Hallo Ingo Hallo Liste Am Donnerstag, 21. August 2003 10:14 schrieb Ingo Göppert:
Läuft er auch nach dem Booten "rcsmpppd status"? Was sagt den "id" wenn du dich angemeldet hast?
Als Anfänger weiß ich nicht was damit gemeint ist
Einfach mit dem YaST2 Runlevel Editor oder mit insserv den smpppd aktivieren. das ist auf ja im Runlevel Editor Level ist 2 3 5 was der Buchstabe B in dieser Zeile aussagt weiß ich noch nicht (ist nicht angekreuzt)
Keine Ahnung warum, aber vielleicht wird der smpppd bei dir zum falschen Zeitpunkt oder mit Fehlermeldungen gestartet. Poste mal deine /var/log/boot.msg HIER IST DIE BOOT:MSG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Inspecting /boot/System.map-2.4.20-4GB-athlon Loaded 20860 symbols from /boot/System.map-2.4.20-4GB-athlon. Symbols match kernel version 2.4.20. Loaded 311 symbols from 29 modules. klogd 1.4.1, log source = ksyslog started. <4>Linux version 2.4.20-4GB-athlon (root@Athlon.suse.de) (gcc version 3.3 20030226 (prerelease) (SuSE Linux)) #1 Fri Jul 11 20:16:51 UTC 2003 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000005fff0000 (usable) <4> BIOS-e820: 000000005fff0000 - 000000005fff8000 (ACPI data) <4> BIOS-e820: 000000005fff8000 - 0000000060000000 (ACPI NVS) <4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) <5>639MB HIGHMEM available. <5>896MB LOWMEM available. <7>ACPI: have wakeup address 0xc0001000 <4>On node 0 totalpages: 393200 <4>zone(0): 4096 pages. <4>zone(1): 225280 pages. <4>zone(2): 163824 pages. <6>ACPI: RSDP (v000 AMI ) @ 0x000fa900 <6>ACPI: RSDT (v001 AMIINT VIA_K7 00000.00016) @ 0x5fff0000 <6>ACPI: FADT (v001 AMIINT VIA_K7 00000.00017) @ 0x5fff0030 <6>ACPI: MADT (v001 AMIINT VIA_K7 00000.00009) @ 0x5fff00c0 <6>ACPI: DSDT (v001 VIA VIA_K7 00000.04096) @ 0x00000000 <5>ACPI: BIOS passes blacklist <4>Building zonelist for node : 0 <4>Kernel command line: root=/dev/hdd3 vga=0x31a hdc=ide-scsi hdclun=0 splash=silent splash=silent <6>ide_setup: hdc=ide-scsi <6>ide_setup: hdclun=0 <6>bootsplash: silent mode. <6>bootsplash: silent mode. <6>Initializing CPU#0 <4>Detected 1733.448 MHz processor. <4>Console: colour dummy device 80x25 <4>Calibrating delay loop... 3460.30 BogoMIPS <6>Memory: 1550416k/1572800k available (1697k kernel code, 21996k reserved, 572k data, 172k init, 655296k highmem) <6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) <6>Inode cache hash table entries: 131072 (order: 8, 1048576 bytes) <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes) <4>Buffer-cache hash table entries: 131072 (order: 7, 524288 bytes) <4>Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <6>CPU: L2 Cache: 256K (64 bytes/line) <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000 <7>CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000 <4>CPU: AMD Athlon(tm) XP 2100+ stepping 02 <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) <4>mtrr: detected mtrr type: Intel <6>ACPI: Subsystem revision 20030228 <6>PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1 <6>PCI: Using configuration type 1 <6>ACPI: Interpreter enabled <6>ACPI: Using PIC for interrupt routing <6>ACPI: System [ACPI] (supports S0 S1 S3 S4 S5) <6>ACPI: PCI Root Bridge [PCI0] (00:00) <4>PCI: Probing PCI hardware (bus 00) <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <6>ACPI: Power Resource [URP1] (off) <6>ACPI: Power Resource [URP2] (off) <6>ACPI: Power Resource [FDDP] (off) <6>ACPI: Power Resource [LPTP] (off) <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) <6>PCI: Probing PCI hardware <4>PCI: No IRQ known for interrupt pin A of device 00:11.1 - using IRQ 255 <6>PCI: Using ACPI for IRQ routing <6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>apm: BIOS not found. <4>Starting kswapd <4>bigpage subsystem: allocated 0 bigpages (=0MB). <4>allocated 32 pages and 32 bhs reserved for the highmem bounces <4>kinoded started <5>VFS: Disk quotas vdquot_6.5.1 <5>aio_setup: num_physpages = 98300 <5>aio_setup: