October 2006 - openSUSE Users - openSUSE Mailing Lists

Slow 3D with NVidia.
by Carlos E. R. 22 Nov '06

22 Nov '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 SuSE 10.1, stock plus YOU updates Pentium 4, 1800 Mhz, 1GiB ram GeForce2 MX/MX 400 (supported according to http://www.nvidia.com/object/IO_18897.html) I wanted to check FlightGear, therefore I had to activate 3D and accel. I downloaded the newest nvidia driver, NVIDIA-Linux-x86-1.0-8776-pkg1.run. I modified /etc/X11/xorg.conf in the same way I had done previously in 9.3 where it worked, and rebooted. I try "glxgears", small window: cer@nimrodel:~> glxgears 3596 frames in 5.0 seconds = 719.072 FPS 4023 frames in 5.0 seconds = 804.191 FPS 4011 frames in 5.0 seconds = 802.194 FPS full screen 697 frames in 5.0 seconds = 139.220 FPS 652 frames in 5.0 seconds = 130.221 FPS The gears turn slowly, and the main cpu soars to 100%. This is not normal. 3D games like ppracer (Planet Penguin racer) And Flight Gear (Flight simulator) do work, but slowly, play may stop and jerk for a second now and then. At least ppracer worked fine a year ago with SuSE 9.3. But the fact that they work prove there is 3D, otherwise they would refuse to work. I have switched from a depth of 24 bits to 16, but I don't see much difference: 7878 frames in 5.0 seconds = 1575.520 FPS <-- small window 7657 frames in 5.0 seconds = 1531.376 FPS 6948 frames in 5.0 seconds = 1389.504 FPS 7800 frames in 5.0 seconds = 1559.852 FPS 2162 frames in 5.0 seconds = 432.110 FPS <--- Full window 1394 frames in 5.0 seconds = 278.762 FPS 5008 frames in 5.0 seconds = 1001.516 FPS cpu at 100% (90% for process glxgears). Ideas? /var/log/Xorg.0.log: (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Option "NvAGP" "3" (**) NVIDIA(0): Option "Rotate" "off" (**) NVIDIA(0): Enabling RENDER acceleration (**) NVIDIA(0): Disabling static screen rotation. (II) NVIDIA(0): NVIDIA GPU GeForce2 MX/MX 400 at PCI:1:0:0 (--) NVIDIA(0): VideoRAM: 65536 kBytes (--) NVIDIA(0): VideoBIOS: 03.11.01.24.87 (II) NVIDIA(0): Detected AGP rate: 4X (--) NVIDIA(0): Interlaced video modes are not supported on this GPU (--) NVIDIA(0): Connected display device(s) on GeForce2 MX/MX 400 at (--) NVIDIA(0): PCI:1:0:0: (--) NVIDIA(0): Mag InnoVision (CRT-0) (--) NVIDIA(0): Brooktree 869 TV Encoder (TV-0) (--) NVIDIA(0): Mag InnoVision (CRT-0): 350.0 MHz maximum pixel clock (--) NVIDIA(0): Brooktree 869 TV Encoder (TV-0): 165.0 MHz maximum pixel (--) NVIDIA(0): clock (--) NVIDIA(0): TV encoder: Brooktree 869 (II) NVIDIA(0): Assigned Display Device: CRT-0 (WW) NVIDIA(0): No valid modes for "1280x1024"; removing. (II) NVIDIA(0): Validated modes: (II) NVIDIA(0): "1024x768" (II) NVIDIA(0): "800x600" (II) NVIDIA(0): "640x480" (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768 (WW) NVIDIA(0): No size information available in CRT-0's EDID; cannot compute (WW) NVIDIA(0): DPI from EDID. (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xd0000000 - 0xd7fffff0 (0x7fffff1) MX[B] ... (II) NVIDIA(0): Setting mode "1024x768" (II) Loading extension NV-GLX (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture (==) NVIDIA(0): Backing store disabled (==) NVIDIA(0): Silken mouse enabled (**) Option "dpms" (**) NVIDIA(0): DPMS enabled (II) NVIDIA(0): v4l[/dev/video0]: using hw video scaling [YUY2]. (II) Loading extension NV-CONTROL (WW) NVIDIA(0): Option "CalcAlgorithm" is not used (**) RandR enabled nimrodel:~ # glxinfo name of display: :0.0 display: :0 screen: 0 direct rendering: Yes server glx vendor string: NVIDIA Corporation server glx version string: 1.4 server glx extensions: GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGI_video_sync, GLX_SGI_swap_control client glx vendor string: NVIDIA Corporation client glx version string: 1.4 client glx extensions: GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context, GLX_SGI_video_sync, GLX_NV_swap_group, GLX_NV_video_out, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGI_swap_control, GLX_NV_float_buffer, GLX_ARB_fbconfig_float GLX extensions: GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGI_video_sync, GLX_SGI_swap_control, GLX_ARB_get_proc_address OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce2 MX/AGP/SSE2 OpenGL version string: 1.5.6 NVIDIA 87.76 OpenGL extensions: GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_pixel_buffer_object, GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shader_objects, GL_ARB_shading_language_100, GL_ARB_texture_compression, GL_ARB_texture_cube_map, GL_ARB_texture_env_add, GL_ARB_texture_env_combine, GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat, GL_ARB_texture_rectangle, GL_ARB_transpose_matrix, GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader, GL_ARB_window_pos, GL_S3_s3tc, GL_EXT_texture_env_add, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color, GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint, GL_EXT_compiled_vertex_array, GL_EXT_Cg_shader, GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_paletted_texture, GL_EXT_pixel_buffer_object, GL_EXT_point_parameters, GL_EXT_rescale_normal, GL_EXT_secondary_color, GL_EXT_separate_specular_color, GL_EXT_shared_texture_palette, GL_EXT_stencil_wrap, GL_EXT_texture_compression_s3tc, GL_EXT_texture_cube_map, GL_EXT_texture_edge_clamp, GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic, GL_EXT_texture_lod, GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_vertex_array, GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat, GL_KTX_buffer_region, GL_NV_blend_square, GL_NV_fence, GL_NV_fog_distance, GL_NV_gpu_program_parameters, GL_NV_light_max_exponent, GL_NV_packed_depth_stencil, GL_NV_pixel_data_range, GL_NV_point_sprite, GL_NV_register_combiners, GL_NV_texgen_reflection, GL_NV_texture_env_combine4, GL_NV_texture_rectangle, GL_NV_vertex_array_range, GL_NV_vertex_array_range2, GL_NV_vertex_program, GL_NV_vertex_program1_1, GL_SGIS_generate_mipmap, GL_SGIS_multitexture, GL_SGIS_texture_lod, GL_SUN_slice_accum visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat - ---------------------------------------------------------------------- 0x21 24 tc 0 32 0 r y . 8 8 8 0 4 24 8 16 16 16 16 0 0 None 0x22 24 dc 0 32 0 r y . 8 8 8 0 4 24 8 16 16 16 16 0 0 None 0x23 24 tc 0 32 0 r y . 8 8 8 8 4 24 8 16 16 16 16 0 0 None 0x24 24 tc 0 32 0 r . . 8 8 8 0 4 24 8 16 16 16 16 0 0 None 0x25 24 tc 0 32 0 r . . 8 8 8 8 4 24 8 16 16 16 16 0 0 None 0x26 24 tc 0 32 0 r y . 8 8 8 0 4 24 0 16 16 16 16 0 0 None 0x27 24 tc 0 32 0 r y . 8 8 8 8 4 24 0 16 16 16 16 0 0 None 0x28 24 tc 0 32 0 r . . 8 8 8 0 4 24 0 16 16 16 16 0 0 None 0x29 24 tc 0 32 0 r . . 8 8 8 8 4 24 0 16 16 16 16 0 0 None 0x2a 24 tc 0 32 0 r y . 8 8 8 0 4 16 0 16 16 16 16 0 0 None 0x2b 24 tc 0 32 0 r y . 8 8 8 8 4 16 0 16 16 16 16 0 0 None 0x2c 24 tc 0 32 0 r . . 8 8 8 0 4 16 0 16 16 16 16 0 0 None 0x2d 24 tc 0 32 0 r . . 8 8 8 8 4 16 0 16 16 16 16 0 0 None 0x2e 24 tc 0 32 0 r y . 8 8 8 0 4 0 0 16 16 16 16 0 0 None 0x2f 24 tc 0 32 0 r y . 8 8 8 8 4 0 0 16 16 16 16 0 0 None 0x30 24 tc 0 32 0 r . . 8 8 8 0 4 0 0 16 16 16 16 0 0 None 0x31 24 tc 0 32 0 r . . 8 8 8 8 4 0 0 16 16 16 16 0 0 None 0x32 24 dc 0 32 0 r y . 8 8 8 8 4 24 8 16 16 16 16 0 0 None 0x33 24 dc 0 32 0 r . . 8 8 8 0 4 24 8 16 16 16 16 0 0 None 0x34 24 dc 0 32 0 r . . 8 8 8 8 4 24 8 16 16 16 16 0 0 None 0x35 24 dc 0 32 0 r y . 8 8 8 0 4 24 0 16 16 16 16 0 0 None 0x36 24 dc 0 32 0 r y . 8 8 8 8 4 24 0 16 16 16 16 0 0 None 0x37 24 dc 0 32 0 r . . 8 8 8 0 4 24 0 16 16 16 16 0 0 None 0x38 24 dc 0 32 0 r . . 8 8 8 8 4 24 0 16 16 16 16 0 0 None 0x39 24 dc 0 32 0 r y . 8 8 8 0 4 16 0 16 16 16 16 0 0 None 0x3a 24 dc 0 32 0 r y . 8 8 8 8 4 16 0 16 16 16 16 0 0 None 0x3b 24 dc 0 32 0 r . . 8 8 8 0 4 16 0 16 16 16 16 0 0 None 0x3c 24 dc 0 32 0 r . . 8 8 8 8 4 16 0 16 16 16 16 0 0 None 0x3d 24 dc 0 32 0 r y . 8 8 8 0 4 0 0 16 16 16 16 0 0 None 0x3e 24 dc 0 32 0 r y . 8 8 8 8 4 0 0 16 16 16 16 0 0 None 0x3f 24 dc 0 32 0 r . . 8 8 8 0 4 0 0 16 16 16 16 0 0 None 0x40 24 dc 0 32 0 r . . 8 8 8 8 4 0 0 16 16 16 16 0 0 None - -- Cheers, Carlos Robinson -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFFOXo9tTMYHG2NR9URAksYAJ93wv9R/1LI4uGnQGgDj+rm7f4UDACeLSKf 7/m/Ft92y86rD5u+muoMMHA= =t1IV -----END PGP SIGNATURE-----

