December 2017 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Re: [opensuse-packaging] Frustration with mongodb
by martin＠pluskal.org 04 Dec '17

04 Dec '17

On Mon, 2017-12-04 at 10:54 +0100, Frederic Crozat wrote: > Le vendredi 01 décembre 2017 à 14:48 +0100, Martin Pluskal a écrit : > > Hello > > > > As some of you might know or actually use it, we currently have > > mongodb > > in Factory [1] and corresponding devel project [2], and active > > maintainer is/was wanted for some time [3]. Given that I personally > > have > > no use for mongodb (or never had), and given that it currently > > fails > > to > > build for Factory (due to scons python3 migration) I am bit > > frustrated > > with its state. > > > > Given that today I got feedback by community: > > <randy-sk_> [11:31:38] zbite niekto Martina Puskala. Mongo, co je v > > tom > > repozitari > > https://build.opensuse.org/package/show/server:database/mongodb, je > > od > > jeho super upravy rozbite. Plus sa tam snazil dolepit mongotoolsy a > > le > > samozrejme to jeho spec sa nebuildi, kedze je to v samostatnom > > subore > > :D > > Sorry but if you want ANY help, it would be nice to get translations > for reports. Said message does not contain anything usefull, just insults and misunderstanding of how OBA work. I am also not looking for ANY help, I am looking for someone who is interested in using mongdob on openSUSE enough to maintain it - to me this package is just annoyance (see rest of my message). > > > Which would loosely translate to request that someone beats me up > > for > > breaking mongodb (I assume that is related to accepting request > > [4]), > > my > > frustration with mongodb has reached its limit. > > When I submitted this tool, I made sure it was building fine. It was - current build failures are caused by openssl-1.1 and scons3 (two separate issues which have to be solved). > > > If you are interested in maintaining this package, let me know I > > will > > add you as maintainer and reviewer in devel project, if noone steps > > in I > > will create delete request for Factory next week. > > I'm not interested in maintaining it, I just have to use it (and > apparently, nobody was using it, considering how many issues I found > when I tried to use it during last hackweek) :( Delete request has been alrady filled (see [1]), unless someone steps in I will also disable building in devel project. Regards Martin 1. https://build.opensuse.org/request/show/548033

3 2

[opensuse-factory] Frustration with mongodb
by Martin Pluskal 04 Dec '17

04 Dec '17

Hello As some of you might know or actually use it, we currently have mongodb in Factory [1] and corresponding devel project [2], and active maintainer is/was wanted for some time [3]. Given that I personally have no use for mongodb (or never had), and given that it currently fails to build for Factory (due to scons python3 migration) I am bit frustrated with its state. Given that today I got feedback by community: <randy-sk_> [11:31:38] zbite niekto Martina Puskala. Mongo, co je v tom repozitari https://build.opensuse.org/package/show/server:database/mongodb, je od jeho super upravy rozbite. Plus sa tam snazil dolepit mongotoolsy a le samozrejme to jeho spec sa nebuildi, kedze je to v samostatnom subore :D Which would loosely translate to request that someone beats me up for breaking mongodb (I assume that is related to accepting request [4]), my frustration with mongodb has reached its limit. If you are interested in maintaining this package, let me know I will add you as maintainer and reviewer in devel project, if noone steps in I will create delete request for Factory next week. Cheers Martin 1. https://build.opensuse.org/package/show/openSUSE:Factory/mongodb 2. https://build.opensuse.org/package/show/server:database/mongodb 3. https://lists.opensuse.org/opensuse-factory/2015-09/msg00078.html 4. https://build.opensuse.org/request/show/542220 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] New Tumbleweed snapshot 20171201 released!
by Dominique Leuenberger 03 Dec '17