sizeof(struct page) = 48 <6>vesafb: framebuffer at 0xd0000000, mapped to 0xf8814000, size 65536k <6>vesafb: mode is 1280x1024x16, linelength=2560, pages=24 <6>vesafb: protected mode interface info at c000:55b0 <6>vesafb: scrolling: redraw <6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 <6>Looking for splash picture.... silenjpeg size 43799 bytes, found (1280x1024, 32818 bytes, v3). <6>Got silent jpeg. <6>Got silent jpeg. <4>Console: switching to colour frame buffer device 148x51 <6>fb0: VESA VGA frame buffer device <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>ttyS01 at 0x02f8 (irq = 3) is a 16550A <6>Real Time Clock Driver v1.10e <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>loop: loaded (max 16 devices) <6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>VP_IDE: IDE controller at PCI slot 00:11.1 <4>PCI: No IRQ known for interrupt pin A of device 00:11.1 - using IRQ 255 <6>VP_IDE: chipset revision 6 <6>VP_IDE: not 100%% native mode: will probe irqs later <6>VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1 <6> ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA <6> ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA <4>hda: Maxtor 6Y120L0, ATA DISK drive <4>hdb: Memorex DVD-MAXX 1648 AJ, ATAPI CD/DVD-ROM drive <4>blk: queue c03cae80, I/O limit 4095Mb (mask 0xffffffff) <4>hdc: AOPEN CD-RW CRW2440, ATAPI CD/DVD-ROM drive <4>hdd: WDC WD450AA-00BAA0, ATA DISK drive <4>blk: queue c03cb454, I/O limit 4095Mb (mask 0xffffffff) <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <4>hda: attached ide-disk driver. <4>hda: host protected area => 1 <6>hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=14946/255/63, UDMA(133) <4>hdd: attached ide-disk driver. <4>hdd: host protected area => 1 <6>hdd: 87930864 sectors (45021 MB) w/2048KiB Cache, CHS=87233/16/63, UDMA(66) <4>ide-floppy driver 0.99.newide <6>Partition check: <6> hda: hda1 hda2 < hda5 hda6 > <6> hdd:<6> [PTBL] [5473/255/63] hdd1 hdd2 hdd3 <4>ide-floppy driver 0.99.newide <6>SCSI subsystem driver Revision: 1.00 <3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 <6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <6>IP: routing cache hash table of 16384 buckets, 128Kbytes <6>TCP: Hash tables configured (established 524288 bind 65536) <6>Linux IP multicast router 0.06 plus PIM-SM <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <5>RAMDISK: Compressed image found at block 0 <6>Freeing initrd memory: 498k freed <4>VFS: Mounted root (ext2 filesystem). <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (ide1(22,67)) for (ide1(22,67)) <4>Using r5 hash to sort names <4>VFS: Mounted root (reiserfs filesystem) readonly. <5>Trying to move old root to /initrd ... failed <5>Unmounting old root <5>Trying to free ramdisk memory ... okay <6>Freeing unused kernel memory: 172k freed <5>CAPI-driver Rev 1.1.4.1: loaded <5>capifs: Rev 1.1.4.1 <5>capi20: started up with major 68 <5>kcapi: capi20 attached <5>capi20: Rev 1.1.4.2: started up with major 68 (middleware+capifs) <6>CSLIP: code copyright 1989 Regents of the University of California <5>ISDN subsystem Rev: 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded <5>kcapi: capidrv attached <6>kcapi: appl 1 up <5>capidrv: Rev 1.1.4.1: loaded <6>fcpci: AVM FRITZ!Card PCI driver, revision 0.4 <6>fcpci: (fcpci built on Jul 11 2003 at 21:19:45) <6>fcpci: Loading... <6>fcpci: Driver 'fcpci' attached to stack <5>kcapi: driver fcpci attached <6>fcpci: Auto-attaching... <6>fcpci: Stack version 3.10-02 <5>kcapi: Controller 1: fritz-pci attached <5>kcapi: card 1 "fritz-pci" ready. <6>fcpci: Loaded. <5>kcapi: notify up contr 1 <6>capidrv: controller 1 up <6>capidrv-1: now up (2 B channels) <6>capidrv-1: D2 trace enabled <6>capi: controller 1 up <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>LVM version 1.0.5+(mp-v6a)(22/07/2002) module loaded <6>Adding Swap: 1052248k swap-space (priority 42) <4>MSDOS FS: IO charset