > > mots wrote: > > > >> Hello, > >> > >> Debian GNU/Linux contains a program called Mandos, which lets > >> computers with encrypted root partition boot unattended. See: > >> https://wiki.recompile.se/wiki/Mandos > >> > >> Is there something similar for Opensuse? > > > > If you're up to it, it looks like an excellent opportunity to > > participate. There is noone building a Mandos package for openSUSE atm. > > I don't see how an encrypted root that automatically boots can be a good > thing. If somebody steals the machine, they can "open" it completely! > > How does that Mandos does the trick, where is the password stored? > > -- > Cheers / Saludos, > > Carlos E. R. > (from 13.1 x86_64 "Bottle" at Telcontar) > >

4 7