03 Dec '17

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: ImageMagick (7.0.7.10 -> 7.0.7.11) MozillaFirefox MozillaThunderbird (52.4.0 -> 52.5.0) NetworkManager-applet (1.8.4 -> 1.8.6) PackageKit SuSEfirewall2 (3.6.369 -> 3.6.376) aaa_base (13.2+git20170828.8f12a9e -> 84.87+git20171129.a45b936) alsa appstream-glib (0.7.2 -> 0.7.4+git.3) apr-util aqbanking autofs avahi avahi-glib2 build (20171117 -> 20171128) ca-certificates corosync crash cronie device-mapper (1.02.144 -> 1.02.145) ebtables eog (3.26.1 -> 3.26.2) epiphany (3.26.2 -> 3.26.3) exiv2 fillup flatpak (0.9.8 -> 0.10.0) flatpak-builder (0.9.8 -> 0.10.4) fonts-config gcc7 git gmime (3.0.3 -> 3.0.4) gnome-software (3.26.1 -> 3.26.3) gnome-system-monitor gpm gtk3 (3.22.25 -> 3.22.26) gvfs i4l-base icedtea-web igerman98 installation-images-Kubic (14.343 -> 14.344) irqbalance ispell issue-generator kdebase4-workspace krb5 libXScrnSaver libXrandr libXt libdlm libgsf (1.14.41 -> 1.14.42) libinput (1.9.1 -> 1.9.2) libreoffice (5.4.2.2 -> 5.4.3.2) libtcnative-1-0 (1.2.4 -> 1.2.16) libteam (1.26 -> 1.27) libvirt libzypp (16.17.3 -> 17.0.3) lvm2 (2.02.175 -> 2.02.176) mariadb (10.1.25 -> 10.2.10) messagelib mysql-connector-cpp nautilus (3.26.0 -> 3.26.2) nbd ntp openldap2 pam_ssh pango (1.40.13 -> 1.40.14) pcsc-lite plasma5-workspace polkit-default-privs poppler (0.59.0 -> 0.61.1) poppler-qt5 (0.59.0 -> 0.61.1) postfix pulseaudio python (2.7.13 -> 2.7.14) python-base (2.7.13 -> 2.7.14) python-setuptools (36.7.2 -> 38.2.1) python-sip rp-pppoe rpm rubygem-cfa_grub2 (0.6.3 -> 0.6.5) sendmail subversion systemd totem tracker (2.0.1 -> 2.0.2) tracker-miners (2.0.2 -> 2.0.3) unbound update-alternatives vala (0.38.2 -> 0.38.3) vinagre virt-manager virtualbox x11-tools xdm xen (4.10.0_01 -> 4.10.0_03) xfce4-terminal (0.8.5.1 -> 0.8.6) xinetd xorg-x11-server xscreensaver yast2-apparmor (4.0.1 -> 4.0.2) yast2-core (4.0.0 -> 4.0.1) yast2-inetd (3.1.13 -> 4.0.0) yast2-perl-bindings (3.2.0 -> 4.0.0) yast2-ruby-bindings (4.0.0 -> 4.0.2) yast2-users (4.0.0 -> 4.0.1) ypbind zenity (3.24.0 -> 3.26.0) zypper (1.13.37 -> 1.14.0) zypper-lifecycle-plugin === Details === ==== ImageMagick ==== Version update (7.0.7.10 -> 7.0.7.11) Subpackages: ImageMagick-devel ImageMagick-extra libMagick++-7_Q16HDRI3 libMagickCore-7_Q16HDRI4 libMagickWand-7_Q16HDRI4 perl-PerlMagick - update to 7.0.7-11 * no upstream change log in ChangeLog, as usually would be, except Release ImageMagick version 7.0.7-11, GIT revision 21635:0447c6b46:20171111 ==== MozillaFirefox ==== Subpackages: MozillaFirefox-translations-common - Add mozilla-bmo1360278.patch Starting with Firefox 57, the context menu appears on key press. This patch creates a config entry to restore the old behaviour. Without the patch, the mouse gesture extensions require 2 clicks to work (bmo#1360278). The new config entry is named ui.context_menus.after_mouseup (default : false). - Allow experimental CSD for Gtk3 (bmo#1399611) if available and enabled widget.allow-client-side-decoration=true (mozilla-bmo1399611-csd.patch) ==== MozillaThunderbird ==== Version update (52.4.0 -> 52.5.0) Subpackages: MozillaThunderbird-translations-common - update to Thunderbird 52.5.0 (bsc#1068101) * Better support for Charter/Spectrum IMAP: Thunderbird will now detect Charter's IMAP service and send an additional IMAP select command to the server. Check the various preferences ending in "force_select" to see whether auto-detection has discovered this case. * In search folders spanning multiple base folders clicking on a message sometimes marked another message as read * IMAP alerts have been corrected and now show the correct server name in case of connection problems * POP alerts have been corrected and now indicate connection problems in case the configured POP server cannot be found MFSA 2017-26 * CVE-2017-7828 (bmo#1406750. bmo#1412252) Use-after-free of PressShell while restyling layout * CVE-2017-7830 (bmo#1408990) Cross-origin URL information leak through Resource Timing API * CVE-2017-7826 Memory safety bugs fixed in Firefox 57 and Firefox ESR 52.5 - Drop obsolete libgnomeui-devel BuildRequires: No longer needed. - Add explicit pkgconfig(gconf-2.0), pkgconfig(gobject-2.0), pkgconfig(gtk+-2.0), pkgconfig(gtk+-unix-print-2.0), pkgconfig(glib-2.0), pkgconfig(gobject-2.0) and pkgconfig(gdk-x11-2.0) BuildRequires: Previously pulled in by libgnomeui-devel, and is what configure really checks for. ==== NetworkManager-applet ==== Version update (1.8.4 -> 1.8.6) Subpackages: NetworkManager-applet-lang NetworkManager-connection-editor libnm-gtk0 libnma0 nma-data typelib-1_0-NMGtk-1_0 - Migrate build system to meson: + Add meson and gtk-doc BuildRequires. + Replace configure/make/make_install logic with meson/meson_build/meson_install. - Disable glib_schema, icon_theme and desktop_database post/postun scriptlets for suse_version >= 1330: handled by file triggers. - Add 0001-build-meson-fix-typo-in-generation-of-libnm-gtk.pc.patch: Fix typo in generation of libnm-gtk.pc (bgo#790056). - Update to version 1.8.6: + Added an option to build with Meson build system. + Fixed a possible crash after editing Wi-Fi connections. + Updated translations. ==== PackageKit ==== Subpackages: PackageKit-backend-zypp PackageKit-gstreamer-plugin PackageKit-gtk3-module PackageKit-lang libpackagekit-glib2-18 typelib-1_0-PackageKitGlib-1_0 - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== SuSEfirewall2 ==== Version update (3.6.369 -> 3.6.376) - logging: correctly set the PID of the logging process - main script: remove duplicate rules in the rpc rules area (bnc#1069760) - main script: support --trace messages - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== aaa_base ==== Version update (13.2+git20170828.8f12a9e -> 84.87+git20171129.a45b936) Subpackages: aaa_base-extras - Update to version 84.87+git20171129.a45b936: * Remove RC_* variables from language sysconf template (bsc#1069971 as well as FATE#319454) - Update to version 84.87+git20171128.945b960: * lang.(c)sh: catch if ROOT_USES_LANG becomes not set - Update to version 84.87+git20171128.aa232d3: * Add wsl specific code to profile.d/wsl.csh * move wsl specific code from profile into profile.d/wsl.sh * Remove obsolete "make package" - Update to version 84.87+git20171128.a6752e8: * lang.(c)sh: handle locale.conf if sysconfig does not - lang.(c)sh: handle locale.conf if sysconfig does not provide default locale (bsc#1069971, FATE#319454) - Update to version 84.87+git20171128.17ae554: * Check for /proc/version before using it * Remove legacy code for /proc/iSeries * Move fillup-templates to /usr/share (boo#1069468) - Fix installation of fillup-templates. - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) - use TW versioning, 13.2 is misleading - Update to version 84.87+git20171120.d36b8b1: * Fix double sourcing of /etc/bash_completion.d * create wsl.sh in /etc/profile.d to set umask in WSL * Add support for /usr/bin/fish (boo#1068840) * Get mixed use case of service wrapper script straight (bsc#1040613) ==== alsa ==== Subpackages: alsa-devel libasound2 libasound2-32bit - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== appstream-glib ==== Version update (0.7.2 -> 0.7.4+git.3) Subpackages: appstream-glib-lang libappstream-builder8 libappstream-glib8 - Update to version 0.7.4+git.3: + Do not try to extract duplicate files in the icon theme packages. + Fix the arithmetic when fitting an image in 16:9 - Update to version 0.7.4: + trivial: Disable the fonts self tests in the builder - Update to version 0.7.3+git.20171103 (f230c8): + Only try to set the file permissions on regular files. + Add the 'hardware' requires type. - Update to version 0.7.3: + Add support for URL launchable types + Prefer /usr/share/metainfo as default path for metainfo files + Do not assign "flatpak" as an app's origin when no origin was found. + Add as_app_get_release_by_version(). + lib/app-validate: Fix typo in variable name. + Write XML for newer AppStream specification versions. + Add as_app_get_screenshot_default(). + Add AS_VERSION_PARSE_FLAG_USE_BCD when formatting version strings. + Add new launchable types from the 0.11 series of the spec. + Fix the inode mode to be sane on extracted files. ==== apr-util ==== Subpackages: apr-util-devel libapr-util1 - Add apr-util-mariadb-10.2.patch: Fix detection / build with MariaDB 10.2. ==== aqbanking ==== Subpackages: aqbanking-devel aqbanking-lang - Drop --with-qt4-libs configure parameter: no longer understood by configure. - Remove libqt4-devel BuildRequires: since --with-qt4-libs is not understood anyway, we do not require the libst. ==== autofs ==== - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== avahi ==== Subpackages: avahi-compat-mDNSResponder-devel libavahi-client3 libavahi-client3-32bit libavahi-common3 libavahi-common3-32bit libavahi-core7 libavahi-devel libdns_sd - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== avahi-glib2 ==== Subpackages: libavahi-glib1 libavahi-gobject0 libavahi-ui-gtk3-0 - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== build ==== Version update (20171117 -> 20171128) Subpackages: build-mkbaselibs build-mkdrpms - Fixed Dockerfile repository parsing - Improve file name check extractbuild - track release number of containers - Define SOURCEURL and PATCHURL macros - Keep preinstalled packages - add libidn2 and libunistring to preinstall for archlinux - buildignore the sle flavor of mkbaselibs for sle ==== ca-certificates ==== - Don't require systemd, since we could be used in environments like container images, where we don't have systemd. If systemd is installed the systemd units will be used, else they are not needed. ==== corosync ==== Subpackages: libcmap4 libcorosync_common4 - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== crash ==== - Added crash-x86_64_kvtop-usable-symtab_init.patch to change x86_64_kvtop() so that it can be called during symtab_init() Added crash-allow-use-of-sadump-captured-KASLR-kernel.patch to allow use of dumps of KASLR enabled kernels that were captured by sadump. Both are bsc#1070278/FATE#323473 ==== cronie ==== Subpackages: cron - Requires mail as it's really needed by cron-crons script, not smtp_daemon [bsc#1070565] [bsc#1064834] ==== device-mapper ==== Version update (1.02.144 -> 1.02.145) Subpackages: libdevmapper-event1_03 libdevmapper1_03 libdevmapper1_03-32bit - Update to LVM2.2.02.176: Keep Install section only in lvm2-{lvmetad,lvmpolld}.socket systemd unit. Fix segfault in lvm_pv_remove in liblvm. (2.02.173) Do not allow storing VG metadata with LV without any segment. Fix printed message when thin snapshot was already merged. Remove created spare LV when creation of thin-pool failed. Avoid reading ignored metadata when mda gets used again. Fix detection of moved PVs in vgsplit. (2.02.175) Ignore --stripes/--stripesize on RAID takeover Improve used paths for generated systemd units and init shells. Disallow creation of snapshot of mirror/raid subLV (was never supported). Fix regression in more advanced vgname extraction in lvconvert (2.02.169). Allow lvcreate to be used for caching of _tdata LV. Avoid internal error when resizing cache type _tdata LV (not yet supported). Show original converted names when lvconverting LV to pool volume. Move lib code used only by liblvm into metadata-liblvm.c. Distinguish between device not found and excluded by filter. Monitor external origin LVs. Remove the replicator code, including configure --with-replicators. Allow lvcreate --type mirror to work with 100%FREE. Improve selection of resource name for complex volume activation lock. Avoid cutting first character of resource name for activation lock. Support for encrypted devices in fsadm. Improve thin pool overprovisioning and repair warning messages. Fix incorrect adjustment of region size on striped RaidLVs. - Drop: bug-960044_lvm2-lvmetad.service-add-Also-lvm2-lvmetad.socket.patch - Refresh: fate-31841_fsadm-add-support-for-btrfs.patch ==== ebtables ==== - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== eog ==== Version update (3.26.1 -> 3.26.2) Subpackages: eog-lang - Update to version 3.26.2: + Bug fix: bgo#788582, Wrong line endings and broken tags in eog's help. + Updated translations. - Drop eog-spanish-translations.patch: Fixed upstream. ==== epiphany ==== Version update (3.26.2 -> 3.26.3) Subpackages: epiphany-lang gnome-shell-search-provider-epiphany - Update to version 3.26.3: + Don't require gvfsd-http for downloading adblock filters (bgo#776682). + Several improvements to Sync support (bgo#789656, bgo#789786, bgo#790286). + Make downloads work when running in flatpak (bgo#785655). + Do not add bookmarks to unrelated tag view popovers (bgo#788584). + Fix middle click on forward/back buttons (bgo#790017). + "Search the Web for ..." context menu option now switches to new tab (bgo#790693). - Drop update-desktop-files BuildRequires and no longer use suse_update_desktop_file macro, no longer needed. ==== exiv2 ==== - split developer documentation into separate package ==== fillup ==== - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== flatpak ==== Version update (0.9.8 -> 0.10.0) - Update to version 0.10.0: + Added the flatpak config option which can set the language settings. + Fix issue where sometimes ld.so.conf were not generated. + /dev/mali0 is added to --device=dri. + Work around ostree static delta issues in some cases. - Changes from version 0.9.99: + Requires ostree 2017.12 for important pull stability fix. + New libflatpak API: flatpak_dir_cleanup_undeployed_refs, flatpak_installation_prune_local_repo, flatpak_installation_remove_local_ref_sync, flatpak_installation_cleanup_local_refs_sync. + build: FLATPAK_ID and FLATPAK_ARCH are now set in the environment when building. + update: Don't fail the entire update if some remote fails to update its metadata. + run: /.flatpak-info now lists exact commits and extensions in use. + run: We now use a per-app ld.so.cache file whenn running. This should speed things up, and allows ldconfig to report the correct results. + The verbose mode was changed into two levels, use -vv to show the more detailed info, which currently only contains the full bubblewrap argument lists. + run: Some common problematic host environment variables are now unset in the sandbox (PYTHONPATH, PERLLIB, PERL5LIB and XCURSOR_PATH). + run: Fixed failure when a higher prio extensions depended on a lower prio one. + run: The extension ld path order is now: app extensions, app, runtime extension, runtime. This was previously incorrect in that the app could override app extensions. + Extensions are now not downloaded if a matching unmaintained extension is already installed. + Preemptive changes to handle new bubblewrap change which doesn't user /newroot. + document portal: Disable debug spew that was accidentally enabled. + build-finish: New --extension-priority option. + run: Fix regression in --persist in 0.9.98. + run: Use sealed memfds (instead of just temporary files) when passing data to bubblewrap. + Updated translations. - Changes from version 0.9.98.2: + Fix permission denied when using the system-helper. - Changes from version 0.9.98.1: + run: Fix homedir access if the app has --filesystem=host access. + build-update: Fix appstream update in case one arch didn't change. + Updated translations. - Changes from version 0.9.98: + libflatpak now correctly finds metadata for subset installations (like locale data). + flatpak build now supports --appdir which exposes the per-app directory in the user homedir. This is useful when testing builds. + The host fontconfig caches are exposed to the sandbox, next to the fonts in /run/host. This will (pending fontconfig work) allow sharing host fontconfig caches, allowing much faster initial startup for flatpak apps. + flatpak install now supports --no-pull. + Added new extension property "locale-subset", which makes the extension point act like a locale extension (i.e. only install the subset configured by the locale). + flatpak remote-add --oci is disabled for now, as this is not up to date with the latest OCI work, and we don't want to break existing deployments if this has to change when this lands. + Parallel installation/updates are now safe because we take a filesystem lock whenever we prune the local ostree repo. + Flatpak run now works when important paths like $HOME, etc, are symlinks. + The ostree min-free-space property is is set to zero by default for the flatpak repos. This was causing a lot of problems for people, but the feature is still there if you manually enable it. + Updated translations. + Require ostree 2017.12. ==== flatpak-builder ==== Version update (0.9.8 -> 0.10.4) - Update to version 0.10.4: + Fixed source bundling of git repos with older versions of git. + Allow git sources to use "HEAD" branch. + Fixed crashes in some cases of git failure. - Update to version 0.10.3: + Yet more fixed or older versions of git. In particular, we disable fsck during transfer when doing a shallow clone and the git version is less than 1.8.3.2. - Changes from version 0.10.2: + Even more fixes for shallow git clones with older versions of git. + New property for git sources, disable-shallow-clone which falls back to cloning the entire remote. - Changes from version 0.10.1: + Fix handling of shallow git clones with older versions of git. + Fix issue where flatpak-builder --run could exit if some thread in the parent process exited, exposeb by e.g. gnome-builder. - Changes from version 0.10.0: + We now do shallow clones of git repos when downloading if possible. + The way the cache works internally was slightly tweaked which will cause all existing caches to be rebuilt. - Changes from version 0.9.99: + Fix git source bundling on older git version. + New property: appdata-license lets you easily modify the appstream license field. + New source type "extra-data" which makes it easier to use extra-data apps. + We now automatically compress debuginfo unless the no-debuginfo-compression option is specified. + Appstream files called .metainfo.xml are now recognized. + New prepare-platform-commands property, similar to cleanup-platform-commands, but run before importing all the changes from the SDK. + We now apply all the deletions that happened in the SDK on the base when creating the platform. - Changes from version 0.9.98: + build cache hits are now faster. + git sources have a new property "tag" which works the same as "branch", but improves readability when referencing a git tag. + flatpak-builder --run now passes --with-appdir which is useful when testing uninstalled builds. + When bundling git repos in .Sources we now make a shallow clone which uses a lot less space. + .Locale extensions now always set the new locale-subset property. + locale-subset is supported in the add-extension property. + build-options now also supports make-args and make-install args, which allows per-arch make flags. - Bump pkgconfig(flatpak) BuildRequires to 0.10.0. - Bump pkgconfig(ostree-1) BuildRequires to 2017.12. - Initial build for openSUSE, version 0.9.11. ==== fonts-config ==== - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== gcc7 ==== Subpackages: cpp7 gcc7-c++ gcc7-fortran gcc7-info gcc7-locale gcc7-objc libasan4 libatomic1 libcilkrts5 libgcc_s1 libgcc_s1-32bit libgfortran4 libgomp1 libitm1 liblsan0 libmpx2 libmpxwrappers2 libobjc4 libquadmath0 libstdc++6 libstdc++6-32bit libstdc++6-devel-gcc7 libstdc++6-locale libtsan0 libubsan0 - Add gcc7-pr82248.diff to fix bogus stack probe instruction on ARM. [bnc#1068967] ==== git ==== Subpackages: git-core git-cvs git-daemon git-email git-gui git-svn git-web gitk - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== gmime ==== Version update (3.0.3 -> 3.0.4) - Update to version 3.0.4: + No changes visible for the user. - Drop gmime-fix-build-failure.patch: fixed upstream. ==== gnome-software ==== Version update (3.26.1 -> 3.26.3) Subpackages: gnome-software-lang - Update to version 3.26.3: + Fix a common crash in the fwupd plugin. + Make category translations on the details page show up. + Updated translations. - Changes from version 3.26.2: + Various fixes to cancellable handling, making it more robust to cancel install/remove operations. + Fix a common crash in Fedora distro upgrades plugin. + Fix showing N+2 Fedora upgrades. + Fix flatpak updates inadvertently triggering a reboot. + Revert plugin GType registering changes that broke app "adopting". + Various flatpak plugin fixes. + Various snap plugin fixes. + Bump fwupd required dep to 0.9.7 and support building with new 1.0.0 API. + Avoid erroring out for operations that return more than 500 results (distro upgrades, getting gnome-shell extensions list). + Fix a few memory leaks. + Updated translations. - Enable fwupd; introduces BuildRequires on pkgconfig(fwupd) >= 0.9.7. - Remove the enable-firmware switch from the meson build options; this option has been dropped by upstream. ==== gnome-system-monitor ==== Subpackages: gnome-system-monitor-lang - Add gsm-fix-inaccurate-cpu-values.patch: fix inaccurate %CPU values in the Processes table (bgo#788922). ==== gpm ==== Subpackages: libgpm2 - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== gtk3 ==== Version update (3.22.25 -> 3.22.26) Subpackages: gtk3-data gtk3-immodule-amharic gtk3-immodule-inuktitut gtk3-immodule-thai gtk3-immodule-vietnamese gtk3-immodule-xim gtk3-lang gtk3-tools libgtk-3-0 typelib-1_0-Gtk-3_0 - Update to version 3.22.26: + Bugs fixed: bgo#785176, bgo#787142, bgo#788898, bgo#789134, bgo#789213, bgo#789630, bgo#789678, bgo#789733. + Updated translations. - Drop gtk3-wayland-distribute-server-decoration-xml.patch: fixed upstream. - Comment gnome-common Buildrequires and call to autogen.sh again: no currently applied patch changes the build system. ==== gvfs ==== Subpackages: gvfs-backend-afc gvfs-backend-samba gvfs-backends gvfs-fuse gvfs-lang - Disable caps(cap_net_bind_service=+ep) from gvfsd-nfs: this is not acceptable from a security PoV, see boo#1065864#c6). - Add gvfs-mtp-handle-read-past-eof.patch: fix hang when transferring on some Android devices (boo#1069030 bgo#784477). ==== i4l-base ==== Subpackages: i4l-isdnlog libcapi20-3 - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== icedtea-web ==== Subpackages: icedtea-web-javadoc - Modified patch: * icedtea-web-jdk10.patch + more future-proof determination of java version ==== igerman98 ==== - remove aspell dictionaries [bsc#1052951] ==== installation-images-Kubic ==== Version update (14.343 -> 14.344) - merge gh#openSUSE/installation-images#219 - add gpg-agent to instsys (bsc#1067992) - 14.344 ==== irqbalance ==== - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== ispell ==== Subpackages: ispell-american ispell-british - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== issue-generator ==== - Use official systemd macros in %post install - Don't require systemd: if it's there, we will use it, if it is not there like in a base container image, there is nothing to do for us. - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== kdebase4-workspace ==== Subpackages: kdebase4-workspace-libs python-kdebase4 - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== krb5 ==== Subpackages: krb5-32bit krb5-devel krb5-server - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== libXScrnSaver ==== Subpackages: libXss1 libXss1-32bit - Add U_libXScrnSaver_copy_root_field.patch: Copy root field from wire event into root, not window, of Xlib event. ==== libXrandr ==== Subpackages: libXrandr2 libXrandr2-32bit - Add U_libXrandr_fix-memory-leak.patch: Fix memory leak on error paths. - Drop unneeded autoconf, automake