Hallo Herr Diehl, vielen Dank für die Antwort. Die Antwort hane unter die jeweilige Zeile kopiert. Mit freundlichen Grüßen, Peter Am Freitag, 28. Januar 2011, 09:32:41 schrieb Heinz Diehl:
On 28.01.2011, PAP wrote:
FATAL: Error inserting fcpci (/lib/modules/2.6.34.7-0.7-xen/updates/fcpci.ko): Device or resource busy
Kannst du bitte mal die Ausgabe von "lspci -v" posten?
linux-1:~ # lspci -v 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a4) Subsystem: Dell PowerEdge T105 Memory Controller Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed- 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev f1) Subsystem: Dell PowerEdge T105 ISA Bridge Flags: bus master, 66MHz, fast devsel, latency 0 I/O ports at 8c00 [size=1K] 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2) Subsystem: Dell PowerEdge T105 SMBus Flags: 66MHz, fast devsel, IRQ 10 I/O ports at 2080 [size=32] I/O ports at 2040 [size=64] I/O ports at 2000 [size=64] Capabilities: [44] Power Management version 2 Kernel driver in use: nForce2_smbus 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Dell PowerEdge T105 onboard USB Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at d0000000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a4) (prog-if 20 [EHCI]) Subsystem: Dell PowerEdge T105 onboard USB Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at d0001000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO]) Subsystem: Dell PowerEdge T105 Serial ATA Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 20f0 [size=8] I/O ports at 20e0 [size=4] I/O ports at 20d0 [size=8] I/O ports at 20c0 [size=4] I/O ports at 20b0 [size=16] Memory at d0002000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: sata_nv 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO]) Subsystem: Dell PowerEdge T105 Serial ATA Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 I/O ports at 2440 [size=8] I/O ports at 2430 [size=4] I/O ports at 2420 [size=8] I/O ports at 2410 [size=4] I/O ports at 2400 [size=16] Memory at d0003000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: sata_nv 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev f2) (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00003000-00003fff Memory behind bridge: d0100000-d01fffff Prefetchable memory behind bridge: d8000000-dfffffff 00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3) (prog-if 00linux-1:~ # lspci -v 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a4) Subsystem: Dell PowerEdge T105 Memory Controller Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed- 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev f1) Subsystem: Dell PowerEdge T105 ISA Bridge Flags: bus master, 66MHz, fast devsel, latency 0 I/O ports at 8c00 [size=1K] 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2) Subsystem: Dell PowerEdge T105 SMBus Flags: 66MHz, fast devsel, IRQ 10 I/O ports at 2080 [size=32] I/O ports at 2040 [size=64] I/O ports at 2000 [size=64] Capabilities: [44] Power Management version 2 Kernel driver in use: nForce2_smbus 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Dell PowerEdge T105 onboard USB Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at d0000000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a4) (prog-if 20 [EHCI]) Subsystem: Dell PowerEdge T105 onboard USB Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at d0001000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO]) Subsystem: Dell PowerEdge T105 Serial ATA Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 20f0 [size=8] I/O ports at 20e0 [size=4] I/O ports at 20d0 [size=8] I/O ports at 20c0 [size=4] I/O ports at 20b0 [size=16] Memory at d0002000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: sata_nv 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO]) Subsystem: Dell PowerEdge T105 Serial ATA Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 I/O ports at 2440 [size=8] I/O ports at 2430 [size=4] I/O ports at 2420 [size=8] I/O ports at 2410 [size=4] I/O ports at 2400 [size=16] Memory at d0003000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: sata_nv 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev f2) (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00003000-00003fff Memory behind bridge: d0100000-d01fffff Prefetchable memory behind bridge: d8000000-dfffffff 00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: d0200000-d02fffff Capabilities: [40] Power Management version 2 Capabilities: [48] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [58] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [160] Advanced Error Reporting Kernel driver in use: pcieport 00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Capabilities: [40] Power Management version 2 Capabilities: [48] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [58] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [160] Advanced Error Reporting Kernel driver in use: pcieport 00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Capabilities: [40] Power Management version 2 Capabilities: [48] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [58] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [160] Advanced Error Reporting Kernel driver in use: pcieport 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Capabilities: [40] Power Management version 2 Capabilities: [48] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [58] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [160] Advanced Error Reporting Kernel driver in use: pcieport 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp 01:07.0 Network controller: AVM GmbH Fritz!PCI v2.0 ISDN (rev 01) Subsystem: AVM GmbH Fritz!PCI v2.0 ISDN Flags: medium devsel, IRQ 17 Memory at d0110000 (32-bit, non-prefetchable) [size=32] I/O ports at 3400 [size=32] Capabilities: [40] Power Management version 2 Kernel driver in use: fcpci 01:08.