April 2011 - openSUSE Users - openSUSE Mailing Lists

[opensuse] 3 partitions vs. 11 partitions
by Wolfgang Mueller 20 Apr '11

20 Apr '11

Yesterday I bought a new laptop and installed 11.4. As it is long ago when I installed OpenSuse last time, I followed the suggestion to create only three Linux partitions: Win7 167 GB (shrinked by the Installation CD) Swap 2 GB / 20 GB /home 260 GB (the remainder) Normally I would have created a much larger number of Linux partitions, for instance: Win7 167 GB (shrinked by the Installation CD, as above) Swap 2 GB / 10 GB /usr 20 GB /opt 10 GB /var 5 GB /tmp 5 GB /boot 0.09 GB /srv 60 GB /data 60 GB /local 60 GB /home 52 GB Does that make sense? Or is it only a waste of space, since the partitions cannot be filled completely? Thanks in advance for your suggestions. Best regards, Wolfgang -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

19 56

[opensuse] create md RAID1 from old HD's ordinary partition with data plus new virgin HD's empty 0xFD partition
by Felix Miata 20 Apr '11

20 Apr '11

Before starting, I looked in /usr/share/doc/manual/opensuse-manuals_en/manual/sec.yast2.system.raid.html and http://www.linuxmanpages.com/man8/mdadm.8.php and http://www.ducea.com/2009/03/08/mdadm-cheat-sheet/ and http://tr.opensuse.org/SDB:Migration_to_Linux_Software_RAID and elsewhere without finding any example of doing what I am trying to do. I want to make /dev/md7 out of sdb14 which is formatted EXT3 and is 86% full of data, plus sda14, which is identically partitioned but virgin space on a brand new HD replacing the old sda. I've already rebuilt /dev/md[0-7]. sdb14 was originally created using the excess of sdb's size over the size of the old sda. On 11.4, I tried using YaST2 to do this, but it won't let me initialize md7 with only the old partition, and I see no clear indication that my data on sdb14 won't be eradicated by initially combining it with sda14 to create md7. So I tried on cmdline instead of YaST2: mdadm --create --verbose /dev/md7 --level=1 /dev/sdb14 missing but that gives an error "mdadm: no raid-devices specified". I tried: mdadm --create --verbose --force -n1 /dev/md7 --level=1 /dev/sdb14 but this gives a warning: mdadm: /dev/sdb14 appears to contain an ext2fs file system size=156280288K mtime=Fri Apr 15 17:42:57 2011 mdadm: Note: this array has metadata at the start and may not be suitable as a boot device. If you plan to store '/boot/ on this device please ensure that your boot-loader understands md/v1.x metadata, or use --metadata=0.90 mdadm: size set to 156579192K Continue creating array? The size disparity between the two size numbers, and lack of mention of the significance of the existing filesystem, has me worried what would happen if I answered yes. Without really thinking about the --create results, I did: mdadm --build --verbose --force -n1 /dev/md7 --level=1 /dev/sdb14 The result was "mdadm: array /dev/md7 built and started." Fsck says /dev/md7 is clean. Mounted, things seemed to be OK, but /proc/mdstat shows differently for md7 than for others: md7 : active raid1 sdb14[0] 156280288 blocks super non-persistent [1/1] [U] md6 : active raid1 sda13[2] sdb13[1] 78140056 blocks super 1.0 [2/2] [UU] bitmap: 0/150 pages [0KB], 256KB chunk md5 : active raid1 sda12[2] sdb12[1] 1036148 blocks super 1.0 [2/2] [UU] bitmap: 0/8 pages [0KB], 64KB chunk md4 : active raid1 sda11[2] sdb11[1] 28362652 blocks super 1.0 [2/2] [UU] bitmap: 0/217 pages [0KB], 64KB chunk Before adding sda14 to md7 with mdadm, does anyone have any comments or advice that might prevent needing to restore sdb14's content from backup? -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 6

[opensuse] I am a beginner in using Linux for programmin so Does Opensuse has Apache and Tomcat and Java and php or can these be installed plus will I be able to get support for programming if needed?
by Varuna Seneviratna 20 Apr '11

20 Apr '11

-- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 4

[opensuse] Can Gnome 3 be installed alongside Gnome 2.32?
by Trey Sizemore 20 Apr '11

20 Apr '11

Has anyone done this with 11.4? If so, how? Thanks! -Trey -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] plain text formatting
by Ken Schneider - openSUSE 20 Apr '11