and libtool BuildRequires and no longer pass autoreconf. ==== libXt ==== Subpackages: libXt-devel libXt6 - Add U_libXt_code-cleanup.patch: Get rid of some extraneous ; at the end of C source lines. - Drop unneeded autoconf, automake and libtool BuildRequires. ==== libdlm ==== - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== libgsf ==== Version update (1.14.41 -> 1.14.42) Subpackages: gsf-office-thumbnailer libgsf-1-114 libgsf-devel typelib-1_0-Gsf-1 - Update to version 1.14.42: + Fix GsfInputTextline's file location management. + doc/Makefile.am fix for gtkdoc-scangobj. - Drop %clean section as its use is obsolete since RPM do this job now. - Add pkgconfig(gobject-2.0) BuildRequires: it was already being used and pulled along with the ever declared pkgconfig(glib-2.0) since they live in the same devel package. - Abreviate packages summaries as they were too long. ==== libinput ==== Version update (1.9.1 -> 1.9.2) Subpackages: libinput-udev libinput10 - Update to new upstream release 1.9.2 * Support for multiple paired keyboards for disable-while-typing. This is required for some of Razer's products where the keyboard exports multiple virtually identical event nodes. ==== libreoffice ==== Version update (5.4.2.2 -> 5.4.3.2) Subpackages: libreoffice-base libreoffice-base-drivers-mysql libreoffice-branding-upstream libreoffice-calc libreoffice-draw libreoffice-filters-optional libreoffice-gnome libreoffice-gtk3 libreoffice-icon-theme-breeze libreoffice-icon-theme-galaxy libreoffice-icon-theme-hicontrast libreoffice-icon-theme-sifr libreoffice-icon-theme-tango libreoffice-impress libreoffice-l10n-cs libreoffice-l10n-da libreoffice-l10n-de libreoffice-l10n-el libreoffice-l10n-en libreoffice-l10n-es libreoffice-l10n-fr libreoffice-l10n-hu libreoffice-l10n-it libreoffice-l10n-ja libreoffice-l10n-pl libreoffice-l10n-pt_BR libreoffice-l10n-ru libreoffice-l10n-zh_CN libreoffice-l10n-zh_TW libreoffice-mailmerge libreoffice-math libreoffice-pyuno libreoffice-writer libreofficekit - Version update to release 5.4.3.2: * Various fixes in 5.4 branch - Disable the CppunitTest_desktop_lib as it fails on the utf encoding ==== libtcnative-1-0 ==== Version update (1.2.4 -> 1.2.16) - Version update to version 1.2.16: * See changelog.html for in-depth upstream changes * Fixes build breakage with newer version of openssl ==== libteam ==== Version update (1.26 -> 1.27) - allow send_interface in dbus conf file for wicked. [+ 0001-allow-send_interface-dbus.patch] - Update to new upstream release 1.27 * teamd: escape some sensitive characters in ifname with double quotation marks * libteam: resynchronize ifinfo after lost RTNLGRP_LINK notifications * teamd: check port link_up when a port is added with loadbalance runner - Do not suppress errors from useradd - sync with SLES changes(bsc#1055708) * Add check_if_psr_ops_were_initialized.patch: * * Fix teamd segfault when link_watch initialization callbacks fail (e.g. lw_psr_port_added() in case of activebackup runner) due to an attempt to change hwaddr on an enslaved, link up port device. Note: enslavement triggers initialization callbacks. * Add ignore_ebusy_for_team_hwaddr_set.patch: * * Make PortAdd and PortRemove dbus methods work for all runners. Ignore attempts to change hwaddr of an already enslaved devices. (fate#318389,fate#317728,fate#316923) - Add start_teamd_from_usr_sbin.patch: * Modify service file to start teamd instance from /usr/sbin. ==== libvirt ==== Subpackages: libvirt-client libvirt-daemon libvirt-daemon-config-network libvirt-daemon-config-nwfilter libvirt-daemon-driver-interface libvirt-daemon-driver-libxl libvirt-daemon-driver-lxc libvirt-daemon-driver-network libvirt-daemon-driver-nodedev libvirt-daemon-driver-nwfilter libvirt-daemon-driver-qemu libvirt-daemon-driver-secret libvirt-daemon-driver-storage libvirt-daemon-driver-storage-core libvirt-daemon-driver-storage-disk libvirt-daemon-driver-storage-iscsi libvirt-daemon-driver-storage-logical libvirt-daemon-driver-storage-mpath libvirt-daemon-driver-storage-rbd libvirt-daemon-driver-storage-scsi libvirt-daemon-driver-uml libvirt-daemon-driver-vbox libvirt-daemon-lxc libvirt-daemon-qemu libvirt-daemon-xen libvirt-libs - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) - spec: Add BuildRequires for libtirpc-devel in preparation of removal of sunrpc from glibc - build: Use XDR_CFLAGS in more places 74a13be4-xdr-flags.patch - Replace hardcoded libvirt with Name tag when refering to subpkgs - Remove dependencies to /bin/sh in libs and nss %post scripts ==== libzypp ==== Version update (16.17.3 -> 17.0.3) - When importing multiple keys, export the individual keys ascii armored for import into the rpmdb (bsc#1069381) - version 17.0.3 (0) - Don't filter procs with a different mnt namespace (bsc#1068708) - Support repo variables in an URIs host:port component (bsc#1057640, bsc#1067605) - version 17.0.2 (0) - Solvable: fix inconsistent retrieval of mediaNr (bsc#1065677) - version 17.0.1 (0) - Locale: Fix possible segfault (bsc#1064999) - RpmDb: Remove excess keys in the zypp keyring when exporting keys only (bsc#1064380) - KeyRing: Fix deleted keys not removed from rpmdb too (bsc#1064380) - Flag gpg keycache dirty when adding/removing keys (bsc#1064380) - Version 17.x for CODE-15, 16.x. is continued on SuSE-SLE-12-SP2-Branch - version 17.0.0 (0) ==== lvm2 ==== Version update (2.02.175 -> 2.02.176) Subpackages: liblvm2app2_2 liblvm2cmd2_02 - Update to LVM2.2.02.176: Keep Install section only in lvm2-{lvmetad,lvmpolld}.socket systemd unit. Fix segfault in lvm_pv_remove in liblvm. (2.02.173) Do not allow storing VG metadata with LV without any segment. Fix printed message when thin snapshot was already merged. Remove created spare LV when creation of thin-pool failed. Avoid reading ignored metadata when mda gets used again. Fix detection of moved PVs in vgsplit. (2.02.175) Ignore --stripes/--stripesize on RAID takeover Improve used paths for generated systemd units and init shells. Disallow creation of snapshot of mirror/raid subLV (was never supported). Fix regression in more advanced vgname extraction in lvconvert (2.02.169). Allow lvcreate to be used for caching of _tdata LV. Avoid internal error when resizing cache type _tdata LV (not yet supported). Show original converted names when lvconverting LV to pool volume. Move lib code used only by liblvm into metadata-liblvm.c. Distinguish between device not found and excluded by filter. Monitor external origin LVs. Remove the replicator code, including configure --with-replicators. Allow lvcreate --type mirror to work with 100%FREE. Improve selection of resource name for complex volume activation lock. Avoid cutting first character of resource name for activation lock. Support for encrypted devices in fsadm. Improve thin pool overprovisioning and repair warning messages. Fix incorrect adjustment of region size on striped RaidLVs. - Drop: bug-960044_lvm2-lvmetad.service-add-Also-lvm2-lvmetad.socket.patch - Refresh: fate-31841_fsadm-add-support-for-btrfs.patch ==== mariadb ==== Version update (10.1.25 -> 10.2.10) Subpackages: mariadb-client mariadb-errormessages - Disable openssl compatibility checking * the check uses CRYPTO_set_mem_functions() to set debugging memory allocation function. The setting only succeeds if no allocation was done before. Our fips self-tests, which are run from the library constructor, however, do allocate memory, so the subsequent call to CRYPTO_set_mem_functions causes the compatibility check to fail * add mariadb-10.2.10-disable_openssl_compatibility_check.patch - update to 10.2.10 GA * release notes and changelogs https://downloads.mariadb.org/mariadb/+releases/ * fixes for the following security vulnerabilities * 10.2.10: CVE-2017-10378, CVE-2017-10268 * 10.2.8: CVE-2017-3636, CVE-2017-3641, CVE-2017-3653, CVE-2017-10320, CVE-2017-10365, CVE-2017-10379, CVE-2017-10384, CVE-2017-10286, CVE-2017-3257 * 10.2.6: CVE-2017-3308, CVE-2017-3309, CVE-2017-3453, CVE-2017-3456, CVE-2017-3464 * 10.2.5: CVE-2017-3313, CVE-2017-3302 * [bsc#1042632], [bsc#1043328], [bsc#1019948], [fate#323738] - refresh and rename the following patches: * mariadb-10.1.4-group.patch to mariadb-10.2.3-group.patch * mariadb-10.1.16-systemd-cmake.patch to mariadb-10.2.8-systemd-cmake.patch * mariadb-10.1.18-mysql_install_db-mariadb_dirs.patch to mariadb-10.2.3-mysql_install_db-mariadb_dirs.patch * mariadb-10.1.12-fortify-and-O.patch to mariadb-10.2.4-fortify-and-O.patch * mysql-community-server-5.1.46-logrotate.patch to mariadb-10.2.4-logrotate.patch - add mariadb-10.2.10.tar.gz.sig signature and mariadb.keyring files - start building without client library part, use mariadb-connector-c for getting libmariadb libraries. Remove libmysclient* packages - remove baselibs.conf because we no longer build client libraries here - update %{soname} to 19 (libmysqld soname) - change '=' to '>=' in Requires:mariadb-errormessages for libmysqld%{soname}. Versioned libraries shouldn't require regular packages with '='. It also causes problems during update (Problem: libmysqld18-10.1.25-3.1.x86_64 requires mariadb-errormessages = 10.1.25, but this requirement cannot be provided). Also add "Provides: mariadb-errormessages = 10.1.25" for errormessages subpackage that solves this problem for the current update. - pack new files, remove mysql specific files - remove README.SUSE as it was outdated - package cleaning * run spec-cleaner * renumber sources * reorganize subpackages order and update summaries, descriptions and groups * tweak and add some comments to the specfile * remove warning about mysql-packaging repository that is no longer used for this package * remove checks whether we build mysql or mariadb (we build mariadb only) - add galera subpackage * add missing "Requires:" (lsof, net-tools, rsync, socat, xtrabackup) for proper wsrep scripts functionality * add mariadb-10.2.9-galera_cnf.patch that enhances galera.cnf configuration file (add wsrep_on=OFF and set the location of the wsrep library) * rename README-wsrep to README.wsrep so it corresponds with the other README names * move galera_new_cluster, galera_recovery, use_galera_new_cluster.conf, wsrep_* scripts to the galera subpackage - remove the following macros definitions: * %{_tmpfilesdir} - it's been defined in systemd macros since openSUSE 13.2 * %{preferred} - we no longer need to distinguish between preferred and not preferred version (we build mariadb only) * %{with_mandatory_lz4} - mysql specific * %{build_extras}, %{pretty_name}, %{build_readline}, %{builtin_plugins} and {libname} - they are no longer needed - add the following macros * %{run_testsuite} macro that controls the run of the regression testsuite * %{ignore_testsuite_result} macro - when set to 1 it ignores results from the regression testsuite (debug purposes) * %{with_mroonga} macro (enable mroonga build for x86_64 archs only) - rename %{with_jemalloc} to %{with_tokudb} and enable tokudb for x86_64 architectures for openSUSE and SLE15 [fate#323280]. Don't enable it for SLE12 (missing jemalloc dependency) - add the following BuildRequires: * unixODBC-devel to allow ODBC support for Connect engine [bsc#1039034] * krb5-devel to build auth_gssapi.so plugin * libarchive-devel * use libboost_headers-devel instead of boost-devel for TW. Boost package has been split up and will migrate to using multibuild. This results in packages that unnecessarily build require boost-devel to cause major bottlenecks [bsc#1062583] - do not use "BuildRequires: lzo-devel" for i586 and arm because it makes build fail - add the following Requires: * hostname - as mariadb_install_db depends on this tool [bsc#1060110] * libaio-devel for libmysqld-devel because libmysqld depends on libaio - tweak build options: * remove "DWITH_ASAN=OFF" - this option was added because of mysql and it's no