January 2006 - openSUSE Users - openSUSE Mailing Lists

Re: [SLE] "Fun" with X
by Kai Ponte 03 Feb '06

03 Feb '06

> When I went to use an app last night, I received a message stating > that I did not have 3D enabled. When I went into Yast to change the > setting, I was given a message stating that I needed to setup the > monitor; it was set to Vesa, and should have been set to my monitor > via the manufacturers disk. When I setup my monitor I received a > parse error for the config file. > > I wasn't able to set up the monitor, not even with generic Vesa > settings, and upon restarting X I was bumped to command line. I > tried to set things up via sax but had same results, unless I took > sax recommendation only. Now not only is the monitor with generic > settings, but also mouse and keyboard. If I try to make any > adjustments in Yast or directly in sax I'm back on the same > merry-go-round. > > Thoughts??? By sax you mean sax2, right? I'm only wondering if you've dropped into runlevel 3. That's the typical level you want to be in for running sax2. HTH...? -- kai ponte www.perfectreign.com linux - genuine windows replacement part

5 11

mp3
by Andrea Poloni 03 Feb '06

03 Feb '06

Hi, can someone sudjest me a MP3 ripper for suse 10.0 thanks Andrea

7 8

Firefox with apt-get
by Per Kustemo 02 Feb '06

02 Feb '06

Hi Tried to install Firefox with apt-get. "apt-get install MozillaFirefox" But the ver of firefox there is just 1.0.7, is there another way to install the firefox with the apt-get? How can I install it in another way if it is not possible with apt-get? Have tried to just download the compressed file from mozilla.com and have been able to get 1.5 to start but what is the right way to install a program from a compressed file (where do I put it and so on)? Have no knowledge in the world of Linux, but hoping to learn :)..... /Per

5 11

Re: [SLE] epson ink level - SuSE-10 oss
by Kai Ponte 02 Feb '06

02 Feb '06

> Anyone managed to check epson ink level using the kde printing manager. Seems > to require raw mode, but then you can't specify a printer driver! mtink > compiles but doesn't run, kink won't compile. Thanks for the tip on these! This is cool. Aso for kInk, have you installed libinklevel? -- kai ponte www.perfectreign.com linux - genuine windows replacement part

2 1

Fwd: [SLE] Partition Magic
by Kevanf1 02 Feb '06

02 Feb '06

Once again, Gmail sent it direct to Carl..GGGRRRRRR...sorry Carl. On 30/01/06, Carl William Spitzer IV <cwsiv(a)myrealbox.com> wrote: > From: > Hiren <thankihiren(a)hotmail.com> > To: > cwsiv(a)myrealbox.com > Subject: > Re: 7.7 > Date: > Sun, 8 Jan 2006 11:18:31 -0000 > (03:18 PST) > > *** Happy New Year *** > Hiren's BootCD 7.7 (US Keyboard) + Keyboard Patch > http://www.megaupload.com/?d=CD4Q92OB > More Information on BootCD 7.7 > http://homepage.ntlworld.com/hiren.thanki/bootcd77.html > How to burn image on CD? > http://homepage.ntlworld.com/hiren.thanki/how_to_burn_iso.html > BootCD on USB Pen Drive > http://homepage.ntlworld.com/hiren.thanki/bootcd_on_usb_disk.html > > Please Note: This cd contains some unlicensed commercial software, The > use > of unlicensed software is illegal. > > Have Fun. > > Hiren. > > > Just don't use the rar file its busted the top link will get you a zip. > > Enjoy :) > Cheers Carl. I must apologise because I have already been in contact with Hiren :-) He gave me the exact same information. I had meant to pass it on to the list members myself but life intruded and the idea got side lined. So, sorry everyone but three cheers to Carl for putting the link up. It is well worth getting and has already been rather useful when I have been messing about on Windows PC's. Lastly, a second apology for this being OT and perhaps we should have moved it over to the OT list. MY fault for asking the question here instead of migrating it -- ============================================== I am only human, please forgive me if I make a mistake it is not deliberate. ============================================== Xmas may be over but, PLEASE DON'T drink and drive you'll make it to the next one that way. Kevan Farmer Linux user #373362 Cheslyn Hay Staffordshire WS6 7HR -- ============================================== I am only human, please forgive me if I make a mistake it is not deliberate. ============================================== Xmas may be over but, PLEASE DON'T drink and drive you'll make it to the next one that way. Kevan Farmer Linux user #373362 Cheslyn Hay Staffordshire WS6 7HR

2 1

Strange behavior in konqueror and kmail
by Peter Collier 02 Feb '06

02 Feb '06

While in the above two programs, pressing the ctrl key brings up many 1/4 inch yellow boxes with different letters in them over the top of the application. Pressing the alt key removes them. Doesn't appear to happen on other apps. I little bit annoying, wondered if it was of concern because often these boxes appear on top of links. Running opensuse 10.0, kde desktop. Peter C

7 13

epson ink level - SuSE-10 oss
by Mr Jiff 01 Feb '06

01 Feb '06

Anyone managed to check epson ink level using the kde printing manager. Seems to require raw mode, but then you can't specify a printer driver! mtink compiles but doesn't run, kink won't compile. Geoff