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) (prog- if 00 [VGA controller]) Subsystem: Dell PowerEdge T105 Embedded ATI ES1000 Flags: bus master, stepping, fast Back2Back, medium devsel, latency 66, IRQ 19 Memory at d8000000 (32-bit, prefetchable) [size=128M] I/O ports at 3000 [size=256] Memory at d0100000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at d0120000 [disabled] [size=128K] Capabilities: [50] Power Management version 2 Kernel driver in use: radeon 02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express Subsystem: Dell PowerEdge T105 Broadcom NetXtreme 5722 Flags: bus master, fast devsel, latency 0, IRQ 419 Memory at d0200000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: [48] Power Management version 3 Capabilities: [50] Vital Product Data Capabilities: [58] Vendor Specific Information: Len=78 <?> Capabilities: [e8] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 00-1e-c9-ff-fe-28-99-37 Capabilities: [16c] Power Budgeting <?> Kernel driver in use: tg3 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: d0200000-d02fffff Capabilities: [40] Power Management version 2 Capabilities: [48] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [58] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [160] Advanced Error Reporting Kernel driver in use: pcieport 00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Capabilities: [40] Power Management version 2 Capabilities: [48] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [58] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [160] Advanced Error Reporting Kernel driver in use: pcieport 00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Capabilities: [40] Power Management version 2 Capabilities: [48] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [58] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [160] Advanced Error Reporting Kernel driver in use: pcieport 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Capabilities: [40] Power Management version 2 Capabilities: [48] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [58] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [160] Advanced Error Reporting Kernel driver in use: pcieport 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp 01:07.0 Network controller: AVM GmbH Fritz!PCI v2.0 ISDN (rev 01) Subsystem: AVM GmbH Fritz!PCI v2.0 ISDN Flags: medium devsel, IRQ 17 Memory at d0110000 (32-bit, non-prefetchable) [size=32] I/O ports at 3400 [size=32] Capabilities: [40] Power Management version 2 Kernel driver in use: fcpci 01:08.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) (prog- if 00 [VGA controller]) Subsystem: Dell PowerEdge T105 Embedded ATI ES1000 Flags: bus master, stepping, fast Back2Back, medium devsel, latency 66, IRQ 19 Memory at d8000000 (32-bit, prefetchable) [size=128M] I/O ports at 3000 [size=256] Memory at d0100000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at d0120000 [disabled] [size=128K] Capabilities: [50] Power Management version 2 Kernel driver in use: radeon 02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express Subsystem: Dell PowerEdge T105 Broadcom NetXtreme 5722 Flags: bus master, fast devsel, latency 0, IRQ 419 Memory at d0200000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: [48] Power Management version 3 Capabilities: [50] Vital Product Data Capabilities: [58] Vendor Specific Information: Len=78 <?> Capabilities: [e8] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 00-1e-c9-ff-fe-28-99-37 Capabilities: [16c] Power Budgeting <?> Kernel driver in use: tg3
Und bitte auch den fuer die Karte relevanten Abschnitt aus der Ausgabe von "dmesg".
.0-4/input0 [ 2.731627] usbcore: registered new interface driver usbhid [ 2.731629] usbhid: USB HID core driver [ 2.761656] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 3.016024] usb 2-7: new low speed USB device using ohci_hcd and address 3 [ 3.219038] usb 2-7: New USB device found, idVendor=062a, idProduct=0000 [ 3.219041] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.228314] input: HID 062a:0000 as /devices/pci0000:00/0000:00:02.0/usb2/2-7/2-7:1.0/input/input1 [ 3.228380] generic-usb 0003:062A:0000.0002: input,hidraw1: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:02.0-7/input0 [ 4.809755] udev: starting version 157 [ 4.959911] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 4.962569] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.106540] i2c i2c-1: nForce2 SMBus adapter at 0x2040 [ 5.106555] i2c i2c-2: nForce2 SMBus adapter at 0x2000 [ 5.108497] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 5.108543] ACPI: Power Button [PWRB] [ 5.108619] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 5.108644] ACPI: Power Button [PWRF] [ 5.128047] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.128084] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 5.128113] scsi 2:0:0:0: Attached scsi generic sg2 type 5 [ 5.174557] sr0: scsi3-mmc drive: 8x/48x writer cd/rw xa/form2 cdda tray [ 5.174561] Uniform CD-ROM driver Revision: 3.20 [ 5.174668] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 5.273621] Modular ISDN core version 1.1.21 [ 5.273710] NET: Registered protocol family 34 [ 5.315219] tg3.c:v3.108 (February 