longer needed * switch from "-DWITH_JEMALLOC=auto" to "-DWITH_JEMALLOC=system" * use "DCMAKE_SKIP_INSTALL_RPATH" - this allows to link with -rpath during build and fixes quite a few test suite failures. When installing the file -rpath is still disabled, so this should not have any effect on the installed binaries * add "-DWITH_LIBARCHIVE=ON" and "-DWITH_MARIABACKUP=ON" * remove -DWITH_BOOST=../boost/ as we use system boost now - enable OQGRAPH to build (openSUSE only, SLE is missing Judy requirement) - disable Cassandra storage engine build as it's no longer actively being developed (See MDEV-4695) [bsc#1055165] * Remove "BuildRequires: libthrift-devel" and %{with_cassandra} macros that are no longer needed now - disable make test (Connector/C unit tests) as it requires a running server. These tests are part of mysql-test-run now (MDEV-12470) - add suse_skipped_tests.list - the list of the tests that we want to skip (they fail correctly or the fix is in progress) * adjust mysql-test-run options to skip tests listed there [bsc#1041891] - remove mytop utility that is packaged separately - remove *.jar files from mysql-test - remove python scripts remains from tokudb upstream - remove generating of the MySQL NDB Cluster filelists - remove removing of manpages for MySQL Carrier Grade Edition - provide a symlink for the my_safe_process executable that was moved from its location to bindir - update filename in /var/adm/update-messages to match documentation and build-compare pattern - README is now README.md - fix "file listed twice" build error - Also Require: libopenssl-1_0_0-devel from the libmysqlclient-devel package ==== messagelib ==== Subpackages: messagelib-lang - Add fix-richtext-saving.patch: fix the state of rich text saving in KMail's composer (kde#386660) ==== mysql-connector-cpp ==== - add mysql-connector-cpp-1.1.9-libmysql_dynamic_proxy_typos.patch to fix build by fixing copypaste errors in libmysql_dynamic_proxy.cpp file [bsc#1067883] - remove mariadb_api.patch that it's no longer needed because: * our current client library already provides mysql_get_option() * using MARIADB_BASE_VERSION is no longer working as intended as it's not defined in mariadb client library provided by mariadb-connector-c * hunk for stmt_free_result() was moved to mysql-connector-cpp-1.1.9-libmysql_dynamic_proxy_typos.patch ==== nautilus ==== Version update (3.26.0 -> 3.26.2) Subpackages: gnome-shell-search-provider-nautilus libnautilus-extension1 nautilus-lang - Update to version 3.26.2: + Fix crash in list view when expanding folders. ==== nbd ==== - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== ntp ==== Subpackages: ntp-doc - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== openldap2 ==== Subpackages: libldap-2_4-2 libldap-2_4-2-32bit libldap-data openldap2-client openldap2-devel - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== pam_ssh ==== Subpackages: pam_ssh-32bit - Explicitly call autoreconf: an implicit call requires the same version automake/autoconf to be present that was used to originally bootstrap the tarball (version 1.13). - Add support for building with OpenSSL 1.1 (bsc#1066988) * partly based on https://github.com/openssh/openssh-portable/pull/48 * add pam_ssh-openssl11.patch ==== pango ==== Version update (1.40.13 -> 1.40.14) Subpackages: libpango-1_0-0 libpango-1_0-0-32bit pango-devel typelib-1_0-Pango-1_0 - Update to version 1.40.14: + Fix char break problem introduced in 1.40.13 (bgo#789625). + Add tests for char breaking. ==== pcsc-lite ==== Subpackages: libpcsclite1 - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== plasma5-workspace ==== Subpackages: plasma5-session plasma5-workspace-devel plasma5-workspace-lang plasma5-workspace-libs - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== polkit-default-privs ==== - polkit-default-privs: adding new sddm kcm actions (bsc#1065563) - Fixed usage of %_fillupdir macro, needs to be passed to `make install` such that the file is installed into the right location. - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== poppler ==== Version update (0.59.0 -> 0.61.1) Subpackages: libpoppler-cpp0 libpoppler-devel libpoppler-glib8 poppler-tools - Update to version 0.61.1: + Core: CairoOutputDev: don't overflow y * stride when accessing image data. + Build system: - Fix incorrect paths in .pc files (fdo#103578). - add the custom buildtests target only once (fdo#103003). - Changes from version 0.61.0: + Core: - Fix crashes in broken files. - Cleanup unused functions from GlobalParams. - Tweak LZWStream::processNextCode error handling (fdo#103174). - Warning fixes. - Remove t1lib code. + Qt5: - Clean up the remaining Splash code in Arthur backend (fdo#103117). - ArthurOutputDev: Properly implement saveState/restoreState (fdo#103118). - Fix leak in ArthurOutputDev::updateFont (fdo#103508). + Build system: - Use GNUInstallDirs (fdo#103211). - Fix installing a .cc file as header. - Use -pthread flag instead of -lpthread. - Changes from version 0.60.1: + Qt5: ArthurOutputDev: Add missing 'return' in error paths. + Build system: FindLIBOPENJPEG.cmake: Add CheckCXXSourceCompiles. - Changes from version 0.60.0: + Core: - Enable libcurl support by default. - PSOutputDev: Fix wrong text generation (fdo#102760). - Added methods to get and set the font size of text fields (fdo#101692). - CairoOutputDev: Do not extend the pattern in drawImageMaskRegular. - CairoOutputDev: do not use the custom downscaling for rendering images when using cairo >= 1.14. - Fix: Build with old clang. Various crashes in broken files. And some warnings. - Add some constness to the basic classes. - Remove unused functions from GlobalParams. + Qt5: - Added methods to get and set the font size of text fields (fdo#101692). - Add whether renderToImage shows annotations. - ArthurOutputDev: . Replace Splash font rendering by Qt font rendering. . Implement the drawSoftMaskedImage method. . Fix several small bugs related to dash pattern handling. + Build system: - cmake is now the default build system. - autotools based build system has been removed. + Utils: pdfinfo: don't truncate dest name. - Drop CVE-2017-14517.patch and CVE-2017-14518.patch: fixed upstream (fdo#102687 and fdo#102688, respectively). - Add cmake BuildRequires; replace configure, make and make_install macros, with cmake, make_jobs and cmake_install: following upstream port. - Add glib2-devel BuildRequires as it's a dependency required by CMakeLists. - Drop command for removal of *.la files: with the build system port to cmake, *.la are no longer generated. ==== poppler-qt5 ==== Version update (0.59.0 -> 0.61.1) Subpackages: libpoppler-qt5-1 libpoppler-qt5-devel - Update to version 0.61.1: + Core: CairoOutputDev: don't overflow y * stride when accessing image data. + Build system: - Fix incorrect paths in .pc files (fdo#103578). - add the custom buildtests target only once (fdo#103003). - Changes from version 0.61.0: + Core: - Fix crashes in broken files. - Cleanup unused functions from GlobalParams. - Tweak LZWStream::processNextCode error handling (fdo#103174). - Warning fixes. - Remove t1lib code. + Qt5: - Clean up the remaining Splash code in Arthur backend (fdo#103117). - ArthurOutputDev: Properly implement saveState/restoreState (fdo#103118). - Fix leak in ArthurOutputDev::updateFont (fdo#103508). + Build system: - Use GNUInstallDirs (fdo#103211). - Fix installing a .cc file as header. - Use -pthread flag instead of -lpthread. - Changes from version 0.60.1: + Qt5: ArthurOutputDev: Add missing 'return' in error paths. + Build system: FindLIBOPENJPEG.cmake: Add CheckCXXSourceCompiles. - Changes from version 0.60.0: + Core: - Enable libcurl support by default. - PSOutputDev: Fix wrong text generation (fdo#102760). - Added methods to get and set the font size of text fields (fdo#101692). - CairoOutputDev: Do not extend the pattern in drawImageMaskRegular. - CairoOutputDev: do not use the custom downscaling for rendering images when using cairo >= 1.14. - Fix: Build with old clang. Various crashes in broken files. And some warnings. - Add some constness to the basic classes. - Remove unused functions from GlobalParams. + Qt5: - Added methods to get and set the font size of text fields (fdo#101692). - Add whether renderToImage shows annotations. - ArthurOutputDev: . Replace Splash font rendering by Qt font rendering. . Implement the drawSoftMaskedImage method. . Fix several small bugs related to dash pattern handling. + Build system: - cmake is now the default build system. - autotools based build system has been removed. + Utils: pdfinfo: don't truncate dest name. - Drop CVE-2017-14517.patch and CVE-2017-14518.patch: fixed upstream (fdo#102687 and fdo#102688, respectively). - Add cmake BuildRequires; replace configure, make and make_install macros, with cmake, make_jobs and cmake_install: following upstream port. - Add glib2-devel BuildRequires as it's a dependency required by CMakeLists. - Drop command for removal of *.la files: with the build system port to cmake, *.la are no longer generated. ==== postfix ==== Subpackages: postfix-doc - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== pulseaudio ==== Subpackages: libpulse-devel libpulse-mainloop-glib0 libpulse0 pulseaudio-bash-completion pulseaudio-lang pulseaudio-module-bluetooth pulseaudio-module-gconf pulseaudio-module-jack pulseaudio-module-lirc pulseaudio-module-x11 pulseaudio-module-zeroconf pulseaudio-utils - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== python ==== Version update (2.7.13 -> 2.7.14) Subpackages: python-curses python-gdbm - update to 2.7.14 * dozens of bugfixes, see NEWS for details * fixed possible integer overflow in PyString_DecodeEscape (CVE-2017-1000158, bsc#1068664) * fixed segfaults with dict mutated during search * fixed possible free-after-use problems with buffer objects with custom indexing * fixed urllib.splithost to correctly parse fragments (bpo-30500) - drop upstreamed python-2.7.13-overflow_check.patch - drop unneeded python-2.7.12-makeopcode.patch - drop upstreamed 0001-2.7-bpo-30714-ALPN-changes-for-OpenSSL-1.1.0f-3094.patch ==== python-base ==== Version update (2.7.13 -> 2.7.14) Subpackages: libpython2_7-1_0 libpython2_7-1_0-32bit python-devel python-xml - update to 2.7.14 * dozens of bugfixes, see NEWS for details * fixed possible integer overflow in PyString_DecodeEscape (CVE-2017-1000158, bsc#1068664) * fixed segfaults with dict mutated during search * fixed possible free-after-use problems with buffer objects with custom indexing * fixed urllib.splithost to correctly parse fragments (bpo-30500) - drop upstreamed python-2.7.13-overflow_check.patch - drop unneeded python-2.7.12-makeopcode.patch - drop upstreamed 0001-2.7-bpo-30714-ALPN-changes-for-OpenSSL-1.1.0f-3094.patch ==== python-setuptools ==== Version update (36.7.2 -> 38.2.1) Subpackages: python2-setuptools python3-setuptools - update to 38.2.1 * fix encoding handling of metadata when installing from a wheel - update to version 38.2.0: * #1200: easy_install now support installing from wheels: they will be installed as standalone unzipped eggs. - changes from version 38.1.0: * #1208: Improve error message when failing to locate scripts in egg-info metadata. - changes from version 38.0.0: * #458: In order to support deterministic builds, Setuptools no longer allows packages to declare install_requires as unordered sequences (sets or dicts). - update to version 37.0.0: * #878: Drop support for Python 2.6. Python 2.6 users should rely on 'setuptools < 37dev'. - changes from version 36.8.0: * #1190: In SSL support for package index operations, use SNI where available. - changes from version 36.7.3: * #1175: Bug fixes to build_meta module. ==== python-sip ==== Subpackages: python-sip-common python2-sip python2-sip-devel python3-sip - fix have_python conditions ==== rp-pppoe ==== - Add Requires/Requires(pre) group(dialout) (boo#1067511). - Add %verify_permissions script for pppoe-wrapper. ==== rpm ==== Subpackages: rpm-build rpm-devel - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== rubygem-cfa_grub2 ==== Version update (0.6.3 -> 0.6.5) - fix reading GRUB_TERMINAL (caused by fix for bsc#1068578) - 0.6.5 - avoid crash if config file uses trailing comment (bsc#1068578) - 0.6.4 ==== sendmail ==== Subpackages: libmilter1_0 - Add _FFR_TLS_EC m4 macro definition for site configuration as well (boo#1070065) ==== subversion ==== Subpackages: libsvn_auth_gnome_keyring-1-0 subversion-bash-completion subversion-devel subversion-perl subversion-python subversion-server subversion-tools - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== systemd ==== Subpackages: libsystemd0 libsystemd0-32bit libudev-devel libudev1 libudev1-32bit systemd-32bit systemd-bash-completion systemd-logger systemd-sysvinit udev - Import commit e30f1b10e276fb18db10ea2463fbd7146ae778f6 63481b24b firstboot: do not write vconsole.conf when arg_keymap is empty (bsc#1070124) - Add 0001-compat-rules-get-rid-of-scsi_id-when-generating-comp.patch (bsc#1051465) This patch is not yet merged in the 'compats/udev-compat-symlinks' branch: we asked to upstream if it would be possible to introduce a new specifier that wouldn't strip trailing whitespaces , see https://github.com/systemd/systemd/issues/7462 Also this allows to give the patch more testing before merging it in the git repo. - Drop a useless rm(1) from the specfile - Remove requires for pwdutils, we don't need the shadow tools anymore [bsc#1069150] - Import commit 4b9afa11f918796184e1264d618b4ff5d18e481b 22dcb1d04 tmpfiles: when /etc is not fully initialized, some specifiers are expected to be unresolvable (#6860) (bsc#1055664) 216beb768 tmpfiles: Allow create symlink on directories (#6039) baf85eb79 udev: net_setup_link: don't error out when we couldn't apply link config (#7328) - Remove stderr redirection to /dev/null when calling %tmpfiles_create since it's not needed anymore due to commit 22dcb1d04. Indeed the messages are no more emitted at LOG_WARN but LOG_NOTICE. - Import commit b9a41367b6c1164318443491cc3dae0e8208e15c 86804326f systemd-firstboot: add vconsole keymap support (#7035) (bsc#1046436) 9b64225e9 resolved: fix loop on packets with pseudo dns types (bsc#1065276 CVE-2017-15908) - Drop 0001-systemd-firstboot-add-vconsole-keymap-support.patch since it's been merged upstream and backported to SUSE/v234 (see above). ==== totem ==== Subpackages: nautilus-totem totem-lang totem-plugin-brasero totem-plugins - Update Url to https://wiki.gnome.org/Apps/Videos: current Totem's web page. - Add upstream stable branch bug fix commits: + totem-remove-pycopile.patch (bgo#787965). + totem-fix-properties-crash.patch (bgo#787996). + totem-add-opus-ogg.patch (bgo#788440). + totem-fix-gtk-doc.patch (bgo#789202). + totem-nb-translations.patch. - Enable gtk-doc BuildRequires again and pass -Denable-gtk-doc=true to meson, no longer fails to build. - No longer Provide and Obsolete totem-devel, we have been building this sub-package again for a long time. - Stop removing SWF and Real mime types. - No longer pass suse_update_desktop_file macro, no longer needed. ==== tracker ==== Version update (2.0.1 -> 2.0.2) Subpackages: libtracker-common-2_0 libtracker-control-2_0-0 libtracker-miner-2_0-0 libtracker-sparql-2_0-0 tracker-lang typelib-1_0-Tracker-2_0 typelib-1_0-TrackerControl-2_0 - Update to version 2.0.2: + tests: Cleanups and Coverity fixes. A testsuite for libtracker-miner's TrackerMinerFS object was added. + meson: Many small improvements. + libtracker-common: Preparation work to be able to build tracker/tracker-miners as a bundle. + libtracker-direct: Implement update_array_async() + libtracker-miner: - Multiple cleanups and code simplifications. - Properly honor lack of CHECK_MTIME flag, resulting on faster startup times if it's not set. + Updated translations. - Update Url to https://wiki.gnome.org/Projects/Tracker: current Tracker's web page. ==== tracker-miners ==== Version update (2.0.2 -> 2.0.3) Subpackages: tracker-miner-files tracker-miners-lang - Update to version 2.0.3: + meson: Multiple cleanups and fixes. + tracker-extract: Do not overwrite nie:dataSource. - Update Url to https://wiki.gnome.org/Projects/Tracker: current Tracker's web page. ==== unbound ==== Subpackages: libunbound2 unbound-anchor - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== update-alternatives ==== - Migrate u-a data from /var/lib/rpm instead of relying on dbpath: no u-a version ever installed files explicitly into dbpath, but always hard specified /var/lib/rpm. The fact that RPM moved its database is irrelevant to update-alternatives. In case RPM moved it's database, our files are still accessible via the /var/lib/rpm symlink being put in place. - Drop the arbitrary depenency on a specific rpm version: the idea was to ensure to have an rpm with the new dbpath location in place. For one, the dependency does not work as intended, and 2nd, as the migration now happens explicitly from the old u-a admindir without relying on dbpath, is no longer needed. - Move update alternatives database to new location - Update rpm requirements to avoid unnecessary builds - Use dbpath macro for locationg rpm state directory - Require exactly same version of rpm we had when building to make sure dbpath matches ==== vala ==== Version update (0.38.2 -> 0.38.3) Subpackages: libvala-0_38-0 - Update to version 0.38.3: + Various bug fixes: - codegen: Prioritize "array_length=true" over "array_null_terminated=true" (bgo#788775). - codegen: Avoid possible conflicts with internal property/signal defines (bgo#788964). + Bindings: - gio-2.0: Expose g_task_get_source_object as Task.get_unowned_source_object. - gstreamer-1.0: Update from 1.13+ git master. - gtk+-4.0: Update to 3.92.1. - libxml-2.0: Add DTD methods (bgo#789442). ==== vinagre ==== Subpackages: vinagre-lang - Change appstream file location due to appstream-glib >= 0.7.3. ==== virt-manager ==== Subpackages: virt-install virt-manager-common - Upstream bug fixes (bsc#1027942) b9bc3b60-undefine-only-persistent-domain.patch 7fc7e94f-fix-virtio-scsi-controller-target-calculation.patch 2eb455c9-correctly-calculate-virtio-scsi-controller-index.patch - bsc#1067263 - virt-install: ERROR unicode argument expected, got 'str' f836e47b-virtinst-Fix-URLFetcher-for-reading-files.patch - Drop virtinst-fix-replace-StringIO-with-io.patch ==== virtualbox ==== Subpackages: virtualbox-host-kmp-default virtualbox-qt - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) - Remove file "fix_KMS_support.patch" - Fixed upstream Add new patch file "fixes_for_4.15.patch". Modified vboxconfig.sh to issue a warning when there is a version mismatch rather than abort. ==== x11-tools ==== - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== xdm ==== Subpackages: xdm-xsession - move /var/adm/fillup-templates/sysconfig.displaymanager to %_fillupdir on TW and sle15/Leap 15 - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) - xdm.tar.bz2: Fix Xstartup, that couldn't handle env DISPLAY=(null) (bsc#1068016, patch by xwang(a)suse.com) ==== xen ==== Version update (4.10.0_01 -> 4.10.0_03) Subpackages: xen-doc-html xen-libs xen-tools xen-tools-domU - Update to Xen 4.10.0-rc6 (fate#321394, fate#322686) xen-4.10.0-testing-src.tar.bz2 - Since xen switched to Kconfig, building a debug hypervisor was done by default. Adjust make logic to build a non-debug hypervisor by default, and continue to provide one as xen-dbg.gz - fate#316614: set migration constraints from cmdline fix libxl.set-migration-constraints-from-cmdline.patch for xen-4.10 - Document the suse-diskcache-disable-flush option in xl-disk-configuration(5) (bsc#879425,bsc#1067317) - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) - Update to Xen 4.10.0-rc5 (fate#321394, fate#322686) xen-4.10.0-testing-src.tar.bz2 - fate#323663 - Run Xenstore in stubdomain xenstore-run-in-studomain.patch - bsc#1067224 - xen-tools have hard dependency on Python 2 pygrub-python3-conversion.patch xenmon-python3-conversion.patch migration-python3-conversion.patch xnloader.py xen2libvirt.py - Remove xendriverdomain.service (bsc#1065185) Driver domains must be configured manually with custom .service file ==== xfce4-terminal ==== Version update (0.8.5.1 -> 0.8.6) Subpackages: xfce4-terminal-lang - Update to version 0.8.6: - Fix handling email addresses - Allow per-tab configuration of dynamic tytle mode and initial title by adding --dynamic-tytle-mode and --initial-title options (bxo#2908) - Migrate tab 'Set Title' dialog to a gtk popover (bxo#13522) - Add option to select cursor foreground (text) color - Fix drop-down terminal ignoring 'move to monitor with pointer' option (bxo#13666) - Disable Ctrl+PgUp/PgDn shortcuts with only one tab (bxo#10469) - Fix negative dimensions GTK warning when running terminal with - -tab option - Update regexes from gnome-terminal - Fix --tab option broken lately (bxo#13587) - Fix drop-down window positioning when using --zoom option - Translation updates ==== xinetd ==== - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== xorg-x11-server ==== Subpackages: xorg-x11-server-sdk - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== xscreensaver ==== Subpackages: xscreensaver-data xscreensaver-data-extra xscreensaver-lang - Remove libgnome-devel from BuildRequires; appears to be unused (boo#1067727). ==== yast2-apparmor ==== Version update (4.0.1 -> 4.0.2) - fix textdomain to apparmor (bsc#1065569) - 4.0.2 ==== yast2-core ==== Version update (4.0.0 -> 4.0.1) - add jemalloc dependency for y2base which is used only in old testsuite and that workarounds problem with dynamic dlopening of jemalloc in ruby (bsc#1068883) - 4.0.1 ==== yast2-inetd ==== Version update (3.1.13 -> 4.0.0) - Fixed build failure caused by a jemalloc warning printed on the STDERR (bsc#1068883) - 4.0.0 ==== yast2-perl-bindings ==== Version update (3.2.0 -> 4.0.0) - Fixed build failure caused by a jemalloc warning printed on the STDERR (bsc#1068883) - 4.0.0 ==== yast2-ruby-bindings ==== Version update (4.0.0 -> 4.0.2) - Better backtrace for dynamically defined methods (bsc#1066290) - 4.0.2 - Hardcode the Ruby version in the y2start script to always use the Ruby version used at the build time (bsc#1068863) - 4.0.1 ==== yast2-users ==== Version update (4.0.0 -> 4.0.1) - AutoYaST: Write and export SSH authorized keys also for root user (bsc#1066342). - 4.0.1 ==== ypbind ==== - Prepare for new fillup location - Remove check for transactional-update, done in systemd macros now ==== zenity ==== Version update (3.24.0 -> 3.26.0) - Update to version 3.26.0: + Use GtkFileChooserNative for the file chooser. - Changes from version 3.24.1: + Fix: - Style. - Message dialog width and height on recent Gtk. - Misleading indentation. + Add clang-format script. + Bug 762347: Addition of entry text width option. + Updated translations. - Changes from version 3.24.2: + No changes. - Update Url to https://wiki.gnome.org/Projects/Zenity: current Zenity project's web page. - Point fdupes to the data directory instead of the build root, which is a practice that must be avoided. - Remove %clean section as it's no longer needed since RPM now does the job by itself. - Replace intltool by gettext BuildRequires: since upstream did the migration long ago and we don't want deviations to avoid bugs. ==== zypper ==== Version update (1.13.37 -> 1.14.0) Subpackages: zypper-aptitude zypper-log - Update manpage regarding custom repository variable fixes (bsc#1057640, bsc#1067605) - Version 1.14.x for CODE-15, 1.13.x. is continued on SuSE-SLE-12-SP2-Branch - version 1.14.0 ==== zypper-lifecycle-plugin ==== - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 5