20 Apr '11

I'm using Thunderbird 3.1.8 on openSUSE 11.4 and cannot find where to set the line width when composing a plain text message. Any ideas from the helpful folks on this list? -- Ken Schneider SuSe since Version 5.2, June 1998 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 7

[opensuse] building lyx results in very large executable file in openSUSE 11.2
by Istvan Gabor 19 Apr '11

19 Apr '11

Hello: I have a question related to building/compiling programs on oS 11.2. Recently I have compiled lyx 2.0.0rc3 with no problems and errors. The compiled program works, but the resulted lyx binary size is ~80 megabytes. The 1.6.9 binary from the build repo is ~7 MB. Earlier when I compiled firefox 2 the resulted binary was ~40 MB, while the official binary was only ~12 MB. What is the reason for getting so large binary files? How could I get a reasonably sized binary? (When I built the program I did not change the options except for --prefix which I set to /usr/local/lyx. I used ./configure, make, make install commands.) Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

6 8

Fwd: Re: [opensuse] Is there a Light CD mage I can Download and boot from it to try Opensuse Like in Fedora and Ubuntu?
by Javier Llorente 19 Apr '11

19 Apr '11

You're welcome. (Forwarding message...). ---------- Mensaje Reenviado ---------- Asunto: Re: [opensuse] Is there a Light CD mage I can Download and boot from it to try Opensuse Like in Fedora and Ubuntu? Fecha: Martes, 19 de Abril de 2011 De: Varuna Seneviratna <varunaseneviratna(a)gmail.com> Para: Javier Llorente <javier(a)opensuse.org> On 19 April 2011 14:09, Javier Llorente <javier(a)opensuse.org> wrote: > Have you taken a look at http://software.opensuse.org/ ? > > Cheers, > -- > Javier Llorente > Thanks Javier, I took a look at the page before But I had noticed only the Heading whaich includes a link to Download 4,7GB DVD image, Thanks to u I now noticed what I want Varuna -------------------------------------------------------

1 0

[opensuse] Is there a Light CD mage I can Download and boot from it to try Opensuse Like in Fedora and Ubuntu?
by Varuna Seneviratna 19 Apr '11

19 Apr '11

-- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] Funny/Sad story about Philips SPC530NC webcam on 11.4
by Marco Calistri 19 Apr '11

19 Apr '11

The funny is that finally I can use my Philips SP530NC Webcam, including its embedded microphone within openSUSE 11.4 The sad is that to do it I have once again to use Microsoft Windows Xp as VirtualBox guest! Several months and kernels passed since my bug-report, but sadly nothing changed http://web.archiveorange.com/archive/v/wmeLDzcjeC9ggvstjU9V The same identical issue is still present on 11.4. This is one of the reasons why sometimes is better to have a "Microsoft option" near of you. -- Marco Calistri http://mcalistri.blogspot.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

10 25

[opensuse] Error launching YaST modules after upgrade to 11.4
by Trey Sizemore 18 Apr '11

18 Apr '11

I have upgraded my 11.3 desktop to 11.4. It appears to have gone off without a hitch. However, when I try to launch many modules from YaST (like Install/Remove Software), I'm getting the following error dialog: terminate called after throwing an instance of 'YUIPluginException' what(): Couldn't load plug-in gtk YaST got signal 6 at YCP file Wizard.ycp:707 /sbin/yast2: line 399: 12837 Aborted $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS Any ideas as to what could be causing this and how to fix? -- Cheers, Trey ---- For the judgement of mankind is as relentless to the weakness that falls short of a recognized renown, as it is jealous of the arrogance that aspires higher than its due. Pericles as quoted by Thucydides, Book II of his history of the Peloponnesian War Linux paris.thesizemores.us 2.6.37.1-1.2-desktop i686 GNU/Linux 11:38am up 0:35, 2 users, load average: 0.23, 0.15, 0.40 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

Re: [opensuse]SSD alignement-option in partitioner usefull ?
by Hans de Faber 18 Apr '11

