Ich stehe vor einem Rätsel:
Ich habe den Kernel von linux-2.4.4.SuSE auf linux-2.4.10.SuSE umgestellt, da
ein Grafiktablett diesen Kernel verlangt.
Leider ist dadurch jetzt die vorher funktionierende SCSI-Emulation verloren
gegangen. Ich weiss nur nicht wo. Der physikalische SCSI-Controler wird
geladen und funktioniert. Die IDE-Emulation lädt zwar das Kernelmodul, aber
die Laufwerke bleiben IDE. auch mit cdrecord -scanbus wird nur ein SCSI-Bus
angezeigt.
Hat irgendwer so ein Problem schon gelöst?
Danke,
Markus
Auszüge der Konfiguration.
/etc/lilo.conf enthält die Zeile:
append = "scsi-ide=hdc"
/etc/init.d/boot.local die Zeile
/sbin/modprobe ide-scsi
Das Kernelmodul wird zwar geladen, aber die Laufwerke bleiben IDE.
Auszug aus der /var/log/boot.msg:
Inspecting /boot/System.map
Loaded 12163 symbols from /boot/System.map.
Symbols match kernel version 2.4.10.
Loaded 173 symbols from 9 modules.
klogd 1.3-3, log source = ksyslog started.
<4>Linux version 2.4.10-4GB (root@linux) (gcc version 2.95.3 20010315 (SuSE))
#1 Sat Nov 3 12:01:19 MST 2001
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
<4> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
<4> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<4>On node 0 totalpages: 131056
<4>zone(0): 4096 pages.
<4>zone(1): 126960 pages.
<4>zone(2): 0 pages.
<4>Local APIC disabled by BIOS -- reenabling.
<4>Found and enabled local APIC!
<4>Kernel command line: auto BOOT_IMAGE=win4lin ro root=347
BOOT_FILE=/boot/win4lin scsi-ide=hdc
<6>Initializing CPU#0
<4>Detected 1000.033 MHz processor.
.....<5>RAMDISK: Compressed image found at block 0
<4>Uncompressing...................................done.
<4>Freeing initrd memory: 529k freed
<4>VFS: Mounted root (ext2 filesystem).
<6>DC395x (TRM-S1040) SCSI driver 1.32, 2000-12-02
<6>PCI: Found IRQ 11 for device 00:09.0
<6>PCI: Sharing IRQ 11 with 00:0d.0
<6>PCI: Sharing IRQ 11 with 00:0d.1
<6>DC395x: Used settings: AdapterID=07, Speed=0(20.0MHz), DevMode=0x77
<6>DC395x: AdaptMode=0x0f, Tags=4(16), DelayReset=1s
<4>DC395 : Connectors: Termination: Auto Low High
<6>DC395x (TRM-S1040): 1 adapters found
<4>spurious 8259A interrupt: IRQ7.
<6>scsi0 : Tekram DC395U/UW/F DC315/U V1.32, 2000-12-02
<4> Vendor: IOMEGA Model: ZIP 100 Rev: N*32
<4> Type: Direct-Access ANSI SCSI revision: 02
<4> Vendor: SCANNER Model: Rev: 2.00
<4> Type: Scanner ANSI SCSI revision: 01 CCS
<4>Attached scsi removable disk sda at scsi0, channel 0, id 5, lun 0
<4>sda : READ CAPACITY failed.
<4>sda : status = 1, message = 00, host = 0, driver = 28
<4>Current sd00:00: sns = 70 2
<4>ASC=3a ASCQ= 0
<4>Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x11 0x00 0x00 0x00 0x00
0x3a 0x00 0x00 0x00 0x00 0x00 0x1f 0xf0 0x01 0x1f 0xf0 0x00 0x00
<4>sda : block size assumed to be 512 bytes, disk size 1GB.
<6> sda: I/O error: dev 08:00, sector 0
<4> unable to read partition table
<4>FAT: bogus logical sector size 0
<4>FAT: bogus logical sector size 0
<4>reiserfs: checking transaction log (device 03:47) ...
<4>Using r5 hash to sort names
<4>reiserfs: using 3.5.x disk format
<4>ReiserFS version 3.6.25
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<4>change_root: old root has d_count=2
<5>Trying to unmount old root ... okay
<4>Freeing unused kernel memory: 124k freed
<6>LVM version 1.0.1-rc2(30/08/2001) module loaded
<6>Device not ready. Make sure there is a disc in the drive.
<7>VFS: Disk change detected on device sd(8,0)
<4>sda : READ CAPACITY failed.
<4>sda : status = 1, message = 00, host = 0, driver = 28
<4>Current sd00:00: sns = 70 2
<4>ASC=3a ASCQ= 0
<4>Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x11 0x00 0x00 0x00 0x00
0x3a 0x00 0x00 0x00 0x00 0x00 0x1f 0xf0 0x01 0x1f 0xf0 0x00 0x00
<4>sda : block size assumed to be 512 bytes, disk size 1GB.
<6> sda: I/O error: dev 08:00, sector 0
<4> unable to read partition table
<6>Adding Swap: 530104k swap-space (priority 42)
<4>reiserfs: checking transaction log (device 03:48) ...
<4>Using r5 hash to sort names
<4>reiserfs: using 3.5.x disk format
<4>ReiserFS version 3.6.25
<4>MSDOS FS: IO charset iso8859-1
<4>MSDOS FS: IO charset iso8859-1
<6>scsi1 : SCSI host adapter emulation for IDE ATAPI devices
<6>usb.c: registered new driver usbdevfs
<6>usb.c: registered new driver hub
<6>usb.c: registered new driver aiptek
<6>aiptek.c: v0.1 Chris Atenasio