[opensuse-factory] New Tumbleweed snapshot 20171202 released!
by Dominique Leuenberger 03 Dec '17

03 Dec '17

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: Mesa (17.2.5 -> 17.2.6) desktop-data-openSUSE ipsec-tools libpqxx nut php7 (7.1.11 -> 7.1.12) python-pyasn1 (0.3.7 -> 0.4.2) python-pyasn1-modules (0.1.5 -> 0.2.1) === Details === ==== Mesa ==== Version update (17.2.5 -> 17.2.6) Subpackages: Mesa-dri-devel Mesa-libEGL-devel Mesa-libEGL1 Mesa-libGL-devel Mesa-libGL1 Mesa-libglapi0 Mesa-libva libgbm1 libvdpau_r300 libvdpau_r600 libvdpau_radeonsi libvulkan_radeon libwayland-egl1 libxatracker2 - update to 17.2.6 * Core: fix to keep a program alive when re-linking and prevent an use-after-free. * GLSL compiler: several fixes, including one to prevent a SIGSEV when calling an undeclared subroutine in certain conditions and another to mark the xfb buffers as active only if a variable uses them. * SPIR-V compiler: fixed seveal problems involving the usage of separate images and texture/samplers. * Intel drivers: many new fixes, specially for i965. Several are focused on improving SIMD32 and little-core. It also includes a fix for a GPU hang which was detected while playing HW accelerated video with mpv. * AMD drivers: radv has seen plugged 2 memory leaks while r600 has gotten a fix through reversing the tess factor components for isolines. * swr driver: fixes for two performance regressions (one for avx512 platforms and the other for the avx/avx2 platforms). * ddebug gallium driver: fix for an use-after-free. * EGL: Wayland platform of the the DRI2 drivers got a fix to prevent crashing in ancient systems. * GLX has also received corrections to prevent a couple of errors when creating and binding a context in DRI3 and DRISW, respectively. * Build and integration: allow building libglvnd when EGL is present but not GLX. Enable building targets which don't need X11, such as omx and va, when XCB is not present. You can now specify the prefix installation for the OpenCL icd file. ==== desktop-data-openSUSE ==== - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== ipsec-tools ==== - ipsec-tools-openssl1.1.patch: build against openssl 1.1 (bsc#1066950) ==== libpqxx ==== Subpackages: libpqxx-5_0 libpqxx-devel - Changed build reuirements for python to "%{pythons}" as suggested by "openSUSE:Packaging Python Singlespec" ==== nut ==== Subpackages: libupsclient1 nut-cgi - Add support for OpenSSL 1.1.0 library, allow TLSv1 and higher (not just TLSv1) and report TLS version used in debug mode level 3 and higher (boo#1069988, openssl-1_1.patch) - Fix missing pointer dereference in upssched (nut-upssched.patch) - Support for allowfrom parameter was removed in version 2.4.0 (nut-preconfig.patch) - No more conflict with apcupsd (boo#1070373). - Remove smartups references. It is dropped since 2001. ==== php7 ==== Version update (7.1.11 -> 7.1.12) Subpackages: apache2-mod_php7 php7-bcmath php7-bz2 php7-calendar php7-ctype php7-curl php7-dba php7-devel php7-dom php7-exif php7-fastcgi php7-ftp php7-gd php7-gettext php7-gmp php7-iconv php7-imap php7-json php7-ldap php7-mbstring php7-mysql php7-odbc php7-openssl php7-pdo php7-pear php7-pear-Archive_Tar php7-pgsql php7-shmop php7-snmp php7-sockets php7-sqlite php7-sysvsem php7-sysvshm php7-tidy php7-tokenizer php7-wddx php7-xmlreader php7-xmlwriter php7-xsl php7-zlib - updated to 7.1.12: This is a bugfix release, with several bug fixes included. ==== python-pyasn1 ==== Version update (0.3.7 -> 0.4.2) Subpackages: python2-pyasn1 python3-pyasn1 - update to version 0.4.2: * Fixed explicit tag splitting in chunked encoding mode at OctetString and BitString encoders - changes from version 0.4.1: * ANY DEFINED BY clause support implemented * Encoders refactored to take either a value (as ASN.1 object) or a Python value plus ASN.1 schema * BitString decoder optimised for better performance when running on constructed encoding * Constructed types' .getComponentBy*() methods accept the `default` parameter to return instead if schema object is to be returned * Constructed types' .getComponentBy*() methods accept the `instantiate` parameter to disable automatic inner component instantiation * The ASN.1 types' `__repr__` implementation reworked for better readability at the cost of not being `eval`-compliant * Most ASN.1 types' `__str__` magic methods (except for OctetString and character types) reworked to call `.prettyPrint()` rather than `.prettyPrint` calling `__str__` as it was before. The intention is to eventually deprecate `.prettyPrint()` in favor of `str()`. The other related change is that `str()` of enumerations and boolean types will return string label instead of number. * Fixed Choice.clear() to fully reset internal state of the object * Sphinx documentation rearranged, simplified and reworded * The `isValue` singleton is now the only way to indicate ASN.1 schema as opposed to ASN.1 schema instance. The legacy `None` initializer support has been removed. * Changed `Null` object initialization behaviour: previous default value (`''`) is not set anymore. Thus `Null()` call produces a ASN.1 schema object, while `Null('')` - value object. * Migrated all docs and references from SourceForge * Imports PEP8'ed * Fixed ASN.1 encoder not to omit empty substrate produced for inner component if the inner component belongs to the simple class (as opposed to constructed class) * Fixed CER/DER encoders to respect tagged CHOICE when ordering SET components * Fixed ASN.1 types not to interfere with the Pickle protocol * Fixed Sequence/SequenceOf types decoding heuristics in schema-less decoding mode ==== python-pyasn1-modules ==== Version update (0.1.5 -> 0.2.1) - update to version 0.2.1: * Allow ANY DEFINED BY objects expanding automatically if requested * Imports PEP8'ed -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Fun with dovecot and openssl 1.1
by Christian Boltz 03 Dec '17