18 Apr '11

On 18/04/11 14:55, Hans de Faber wrote: > > > On 18/04/11 11:50, Joachim Schrod wrote: >> Cristian Rodríguez wrote: >>> El 17/04/11 13:32, Per Jessen escribió: >>>> Hans de Faber wrote: >>>> >>>>> Now to my opinion,it is desirable that the opensuse partitioner has an >>>>> ssd option to align partition and filesystem properly on this this >>>>> type of devices. Is this a good idea and a reasonable expectation ? >>> >>> It doesnt align SSD partitions automagically, IMHO it should do >>> something like this >>> >>> http://ldn.linuxfoundation.org/blog-entry/aligning-filesystems-ssd%E2 >>> %80%99s-erase-block-size >> >> Since I'm about to buy a (Thinkpad) laptop with an SSD, thanks for >> this hint. >> >> Ted Ts'o wrote this in February 2009 -- did any changes happen in >> SSD technology or Linux kernel in the last 2 years, changes that >> make a difference for installation / system administration in that >> area? >> >> Cheers, >> Joachim >> > The problem is in theory very simple. > An ssd has 512kB eraseblocks. > The filesystem writes in 4kB blocks. > If the 4kB filesystemblocks cross (overlay) the eraseblock boundary than > always 2 blocks of 512kB must be erased. > This is unwanted. Therefore the partition should always start on block > (512Bytes) 0 8 16 and so on. Next partition should start on position 0 > of the first available eraseblock. > > In my case I used the opensuse partitioner defaults and created my first > partition and copied my OS. > It worked fine and very quick. > After that I did some study about ssd's and partitioning and saw that my > first partition started at block 3, not correct. > My story ends with the hdparm command --secure-set-pass NULL > From that moment the drive was no longer accessible in native > command-mode, even the bios did not see the drive. > I switched back to ide mode and saw the drive again in the bios. > But open suse won't start with the ssd on the bus. > Systemrescue-cd starts but gives immediate after boot when first > accessing the device endless loop read-errors . When I disconnect the > drive and reconnect, the boot continues but I have no device designation > at all (/dev/sda?). > > Thats the end of the story, hans This partioning is done in version 11.3 in august 2010 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] Lenovo EasyCamera
by Jan Litwiński 18 Apr '11

18 Apr '11

I have Lenovo G500 laptop with Lenovo EasyCamera web cam. System 11.4 with KDE 4.6 with desktop kernel. Web cam is working but picture is very foggy TIA -- Jan Litwiński http://janek.wroc.prv.pl/ Linux is like a wigwam no gates no windows but apache inside -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

Re: [opensuse] www.open-six.com is dead
by stuart＠bolin.org.uk 18 Apr '11

18 Apr '11

Its open-slx.com not open-six.com not sure if there is a print error on the box. Stuart Tanner ------Original Message------ From: Wolfgang Mueller To: opensuse(a)opensuse.org Subject: [opensuse] www.open-six.com is dead Sent: Apr 18, 2011 09:28 For getting support for 11.4, I found this text on the DVD box: | Please visit www.open-six.com/register and enter your 14-digit | activation code (see sticker below on this box) to register | your product. This will qualify you for installation support. Trying to open www.open-six.com, I got this answer from the so-called Navigationshilfe of Deutsche Telekom: | open-six.com | This domain is parked, pending renewal, or has expired. ... Since this mailing list is available, the installation support is no more necessary. So it is comprehensible that they closed their support site. But I wonder why they still print the text cited above on the DVD box and stick an activation code there. Curious regards, Wolfgang -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org Sent from my BlackBerry® smartphoneN‹§²æìr¸›yéšŠZ)z{.±ï®žË›±Êâmê)z{.±ê+€Z+i×b¶*'jW(šf§vÇ¦j)h¥éìºÇ¾…éi¢—§²ë¢¸