iso8859-1 <4>MSDOS FS: IO charset iso8859-1 <4>MSDOS FS: IO charset iso8859-1 <4>MSDOS FS: IO charset iso8859-1 <4>hdb: attached ide-cdrom driver. <4>hdb: ATAPI 48X DVD-ROM drive, 512kB Cache <6>Uniform CD-ROM driver Revision: 3.12 <4>hdc: attached ide-scsi driver. <6>scsi0 : SCSI host adapter emulation for IDE ATAPI devices <4> Vendor: AOPEN Model: CD-RW CRW2440 Rev: 1.00 <4> Type: CD-ROM ANSI SCSI revision: 02 <6>ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker <6> http://www.scyld.com/network/ne2k-pci.html <4>eth0: RealTek RTL-8029 found at 0xe800, IRQ 10, 00:E0:7D:7C:58:3D. <7>ippp, open, slot: 0, minor: 0, state: 0000 <7>ippp_ccp: allocated reset data structure c3119000 <7>ippp, open, slot: 1, minor: 1, state: 0000 <7>ippp_ccp: allocated reset data structure c3119800 <6>i2c-core.o: i2c core module version 2.7.0 (20021208) <6>Linux video capture interface: v1.00 Kernel logging (ksyslog) stopped. Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Fri Aug 22 04:00:55 2003 Setting up ISDN card contr0 AVM FRITZ!PCI done Loading Driver contr0 1 kcapi capi capidrv done Initializing capi for contr0 (1)/etc/init.d/boot.d/S01isdn: line 84: /var/run/isdnlog.contr0.0: Read-only file system done Configuring serial ports... ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A modprobe: modprobe: Can't locate module char-major-212 Configured serial ports doneRun file system check on root for LVM activation doneRemounting root file system (/) read/write for vgscan... Scanning for LVM volume groups... vgscan -- reading all physical volumes (this may take a while...) vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created vgscan -- WARNING: This program does not do a VGDA backup of your volume group Activating LVM volume groups... vgchange -- no volume groups found done Activating swap-devices in /etc/fstab... doneChecking file systems... fsck 1.28 (31-Aug-2002) Reiserfs super block in block 16 on 0x1643 of format 3.6 with standard journal Blocks (total/free): 7062575/6230552 by 4096 bytes Filesystem is clean doneMounting local file systems... proc on /proc type proc (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/hda1 on /windows/C type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,iocharset=iso8859-1,code=437) /dev/hdd1 on /windows/D type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,iocharset=iso8859-1,code=437) /dev/hda5 on /windows/E type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,iocharset=iso8859-1,code=437) /dev/hda6 on /windows/F type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,iocharset=iso8859-1,code=437) doneLoading required kernel modules doneRestore device permissions done Activating remaining swap-devices in /etc/fstab... doneMounting shared memory FS on /dev/shm done Setting up network interfaces: lo done eth0 IP/Netmask: 192.168.0.1 / 255.255.255.0 done ippp0 <notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console SHELL=/bin/sh TERM=linux progress=13 INIT_VERSION=sysvinit-2.82 RUN_FROM_RC=yes REDIRECT=/dev/tty1 COLUMNS=148 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts DO_CONFIRM= vga=0x31a RUNLEVEL=S PWD=/etc/sysconfig/network PREVLEVEL=N LINES=51 kscripts=45 SHLVL=4 HOME=/ sscripts=45 splash=silent _=/sbin/startproc DAEMON=/usr/sbin/smpppd ] done Setting up the CMOS clock done Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/dhcp/dev/log -a /var/lib/named/dev/log ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=15 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a DO_CONFIRM= RUNLEVEL=S PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 kscripts=45 splash=silent sscripts=45 _=/sbin/startproc DAEMON=/sbin/syslogd ] <notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=15 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a DO_CONFIRM= RUNLEVEL=S PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 kscripts=45 splash=silent sscripts=45 _=/sbin/startproc