17, 2010) [ 5.315700] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 5.316702] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 5.318172] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 18 [ 5.318178] alloc irq_desc for 18 on node -1 [ 5.318180] alloc kstat_irqs on node -1 [ 5.318197] tg3 0000:02:00.0: PCI INT A -> Link[LNK2] -> GSI 18 (level, low) -> IRQ 18 [ 5.318209] tg3 0000:02:00.0: setting latency timer to 64 [ 5.338097] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 5.338252] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 5.338930] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95722) rev a200] (PCI Express) MAC address 00:1e:c9:28:99:37 [ 5.338936] tg3 0000:02:00.0: eth0: attached PHY is 5722/5756 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 5.338939] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 5.338942] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 5.347705] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 5.350536] mISDNipac module version 2.0 [ 5.365556] AVM Fritz PCI driver Rev. 2.1 [ 5.366174] ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 17 [ 5.366180] alloc irq_desc for 17 on node -1 [ 5.366182] alloc kstat_irqs on node -1 [ 5.366194] fcpci 0000:01:07.0: PCI INT A -> Link[LNK4] -> GSI 17 (level, low) -> IRQ 17 [ 5.366197] mISDN: found adapter Fritz!Card PCI v2 at 0000:01:07.0 [ 5.366208] AVM.1: AVM Fritz!CARD PCIv2 config irq:17 base:0x3400 [ 5.388032] AVM 1 cards installed DEBUG [ 5.533992] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 6.402395] Adding 6072564k swap on /dev/sda3. Priority:-1 extents:1 across:6072564k [ 6.650816] device-mapper: uevent: version 1.0.3 [ 6.651014] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 7.404699] loop: module loaded [ 7.650523] EXT4-fs (sda9): mounted filesystem with ordered data mode [ 7.716310] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 7.761698] EXT4-fs (sda8): mounted filesystem with ordered data mode [ 7.814978] EXT4-fs (sda7): mounted filesystem with ordered data mode [ 10.009071] type=1505 audit(1296197342.217:2): operation="profile_load" pid=1163 name=/bin/ping [ 10.065247] type=1505 audit(1296197342.274:3): operation="profile_load" pid=1167 name=/sbin/klogd [ 10.173741] type=1505 audit(1296197342.381:4): operation="profile_load" pid=1168 name=/sbin/syslog-ng [ 10.281297] type=1505 audit(1296197342.490:5): operation="profile_load" pid=1169 name=/sbin/syslogd [ 10.397635] type=1505 audit(1296197342.605:6): operation="profile_load" pid=1170 name=/usr/sbin/avahi-daemon [ 10.494982] type=1505 audit(1296197342.702:7): operation="profile_load" pid=1171 name=/usr/sbin/identd [ 10.602638] type=1505 audit(1296197342.809:8): operation="profile_load" pid=1172 name=/usr/sbin/mdnsd [ 10.727924] type=1505 audit(1296197342.934:9): operation="profile_load" pid=1173 name=/usr/sbin/nscd [ 10.898438] type=1505 audit(1296197343.105:10): operation="profile_load" pid=1174 name=/usr/sbin/ntpd [ 11.014949] type=1505 audit(1296197343.222:11): operation="profile_load" pid=1175 name=/usr/sbin/traceroute [ 11.791461] CAPI 2.0 started up with major 68 (middleware+capifs) [ 18.258476] type=1503 audit(1296197350.465:12): operation="change_hat" info="unconfined" error=-1 pid=1673 [ 18.258498] type=1503 audit(1296197350.465:13): operation="change_hat" info="unconfined" error=-1 pid=1673 [ 22.761726] fcpci: module license 'Proprietary' taints kernel. [ 22.761732] Disabling lock debugging due to kernel taint [ 22.766161] fcpci: AVM FRITZ!Card PCI driver, revision 0.7.2 [ 22.766164] fcpci: (fcpci built on Jan 10 2011 at 12:18:45) [ 22.766165] fcpci: -- 64 bit CAPI driver -- [ 22.766171] Error: Driver 'fcpci' is already registered, aborting... [ 22.891705] fcpci: AVM FRITZ!Card PCI driver, revision 0.7.2 [ 22.891709] fcpci: (fcpci built on Jan 10 2011 at 12:18:45) [ 22.891711] fcpci: -- 64 bit CAPI driver -- [ 22.891716] Error: Driver 'fcpci' is already registered, aborting... [ 23.036445] ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded [ 25.407047] Bridge firewalling registered [ 25.420385] alloc irq_desc for 419 on node 0 [ 25.420389] alloc kstat_irqs on node 0 [ 25.420394] tg3 0000:02:00.0: irq 419 (275) for MSI/MSI-X [ 25.453477] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 25.455757] device eth0 entered promiscuous mode [ 27.121801] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex [ 27.121805] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX [ 27.122170] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 27.122214] br0: port 1(eth0) entering forwarding state [ 29.569933] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found [ 32.371850] Event-channel device installed. [ 33.045302] usbcore: registered new interface driver usbback [ 35.740013] br0: no IPv6 routers present [ 37.812012] eth0: no IPv6 routers present [ 40.329645] alloc irq_desc for 428 on node 0 [ 40.329648] alloc kstat_irqs on node 0 [ 40.329690] alloc irq_desc for 429 on node 0 [ 40.329691] alloc kstat_irqs on node 0 [ 40.329731] alloc irq_desc for 430 on node 0 [ 40.329733] alloc kstat_irqs on node 0 [ 40.338233] alloc irq_desc for 431 on node 0 [ 40.338236] alloc kstat_irqs on node 0 [ 40.338262] suspend: event channel 24 [ 125.235627] fcpci: AVM FRITZ!Card PCI driver, revision 0.7.2 [ 125.235632] fcpci: (fcpci built on Jan 10 2011 at 12:18:45) [ 125.235634] fcpci: -- 64 bit CAPI driver -- [ 125.235639] Error: Driver 'fcpci' is already registered, aborting... -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org