1 1

[opensuse] No route to Internet
by Anton Aylward 18 Apr '11

18 Apr '11

Since a recent update my laptop is no longer connecting to the Internet on my home network when it boots. I run 'route' and it tells me # route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface fast-home * 255.255.255.0 U 0 0 0 eth0 link-local * 255.255.0.0 U 0 0 0 eth0 loopback * 255.0.0.0 U 0 0 0 lo But no default Router 0.0.0.0 UG 0 0 0 eth0 I have to put that in by hand. So, what changed? I run 'ps' and I see root 2587 1 0 07:33 ? 00:00:00 /sbin/dhcpcd --netconfig -L -E -G -c /etc/sysconfig/network/scripts/dhcpcd-hook -t 0 -h Biglaptop eth0 Hmm. Man says -L, --noipv4ll Don't use IPv4LL at all. WHAT?!? -G, --nogateway Don't set any default routes. Where, there's the problem! So when did these creep in? A couple of days ago. Looking at my zypper logs I see updates/deltas for dhcpcd on 20110411 dhcp-client-4.1.2.ESV.1-0.6.1.i586.rpm and 20110415. dhcpcd-3.2.3-61.64.1.i586.rpm' # rpm -q -info dhcpcd Name : dhcpcd Relocations: (not relocatable) Version : 3.2.3 Vendor: openSUSE Release : 61.64.1 Build Date: Mon 11 Apr 2011 10:05:03 AM EDT Install Date: Thu 14 Apr 2011 09:09:36 AM EDT Build Host: build33 Group : Productivity/Networking/Boot/Clients Source RPM: dhcpcd-3.2.3-61.64.1.src.rpm Size : 94678 License: GPLv2+ Signature : RSA/8, Mon 11 Apr 2011 10:05:19 AM EDT, Key ID b88b2fd43dbdc284 Packager : http://bugs.opensuse.org URL : http://developer.berlios.de/projects/dhcpcd/ Summary : A DHCP Client Daemon In there somewhere was a change to /etc/sysconfig/network/dhcp that set # Should the DHCP client set a default route (default Gateway) (yes|no) DHCLIENT_SET_DEFAULT_ROUTE="no" Is there an rpm option to see when that change which resulted in the "-G" was introduced? The "-q -changelog" only gives the change summary. -- By nature's law, every man has a right to seize and retake by force his own property taken from him by another, by force of fraud. Nor is this natural right among the first which is taken into the hands of regular government after it is instituted. It was long retained by our ancestors. It was a part of their common law, laid down in their books, recognized by all the authorities, and regulated as to circumstances of practice. --Thomas Jefferson -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] Re: SSD alignement-option in partitioner usefull ?
by Joachim Schrod 18 Apr '11

18 Apr '11

Cristian Rodríguez wrote: > El 17/04/11 13:32, Per Jessen escribió: >> Hans de Faber wrote: >> >>> Now to my opinion,it is desirable that the opensuse partitioner has an >>> ssd option to align partition and filesystem properly on this this >>> type of devices. Is this a good idea and a reasonable expectation ? > > It doesnt align SSD partitions automagically, IMHO it should do > something like this > > http://ldn.linuxfoundation.org/blog-entry/aligning-filesystems-ssd%E2 > %80%99s-erase-block-size Since I'm about to buy a (Thinkpad) laptop with an SSD, thanks for this hint. Ted Ts'o wrote this in February 2009 -- did any changes happen in SSD technology or Linux kernel in the last 2 years, changes that make a difference for installation / system administration in that area? Cheers, Joachim -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Joachim Schrod Email: jschrod(a)acm.org Roedermark, Germany -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] What causes the udisk-deamon to start at bootup
by Mark Hounschell 18 Apr '11

18 Apr '11

Short of removing the useless udisks package, how can I prevent the udisk-deamon from starting. I have a number of SuSE-11.3 and 11.4 machines all of which have udisks installed. Some do not have the udisks-deamon running some do. Whats the trigger? Thanks Mark -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

10 24

[opensuse] www.open-six.com is dead
by Wolfgang Mueller 18 Apr '11

18 Apr '11

For getting support for 11.4, I found this text on the DVD box: | Please visit www.open-six.com/register and enter your 14-digit | activation code (see sticker below on this box) to register | your product. This will qualify you for installation support. Trying to open www.open-six.com, I got this answer from the so-called Navigationshilfe of Deutsche Telekom: | open-six.com | This domain is parked, pending renewal, or has expired. ... Since this mailing list is available, the installation support is no more necessary. So it is comprehensible that they closed their support site. But I wonder why they still print the text cited above on the DVD box and stick an activation code there. Curious regards, Wolfgang -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 2

[opensuse] Google body browser
by Roger Oberholtzer 18 Apr '11

18 Apr '11

Anyone able to use this site on openSUSE 11.4 with firefox 4.0 (from OBS)? http://bodybrowser.googlelabs.com/ I tried the suggestion about nvidia drivers (MOZ_GLX_IGNORE_BLACKLIST=1 firefox), but it made no difference. The site tells me: "Google Body uses WebGL, a new standard for 3D on the Web. Your browser supports WebGL, but WebGL is not initializing properly." -- Roger Oberholtzer OPQ Systems / Ramböll RST Ramböll Sverige AB Krukmakargatan 21 P.O. Box 17009 SE-104 62 Stockholm, Sweden Office: Int +46 10-615 60 20 Mobile: Int +46 70-815 1696 SHAW'S PRINCIPAL Build a system that even a fool can use, and only a fool will want to use it. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

