August 2000 - openSUSE Users - openSUSE Mailing Lists

APM still at it(Not Resolved
by SuSe Mailling List subscriber 07 Nov '01

07 Nov '01

Hi, Last night i posted message asking on help to aviod my system shutdown by it self. Well put statement suggested in lilo.con in the appriate localtion suggested but jut know the system in question just power off again for no good reason. I am running SuSe 7.1 Kernel 2.4.13 Mantel RPM. 512 MB RAM 10 GB (ReiserFS / ext2 /boot) Matorx Millimum 2 MB (It's work machine ) D-Link 538 TX+ 10/100 MB What noticed this occurs when memory drop below 350 MB the system shutdown when i am going in to X/Gnome. What i find strange is i am running RH 7.1 + Kernel 2.4.13 Kernel.org with exact same MB/RAM/HD/NIC etc.. and all it well with it. I have had this problems since kernel 2.4.0 . I have checked RAM with memtest and it check out i have switched ram from RH 7.1 Box with this one done memory test as well it check out but still occurs. I have always love SuSe but seriously thinking of calling it quit's with this distro. I never any problems with other distro/kernels acting like this. Any ideas :) Alex :)

3 5

[SLE] Realplayer G2 and SuSE 6.3
by richard＠activitysuperstore.com 13 Aug '01

13 Aug '01

Hi Has anyone got Realplayer G2 working with SuSE 6.3? If so, is it straight forward to install? I have got an alpha version of the generic binary for kernel 2.2. What install procedure did you use? Is it stable enough to use? Thanks Rich <HR> <UL> <LI>application/ms-tnef attachment: stored </UL> N§²æìržzÇ§ué[h²ë)îÅë§²æìržzË¬yÊ&ÚuØÚÊ&©Ý²Ç§ué[h²ë)îÅè^.±ç([(rØ^¶m§ÿðÃ.±ç(ô®Š+·ðèïÅ

5 4

Where is package hardsuse?
by George H. Griffin 25 Jun '01

25 Jun '01

Hello: I have been unable to find the package "hardsuse" that is supposed to contain the script "harden_suse" in series "sec". I have looked on both the 7.1 and 7.2 cds, and on the SuSE ftp site (for 7.1). Can anybody tell me where else they might be? Also, is sftp, in package OpenSsh with 7.2, available in 7.1? I cannot find it there. (I want to get my new 7.2 installation up and running before I upgrade my 7.1 installation, but need to transfer files between the two machines securely.) Thanks in advance, George -- George H. Griffin Powered by SuSE Linux 7.1, kernel 2.4.2 "Always believe your observations, not your theories (no matter how near they may be to your heart) if the two are in conflict!" John Gribbin

4 3

[SLE] Fdd Tape drive
by sales＠itosn.com 28 Mar '01

28 Mar '01

Hello everyone, Am trying to run a Colorado T1000 Tape drive on FDD controller with Suse V6.4. Have got the following from the /var/log/messages file. It seems to find the drive and say it can't find it. When I try 'mt -f /dev/nqft0 rewind' it says 'no such device. Any ideas, anyone? > Jul 31 10:18:26 andy kernel: ftape v3.04d 25/11/97 > Jul 31 10:18:26 andy kernel: (c) 1993-1996 Bas Laarhoven (bas(a)vimec.nl) > Jul 31 10:18:26 andy kernel: (c) 1995-1996 Kai Harrekilde-Petersen (khp(a)dolphinics.no) > Jul 31 10:18:26 andy kernel: (c) 1996-1997 Claus-Justus Heine (claus(a)momo.math.rwth-aachen.de) > Jul 31 10:18:26 andy kernel: QIC-117 driver for QIC-40/80/3010/3020 floppy tape drives > Jul 31 10:18:26 andy kernel: Compiled for Linux version 2.2.14 > Jul 31 10:18:26 andy kernel: [000] ftape-init.c (ftape_init) - installing QIC-117 floppy tape hardware drive ... . > Jul 31 10:18:26 andy kernel: [001] ftape-init.c (ftape_init) - ftape_init @ 0xcc87f04c. > Jul 31 10:18:26 andy kernel: [002] ftape-buffer.c (add_one_buffer) - buffer nr #1 @ c98557a0, dma area @ c0290000. > Jul 31 10:18:26 andy kernel: [003] ftape-buffer.c (add_one_buffer) - buffer nr #2 @ cb28d3e0, dma area @ c0008000. > Jul 31 10:18:26 andy kernel: [004] ftape-buffer.c (add_one_buffer) - buffer nr #3 @ cb28d200, dma area @ c04b8000. > Jul 31 10:18:26 andy kernel: [005] ftape-calibr.c (time_inb) - inb() duration: 637 nsec. > Jul 31 10:18:26 andy kernel: [006] ftape-calibr.c (ftape_calibrate) - TC for `ftape_udelay()' = 484 nsec (at 20479 counts). > Jul 31 10:18:26 andy kernel: [007] ftape-calibr.c (ftape_calibrate) - TC for `fdc_wait()' = 1771 nsec (at 5119 counts). > Jul 31 10:18:26 andy kernel: zftape for ftape v3.04d 25/11/97 > Jul 31 10:18:26 andy kernel: (c) 1996, 1997 Claus-Justus Heine (claus(a)momo.math.rwth-aachen.de) > Jul 31 10:18:26 andy kernel: vfs interface for ftape floppy tape driver. > Jul 31 10:18:26 andy kernel: Support for QIC-113 compatible volume table, dynamic memory allocation > Jul 31 10:18:26 andy kernel: and builtin compression (lzrw3 algorithm). > Jul 31 10:18:26 andy kernel: Compiled for Linux version 2.2.14 > Jul 31 10:18:26 andy kernel: [008] zftape-init.c (zft_init) - zft_init @ 0xcc8a6534. > Jul 31 10:18:26 andy kernel: [009] zftape-init.c (zft_init) - installing zftape VFS interface for ftape driver .... > Jul 31 10:18:26 andy kernel: [010] fdc-io.c (fdc_config) - fdc base: 0x3f0, irq: 6, dma: 2. > Jul 31 10:18:26 andy kernel: [011] fdc-io.c (fdc_probe) - Type 82077AA FDC found. > Jul 31 10:18:32 andy kernel: [012] ftape-ctl.c (ftape_activate_drive) - no tape drive found !. > Jul 31 10:18:32 andy kernel: [013] ftape-ctl.c (ftape_enable) - ftape_activate_drive(&ftape_status.fti_drive_type) failed: -19. > Jul 31 10:18:32 andy kernel: [014] zftape-ctl.c (_zft_open) - ftape_enable failed: -19. > Jul 31 10:18:32 andy kernel: [015] zftape-init.c (zft_open) - _ftape_open failed. -- Reply to sales(a)itosn.com Mail to other addresses is forwarded -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/support/faq