11 54

One way sharing!!
by Puneit Singh 15 Nov '06

15 Nov '06

Hi, I am using Samba to share my computer over a windows network. I can access any computer(there are over 400 computers) on LAN but no one can access. They can't do it.. I am pasting the output of testparam for your reference..Any pointers will be helpful linux-fh4f:/etc/samba # testparm /etc/samba/smb.conf Load smb config files from /etc/samba/smb.conf Processing section "[homes]" Processing section "[shared]" Global parameter guest account found in service section! Loaded services file OK. WARNING: passdb expand explicit = yes is deprecated Server role: ROLE_STANDALONE Press enter to see a dump of your service definitions [global] workgroup = MSHOME netbios name = PUNEIT server string = puneit_singh security = SHARE map to guest = Bad User server signing = auto printcap name = cups add machine script = /usr/sbin/useradd -c Machine -d /var/lib/nobody -s /bin/false %m$ logon path = \\%L\profiles\.msprofile logon drive = P: logon home = \\%L\%U\.9xprofile os level = 2 preferred master = No local master = No domain master = No ldap ssl = no usershare max shares = 100 hosts allow = 192.168.0.0/255.255.255.0 cups options = raw include = /etc/samba/dhcp.conf [homes] comment = Home Directories valid users = %S, %D%w%S read only = No inherit acls = Yes browseable = No [shared] path = /home/puneit/Shared/ username = prometheus read only = No guest only = Yes guest ok = Yes case sensitive = No msdfs proxy = no -- Puneit Singh 0091-9350832020

10 25

Can't boot boot iso
by Susemail 13 Nov '06

13 Nov '06

I reboot my laptop with openSUSE-10.2-Beta1-i386-mini.iso in the cd drive but it boots to the grub menu every time. The laptop will boot the 10.0 cd Is there something else I need to do? (Make the iso bootable?) Thanks, Jerome

6 14

Belkin Wireless G Plus Desktop Card F5D7001 Installed in SuSE 10.1
by wmeler 13 Nov '06

13 Nov '06

I am trying to get my Belkin Wireless G Plus Desktop Card F5D7001 installed in SuSE 10.1 and I have no idea where to start. It is not being detected, though it is in a PCI slot in my Dell PowerEdge. -- Cheers, wmeler