03 Dec '17

Hello, openssl 1.1 brought some fun with dovecot: dovecot[4381]: lmtp(19209): Fatal: Invalid ssl_protocols setting: Unknown protocol 'SSLv2' The reason was this line in /etc/dovecot/conf.d/10-ssl.conf: ssl_protocols = !SSLv2 !SSLv3 Looks like support for SSLv2 was removed from openssl 1.1 completely (not a bad move, it's known to be insecure since years) - but no longer recognizing it as excluded protocol is (at least) a bit annoying ;-) After removing the !SSLv2 part, dovecot starts again. I'm not sure if this is worth a bugreport on the openssl side, or if it will be closed as "works as designed" instantly. OTOH, the line I quoted matches the default dovecot config, so if this change is intentional on the openssl side, the default config needs to be updated. So - who should receive a bugreport? openssl for breaking backward compability, or dovecot to adjust the default config? Regards, Christian Boltz -- Reason why a bot: the bot is just less 'stressed' any makes less mistakes for such obvious things. And people can discuss with the bot as much as they want. [Dominique Leuenberger in opensuse-packaging] -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 3

[opensuse-factory] Can't provide file '' from repository = 20171129
by C. Brouerius van Nidek 03 Dec '17

03 Dec '17

My update of snapshot 20171129 stops with following remark. The remark follows the retrieval of 37 of a total of 447 files. Retry give the same info at once and ignore is of no help either. It looks like zypper has some problems with a hardlink. No idea how to repair such a problem. -------------------------------- [download.opensuse.org-oss|http://download.opensuse.org/tumbleweed/repo/oss/] Can't provide file '' from repository 'download.opensuse.org-oss' History: - Can't hardlink/copy /var/adm/mount/AP_0x97QIwY to /var/cache/zypp/packages/ download.opensuse.org-oss - Can't provide Abort, retry, ignore? [a/r/i] (a): -- opensuse:tumbleweed:20171123 Qt: 5.9.2 KDE Frameworks: 5.40.0 kf5-config: 1.0 KDE Plasma: 5.11.3 plasmashell 5.11.3 Kernel: 4.14.0-1-default Linux User 183145 working on a Pentium IV . -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] Can't provide file '' from repository = 20171129
by C. Brouerius van Nidek 02 Dec '17

02 Dec '17

My update of snapshot 20171129 stops with following remark. The remark follows the retrieval of 37 of a total of 447 files. Retry give the same info at once and ignore is of no help either. It looks like zypper has some problems with a hardlink. No idea how to repair such a problem. -------------------------------- [download.opensuse.org-oss|http://download.opensuse.org/tumbleweed/repo/oss/] Can't provide file '' from repository 'download.opensuse.org-oss' History: - Can't hardlink/copy /var/adm/mount/AP_0x97QIwY to /var/cache/zypp/packages/ download.opensuse.org-oss - Can't provide Abort, retry, ignore? [a/r/i] (a): -- opensuse:tumbleweed:20171123 Qt: 5.9.2 KDE Frameworks: 5.40.0 kf5-config: 1.0 KDE Plasma: 5.11.3 plasmashell 5.11.3 Kernel: 4.14.0-1-default Linux User 183145 working on a Pentium IV . -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 6

[opensuse-factory] Kmail / Akonadi and PostgreSQL
by Knurpht - Gertjan Lettink 02 Dec '17

02 Dec '17

Hi, FYI, after upgrading to snapshot 20171129 the above combo stopped to work. The messages on an akonadictl restart told me it exited due to a database inititiaded by postgres 9.6, where TW moved to 10. I used 'update-alternatives -- config postgresql' to move back to the 9.6 version, and akonadi is back in business. I know this is not the stock config, but pg IME outperforms mysql ( at least in akonadi's case ). -- Gertjan Lettink, a.k.a. Knurpht openSUSE Board Member openSUSE Forums Team -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] OBS: nothing provides /usr/bin/cdrdao needed by k3b
by Linux Kamarada 02 Dec '17

02 Dec '17

Hi everyone! First of all, congratulations to the OBS team, the SUSE Studio team, the KIWI team and any other teams involved in doing Studio Express. Keep up the good work! The only thing I'm really missing is testdrive, but considering that now we can use all the KIWI power on OBS, downloading the built image and testing locally on VirtualBox is just a little price worth paying! As a matter of fact, the heavy work is done on the cloud by SUSE servers free of charge... I'm trying to build a LiveDVD as close as possible from a clean openSUSE install on disk. That should be enough for it: config.kiwi (https://build.opensuse.org/package/view_file/home:livesuse:dev/LiveSUSE-Lea…) <packages type="image" patternType="plusRecommended">   <package name="patterns-openSUSE-base" /> <package name="patterns-openSUSE-x11" /> <package name="patterns-openSUSE-kde" /> <package name="sddm" /> <package name="branding-openSUSE"/> (observe the plusRecommended setting) (actually, some more packages are needed, but that is the idea, anyone interested can follow the link to the complete file) OBS succeeds. The image is built. I download it. Test it on VirtualBox. Then I realize it does not have K3b. I install K3b using zypper. Works like a charm. On purpose, I add the k3b package to the package list in config.kiwi: <package name="k3b" /> Then OBS starts building the image again, but fails. The build log shows: [ 143s] Resolving package dependencies... [ 143s] [ 143s] Problem: nothing provides /usr/bin/cdrdao needed by k3b-17.04.2-4.1.x86_64 [ 143s] Solution 1: do not install k3b-17.04.2-4.1.x86_64 [ 143s] Solution 2: break k3b-17.04.2-4.1.x86_64 by ignoring some of its dependencies [ 143s] [ 143s] Choose from above solutions by number or cancel [1/2/c] (c): c https://build.opensuse.org/package/live_build_log/home:livesuse:dev/LiveSUS… I do not understand, because the OSS repo has both k3b and cdrdao. Any ideas on what is going wrong? Thank you very much! Antonio The Linux Kamarada Project http://kamarada.github.io/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

12 30

[opensuse-factory] Can't provide file '' from repository = 20171129
by C. Brouerius van Nidek 02 Dec '17

02 Dec '17

*My update of snapshot 20171129 stops with following remark. The remark follows the retrieval of 37 of a total of 447 files. * *Retry give the same info at once and ignore is of no help either.* *It looks like zypper has some problems with a hardlink.* *No idea how to repair such a problem.* *-------------------------------- [download.opensuse.org-oss|http://download.opensuse.org/tumbleweed/repo/oss/] Can't provide file '' from repository 'download.opensuse.org-oss' History: - Can't hardlink/copy /var/adm/mount/AP_0x97QIwY to /var/cache/zypp/packages/ download.opensuse.org-oss - Can't provide Abort, retry, ignore? [a/r/i] (a): -- * *opensuse:tumbleweed:20171123* *Qt: 5.9.2* *KDE Frameworks: 5.40.0* *kf5-config: 1.0* *KDE Plasma: 5.11.3* *plasmashell 5.11.3* *Kernel: 4.14.0-1-default* *Linux User 183145 working on a Pentium IV . * -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0