10 9

redhat vs suse
by faisal 09 Mar '01

09 Mar '01

Hello i am a user of redhat linux waiting for the suse linux 7.1 iso image to be available so that i could get it .. i was thinking what are the benifits i will have when i install suse on my workstation ? *º¤., ¸¸,.¤º*¨¨¨*¤Allah Hafiz*º¤., ¸¸,.¤º*¨¨*¤ *º¤., ¸¸,.¤º*¨¨¨*Faisal Gillani *º¤., ¸¸,.¤º*¨¨*¤ *º¤., ¸¸,.¤º*¨¨¨*¤Allah Hafiz*º¤., ¸¸,.¤º*¨¨*¤ *º¤., ¸¸,.¤º*¨¨¨*Faisal Gillani *º¤., ¸¸,.¤º*¨¨*¤ _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

18 32

New suse 7.1 proffesional
by faisal 17 Feb '01

17 Feb '01

Hey i am a user of redhat linux but have heard so much about suse wana check it out the new 7.1 version any idea where i can find its ISO image thanks a lot *º¤., ¸¸,.¤º*¨¨¨*¤Allah Hafiz*º¤., ¸¸,.¤º*¨¨*¤ *º¤., ¸¸,.¤º*¨¨¨*Faisal Gillani *º¤., ¸¸,.¤º*¨¨*¤

3 2

[SLE] printing in colour or color
by peter＠hargroves.screaming.net 07 Jan '01

07 Jan '01

Hello all readers, I have a epson stylus color 440 printer. I can print ok in Black but not in color any help appreciated. I'm using Suse 6.2 Peter -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 2

[SLE] those with modem issues
by landie＠concentric.net 21 Oct '00

21 Oct '00

http://www.linuxlookup.com/html/guides/ppp-wvdial.html#2 -- Rolando Roman icq 3783184 -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 2

RE: [SLE] Netscape 6pr3 = wow.
by kester.clegg＠comreco-rail.co.uk 06 Oct '00

06 Oct '00

it certainly should take middle mouse button copy & pastes, because that's an X protocol, and doesn't require KDE or anything else... > > Greek Geek :-) > > > Hmmm, it did not take the cut&paste from WordPerfect 8 (Personal > Edition), for Linux, or KDE's simple editor or WordPerfect 9-from Office > 2000. Grumble.... Is it me or it??? But it did it stably :-^ -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/support/faq

2 1

RE: [SLE] 6.4 > Routing Problems?
by kester.clegg＠comreco-rail.co.uk 21 Sep '00

21 Sep '00

I could be wildy wrong, but doesn't /etc/resolv.conf need to have IP addresses in it even if it accesses the net via another machine? Maybe you forgot it? Just a hopeful guess... On Thursday, September 21, 2000 9:41 AM, Lee Smallbone [SMTP:lee@smallbone.com] wrote: > Hi there, > > Having bought SuSE 6.4 about 3 months ago I finally freed up the > machine I have been waiting to install it on. The installation went > relatively smoothly. I have got it to recognize my network card and > traffic flows freely within the LAN. > > However: As soon as I try to access the Internet with the machine, it > complains Network Unreachable (if using ping for instance.) I've set > the default gateway to 192.168.1.1, which is the other SuSE (6.0) > machine that does the dialing and the NAT'ing. Every other machine > (Win9x) can access the Internet ok, so I know it's a problem with the > SuSE 6.4 machine. As I say I can ping and telnet (where applicable) > any machine on the local network, just I can't seem to reach ANYWHERE > on the Internet, even whilst using IP addresses. > > What am I doing wrong? > > > Best regards, > Lee Smallbone > lee(a)smallbone.com > > > > -- > To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com > For additional commands send e-mail to suse-linux-e-help(a)suse.com > Also check the FAQ at http://www.suse.com/support/faq -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/support/faq

4 3