3 5

Apache 2.0.5x for SUSE 10.1?
by Anders Norrbring 12 Nov '06

12 Nov '06

Does anyone have an Apache 2.0.5x build for SUSE 10.1 i586? I tried to build 2.0.54 from the source RPM for 10.0, but unfortunately it fails with these statements: ssl_engine_pphrase.c: In function â€˜ssl_pphrase_Handle_CBâ€™: ssl_engine_pphrase.c:684: error: â€˜PEM_F_DEF_CALLBACKâ€™ undeclared (first use in this function) ssl_engine_pphrase.c:684: error: (Each undeclared identifier is reported only once ssl_engine_pphrase.c:684: error: for each function it appears in.) make[4]: *** [ssl_engine_pphrase.slo] Error 1 make[4]: Leaving directory `/usr/src/packages/BUILD/httpd-2.0.54/modules/ssl' make[3]: *** [shared-build-recursive] Error 1 make[3]: Leaving directory `/usr/src/packages/BUILD/httpd-2.0.54/modules/ssl' make[2]: *** [shared-build-recursive] Error 1 make[2]: Leaving directory `/usr/src/packages/BUILD/httpd-2.0.54/modules' make[1]: *** [shared-build-recursive] Error 1 make[1]: Leaving directory `/usr/src/packages/BUILD/httpd-2.0.54' make: *** [all-recursive] Error 1 error: Bad exit status from /var/tmp/rpm-tmp.46175 (%build) RPM build errors: Unknown option ? in verify_permissions(:-:) Bad exit status from /var/tmp/rpm-tmp.46175 (%build) I would really like to use the older Apache.. -- Anders Norrbring Norrbring Consulting

6 18

[opensuse] usb drive format
by jdd 11 Nov '06

11 Nov '06

I have an usb drive new with ntfs on it. if I plug it in, it's mounted. as so, I can't make a file system on it (disk mounted) and I can't umount it (nothing relies on it, but umount think it's used) what is the standard procedure to have mkfs.ext3 run on it? may I use -F without risk (the drive is empty) thanx jdd -- http://www.dodin.net http://dodin.org/galerie_photo_web/expo/index.html http://lucien.dodin.net http://fr.susewiki.org/index.php?title=Gérer_ses_photos --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 3

amazon.de vs. (new) RealPlayer of 10.x
by pelibali 11 Nov '06

11 Nov '06

Hi, On my SUSE 9.1 I have no similar problem, but remembering earlier on SUSE 10.0 having an issue with media content (e.g. listening part of songs you can buy on CD) of http://www.amazon.de . It was solved later on and the most recent RealPlayer of 10.0 works flawlessly, but now I started to have the same problem on 10.2 beta 1. I googled for the answer, but that just made me more confused; would someone describe the status of this briefly?! Some saying (and the player itself also says so) that amazon's "outdated" content is not supported anymore, other people suggest not working workarounds... Thank you, Pelibali

2 2

nVidia driver
by Fred A. Miller 10 Nov '06

10 Nov '06

I've also noticed that the performace of the nVidia commercial driver stinks! I have a PCI Express 16X card with the Geforce FX 5300 chipset. In the past, it's proved to be very quick.......NOT now!! Below are my results with glxgears.......this is a P-4 3.2Ghz. box. Fred 3776 frames in 5.1 seconds = 744.131 FPS 4469 frames in 5.0 seconds = 893.677 FPS 6473 frames in 5.0 seconds = 1294.524 FPS 6480 frames in 5.0 seconds = 1295.932 FPS 6548 frames in 5.0 seconds = 1309.598 FPS -- MickySoft, the ultimate corporate parasite.

22 89

Re: [opensuse] Split the packages
by Alexey Eremenko 10 Nov '06

10 Nov '06

On 10/27/06, Les Howell <hlhowell(a)pacbell.net> wrote: > The R package is for local installation on a client that contains a hard > disk. The U version is for "diskless clients", where the system software > resides on a file server, say for a college class room for example, which > would save the cost of the disks and centralize software control and > updates. > > Regards, > Les H OK, but how to devide the package say, FireFox or GIMP into such two packages? what must go to first "U" and what to second "R" ? --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

7 12

Installing 10.2 beta 1: read this BEFORE installing
by Basil Chupin 10 Nov '06

10 Nov '06

http://en.opensuse.org/Bugs:Most_Annoying_Bugs Read this before insalling. It's got something there which has been plaguing me for ~ installs now :-( . Perhaps my next (re)install will now go smoothly--maybe, possibly, fingers crossed. Cheers. -- I'm dangerous when I know what I'm doing.

14 59