DAEMON=/sbin/klogd ] done Setting up timezone data done Starting DVB/lib/modules/2.4.20-4GB-athlon/dvb/dvb-ttpci.o: unresolved symbol input_register_device /lib/modules/2.4.20-4GB-athlon/dvb/dvb-ttpci.o: unresolved symbol input_unregister_device /lib/modules/2.4.20-4GB-athlon/dvb/dvb-ttpci.o: unresolved symbol input_event done Setting up hostname 'linux' done Setting up loopback interface done Enabling syn flood protection done Disabling IP forwarding done Creating /var/log/boot.msg done<notice>killproc: kill(29,29) Running /etc/init.d/boot.local done Boot logging started on /dev/tty1(/dev/console) at Fri Aug 22 02:01:06 2003 Master Resource Control: previous runlevel: N, switching to runlevel: 5 Starting Firewall Initialization (phase 1 of 3) <notice>killproc: kill(29,3) INIT: Entering runlevel: 5 <notice>/etc/init.d/rc5.d/S01SuSEfirewall2_init start done <notice>'/etc/init.d/rc5.d/S01SuSEfirewall2_init start' exits with status 0 <notice>/etc/init.d/rc5.d/S01alsasound start Starting sound driver: via8233 done Restoring the previous sound setting done <notice>'/etc/init.d/rc5.d/S01alsasound start' exits with status 0 <notice>/etc/init.d/rc5.d/S01atd start Starting service at daemon<notice>startproc: execve (/usr/sbin/atd) [ /usr/sbin/atd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=19 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/atd ] done <notice>'/etc/init.d/rc5.d/S01atd start' exits with status 0 <notice>/etc/init.d/rc5.d/S01fbset start <notice>'/etc/init.d/rc5.d/S01fbset start' exits with status 0 Setting up ISDN card contr0 AVM FRITZ!PCI in use<notice>/etc/init.d/rc5.d/S01isdn start done Loading Driver contr0 1 kcapi capi capidrv done Initializing capi for contr0 (1) done Initializing random number generator<notice>killproc: kill(574,1) <notice>'/etc/init.d/rc5.d/S01isdn start' exits with status 0 <notice>/etc/init.d/rc5.d/S01random start done Searching for unresolved configuration files done Please check the following files (see /var/adm/rpmconfigcheck): <notice>'/etc/init.d/rc5.d/S01random start' exits with status 0 <notice>/etc/init.d/rc5.d/S01rpmconfigcheck start /etc/mailman.mail-gid.rpmnew <notice>'/etc/init.d/rc5.d/S01rpmconfigcheck start' exits with status 0 <notice>/etc/init.d/rc5.d/S02kbd start Loading keymap qwertz/de-latin1-nodeadkeys.map.gz doneLoading compose table latin1.add done Loading console font lat9w-16.psfu doneLoading screenmap trivial doneSetting up console ttys done<notice>'/etc/init.d/rc5.d/S02kbd start' exits with status 0 <notice>/etc/init.d/rc5.d/S02splash start <notice>'/etc/init.d/rc5.d/S02splash start' exits with status 0 <notice>/etc/init.d/rc5.d/S06network start Setting up network interfaces: lo done eth0 IP/Netmask: 192.168.0.1 / 255.255.255.0 done ippp0 done Starting syslog services done Starting hotplugging services [<notice>'/etc/init.d/rc5.d/S06network start' exits with status 0 <notice>/etc/init.d/rc5.d/S07syslog start <notice>'/etc/init.d/rc5.d/S07syslog start' exits with status 0 <notice>/etc/init.d/rc5.d/S08hotplug start ieee1394 net pci usb .. ] done Starting DVB<notice>'/etc/init.d/rc5.d/S08hotplug start' exits with status 0 <notice>/etc/init.d/rc5.d/S09dvb start insmod: a module named dvb-core already exists /lib/modules/2.4.20-4GB-athlon/dvb/dvb-ttpci.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg insmod: a module named ves1820 already exists insmod: a module named alps_bsrv2 already exists insmod: a module named alps_tdlb7 already exists insmod: a module named alps_tdmb7 already exists insmod: a module named stv0299 already exists insmod: a module named grundig_29504-401 already exists insmod: a module named grundig_29504-491 already exists failed <notice>'/etc/init.d/rc5.d/S09dvb start' exits with status 1 <notice>/etc/init.d/rc5.d/S09hwscan start Starting hardware scan on boot<notice>Starting resource manager'/etc/init.d/rc5.d/S09hwscan start' exits with status 0 <notice>/etc/init.d/rc5.d/S09resmgr