11 21

[opensuse] [Bug Squad] Gwibber crashes when adding twitter account
by Dimstar / Dominique Leuenberger 18 Apr '11

18 Apr '11

Good morning everybody, A while back I received a bug regarding gwibber crashing when one adds/enables a twitter account (on openSUSE 11.4). I tried to locate and isolate it and have since created a test package of what I believe is causing the issue. Unfortunately, it seems the original bug reporter is now on holiday or otherwise busy, and thus seems not to have time to test this patched package. As such I would like to ask you all, if you experience the same problem as described in bnc#681705 [1]. If you do, it could be of great help to test the packages I provide in the patch (an additional repository.. info in the bug report). This of course just if you actually see the issue. If you don't there is no reason to do any tests. Thank you all for your help, Dominique [1] https://bugzilla.novell.com/show_bug.cgi?id=681705 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] lirc-kmp for 11.4
by richard -rw- weinberger 17 Apr '11

17 Apr '11

Hi, Has lirc-kmp been dropped? I need the lirc_atiusb kernel module to use my X10 remote. -- Thanks, //richard -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] FireFox 4 - Status Bar? which one is the normal good old standard status bar?
by David C. Rankin 17 Apr '11

17 Apr '11

Guys, Firefox 4 is driving me nuts. What do you mean "there is no status bar?" Can't we just have a browser that comes complete anymore? Why do I have to go hunting and pecking through some list of available (and of dubious origin) add-ons just to get what has already been there back? </rant off> Which brings me to the point of this frustrating process. What, out of the miriad of add-ons, will give me the normal firefox status bar back? Thanks. Note: progress does not equate to removing things that work and are not broken. -- David C. Rankin, J.D.,P.E. Rankin Law Firm, PLLC -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

7 10

[opensuse] Screen Resolution
by Wolfgang Mueller 17 Apr '11

17 Apr '11

I have installed Suse 11.4 on my new laptop, an Acer Aspire 7551G. According to Acer's product description the computer has a WSXGA Display with 1600x900 pixels. My X runs well, but I have the impression that it uses a smaller resolution than 1600x900. So I have two questions: 1. How can I determine the resolution used by my X? 2. In case it is lower, how can I force X to use 1600x900 px? Thanks advance for you help and best regards, Wolfgang -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

6 21

[opensuse] PPD guru needed - Sharp Copier - need to find a suitable PPD
by David C. Rankin 17 Apr '11

17 Apr '11

Guys, This one will stretch your mind a bit, but I need to find the best PPD for a Sharp AR-505 copier. I have 2 sharp copiers, an AR-M355N (which already has a Linux PPD that works great), and an AR-505 that I can't find a Linux PPD for. I got the AR-505 configured in CUPS on my server as ipp://ip.to.the.copier/lp and I am able to use the laserjet 4 PPD to get it to print, but the margins are a bit different. I found an old IBM document that showed the AR-505 talked PCL5e and LPR: http://www-01.ibm.com/support/docview.wss?uid=nas154255e0ec5a3c13f862569c10… There are a number of windows XP and Mac drivers (not OS X) available for this copier, but no linux PPD. So what I want to do is see if there is a PPD that would work with this machine better than the foomatic/ljet4 I currently have. Has anyone ever done this kind of creative mix and match of PPDs with a copier before? If so, any tricks, or is it just trial and error? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 4

[opensuse] Atheros AR5B95
by Ilya Chernykh 17 Apr '11

17 Apr '11

How to make openSUSE to work with this wireless adapter? No program unde3r 11.4 is able to list available networks. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 4

[opensuse] openSUSE Weekly News 171 is out!
by Sascha Manns 16 Apr '11

16 Apr '11

We are pleased to announce: Issue 171 of openSUSE Weekly News is out! [0] In this Issue: GNOME3 iso by fcrozat and ATI radeon driver… a quick easy fix! New available: german openSUSE Podcast openSUSE Tumbleweed status for the week of April 9, 2011 Linux 2.6.39-rc3 and many more … For a list of available translations see the Translations Section in the actual Weekly News. [0] http://bit.ly/eIp8GB (in PDF) [0] http://bit.ly/fXlnTk (in HTML with Bento Theme) [0] http://bit.ly/i6ODWu (in HTML with Susebooks Theme)) -- Sincerely yours Sascha Manns open-slx.com openSUSE Community & Support Agent openSUSE Marketing Team Blog: http://saigkill.wordpress.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0