3 4

eth0 now eth1 WTF? Network woes....The saga....[Long]
by david rankin 01 Feb '06

01 Feb '06

Mates, I have built a new box for the house, and it is testing my understanding of Linux. It is also testing logic. I know I'm aging, but I have ruled out Alzheimer's. Here is the scoop. When I first installed SuSE 10, the network would come up and it used eth0: Simply /etc/sysconfig/network/ifcfg-eth-id-00:4c:69:6e:75:79 would bring up the Linksys card as eth0. This is how it worked. Then on a subsequent reboot the network doesn't come up. I mean loopback is fine, but the NIC fails to load and the error is "unable to load mandatory services.." Yes, I understand the mandatory devices loading and /etc/sysconfig/network/config. On reboot, the network fails. dmesg says it is now trying to load eth1? Ok, cp ifcfg-eth-id-00:4c:69:6e:75:79 ifcfg-eth1 rcnetwork restart -- presto! it comes up. So then I leave both ifcfg-eth-id-00:4c:69:6e:75:79 and ifcfg-eth1 in /etc/sysconfig/network. Some subsequent reboots work some fail. Latest reboot, network fails, /var/log/boot.omsg says it is now looking for: doneWaiting for mandatory devices: eth-id-00:4c:69:6e:75:79 19 Initializing random number generatordone <notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=0 SPLASH=no ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/resmgrd ] Starting resource managerdone 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 0 eth-id-00:4c:69:6e:75:79 No interface found failedSetting up service network . . . . . . . . . . . . . . . .failed I only have 1 NIC? What is going on? OK, next go round it complains that it is now looking for another hardware address for eth1 - no changes to the system... It is looking for the NIC at 00:04:5a:87:c8:43. WTF? OK, easy enough: cp eth-id-00:4c:69:6e:75:79 eth-id-00:04:5a:87:c8:43; rm eth-id-00:4c:69:6e:75:79. rcnetwok restart -- it works! Reboot. I understand that the pci bus and the order that devices are activated and their addresses are dynamic. But where do I stop the randomness?? doneWaiting for mandatory devices: eth-id-00:04:5a:87:c8:43 19 17 eth1 device: Linksys NC100 Network Everywhere Fast Ethernet 10/100 (rev 11) eth1 configuration: eth-id-00:04:5a:87:c8:43 eth1 IP address: 192.168.6.16/24 doneSetting up service network . . . . . . . . . . . . . . . .done OK, great -- for now. Obviously, I can't have a server that when it goes down, it comes up and the network (for whatever reason) is "guessing" at the hw address for the NIC. What in the heck is going on? So the questions: (1) why is my system now wanting to load the NIC as eth1 instead of eth0? (2) how in the heck is the hardware address changing? (I set the kernel parameters noapic and nolapic in grub to try and cure it -- no joy) I have read all the discussion on eth0, eth1 -- I know it doesn't matter what binding the system makes, but I just want to find a way to have my NIC come up each time in case I'm 1000 miles away when the power exhausts the UPC. Do I go to a straight ifcfg-eth0 and ifcfg-eth1 setup in /etc/network/sysconfig? Do I put both eth-id-00:4c:69:6e:75:79 and eth-id-00:04:5a:87:c8:43 in there (seems like a lame Band-Aid approach) What is the best way to solve this conundrum??? -- David C. Rankin, J.D., P.E. RANKIN LAW FIRM, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 (936) 715-9333 (936) 715-9339 fax www.rankinlawfirm.com --

10 30

EPSON 5900L vs SuSE10
by vince＠complex.elte.hu 01 Feb '06

01 Feb '06

hello, I have a problem to print on SuSE10 using EPSON EPL-5900L. So far I have tried with this: 1. I generated Epson-EPL-5900L-epl5900l.ppd and tried to set up in YAST>HARDWARE>PRINTERS 2. Installed ghostscript.omni. 3. Played with UTILITIES>PRINTING>PRINTING MANAGER No positive result in all cases...no patient nither any more :). Printing with LPR even tells me that there is no entry. What to do? Oliver

3 2

Re: [SLE] epson ink level - SuSE-10 oss
by Kai Ponte 01 Feb '06

01 Feb '06

> Anyone managed to check epson ink level using the kde printing manager. Seems > to require raw mode, but then you can't specify a printer driver! mtink > compiles but doesn't run, kink won't compile. > > Geoff As a follow-up, after installing libinklevel (http://libinklevel.sourceforge.net/index.html) I configured kink correctly but then got the following nasty error when running make... \/usr/lib/qt3/include/private/qucomextra_p.h:87: warning: struct QUType_varptr has virtual functions but non-virtual destructor kink.cpp: In member function void KInk::add_device_to_list(int, int, unsigned char*): kink.cpp:159: error: invalid conversion from unsigned char* to const char* make[2]: *** [kink.o] Error 1 make[2]: Leaving directory `/home/kai/downloads/kink-0.2.1/kink-0.2.1/kink' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/kai/downloads/kink-0.2.1/kink-0.2.1' make: *** [all] Error 2 -- kai ponte www.perfectreign.com linux - genuine windows replacement part

4 3