start <notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=31 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/sbin/resmgrd ] done <notice>'/etc/init.d/rc5.d/S09resmgr start' exits with status 0 Starting Firewall Initialization (phase 2 of 3) <notice>/etc/init.d/rc5.d/S10SuSEfirewall2_setup start done <notice>'/etc/init.d/rc5.d/S10SuSEfirewall2_setup start' exits with status 0 Starting RPC portmap daemon<notice>/etc/init.d/rc5.d/S10portmap start done <notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=33 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/sbin/portmap ] <notice>'/etc/init.d/rc5.d/S10portmap start' exits with status 0 <notice>/etc/init.d/rc5.d/S10smbfs start Mount SMB File System unused <notice>'/etc/init.d/rc5.d/S10smbfs start' exits with status 6 <notice>/etc/init.d/rc5.d/S10splash_early start <notice>'/etc/init.d/rc5.d/S10splash_early start' exits with status 0 Starting SSH daemon<notice>/etc/init.d/rc5.d/S10sshd start <notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=36 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] done <notice>'/etc/init.d/rc5.d/S10sshd start' exits with status 0 <notice>/etc/init.d/rc5.d/S10vdr start Starting Video Disk Recorder done <notice>'/etc/init.d/rc5.d/S10vdr start' exits with status 0 <notice>/etc/init.d/rc5.d/S10xdm start Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= progress=38 INIT_VERSION=sysvinit-2.82 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= vga=0x31a RUNLEVEL=5 LC_COLLATE=POSIX PWD=/ LANG=de_DE@euro PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 no_proxy=localhost RC_LC_COLLATE=POSIX WINDOWMANAGER=/usr/X11R6/bin/kde PRINTER=normal RC_LANG=de_DE@euro LC_CTYPE=de_DE@euro splash=silent sscripts=44 LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ] done <notice>'/etc/init.d/rc5.d/S10xdm start' exits with status 0 <notice>/etc/init.d/rc5.d/S11cups start Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=39 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ] done <notice>'/etc/init.d/rc5.d/S11cups start' exits with status 0 <notice>Starting Name Service Cache Daemon/etc/init.d/rc5.d/S11nscd start done <notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=40 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] <notice>'/etc/init.d/rc5.d/S11nscd start' exits with status 0 <notice>/etc/init.d/rc5.d/S11postfix start Starting mail service (Postfix) done Starting Firewall Initialization (phase 3 of 3) done <notice>'/etc/init.d/rc5.d/S11postfix start' exits with status 0 <notice>/etc/init.d/rc5.d/S12SuSEfirewall2_final start <notice>'/etc/init.d/rc5.d/S12SuSEfirewall2_final start' exits with status 0 <notice>/etc/init.d/rc5.d/S12capisuite start Starting CapiSuite <notice>startproc: execve (/usr/bin/capisuite) [ /usr/bin/capisuite -d ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=43 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/bin/capisuite ] done <notice>'/etc/init.d/rc5.d/S12capisuite start' exits with status 0 Starting CRON daemon<notice>/etc/init.d/rc5.d/S12cron start <notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=44 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/cron ] done Master Resource Control: runlevel 5 has been reached Failed services in runlevel 5: dvb Skipped services in runlevel 5: smbfs <notice>'/etc/init.d/rc5.d/S12cron start' exits with status 0 <notice>/etc/init.d/rc5.d/S13splash_late start <notice>'/etc/init.d/rc5.d/S13splash_late start' exits with status 0 <notice>killproc: kill(870,3) Ende der /var/log/boot.msg ich kann daraus als Anfänger nichts lesen
Hä? Geht es um den smpppd oder kinternet? Kinternet startet nichmehr automatisch wenn du einmal kinternet beendet und die Frage nach dem automatischen Start mit nein beantwortet hast. Einfach nochmal beenden und mit ja antworten. iST GESCHEHEN LÄUFT TROTZDEM NICHT Das ist ziehmlich lang das Ding ich wünsche viel Erfolg beim lesen. mfg M.