December 2017 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] New Tumbleweed snapshot 20171206 released!
by Dominique Leuenberger 11 Dec '17

11 Dec '17

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: WindowMaker WindowMaker-applets aaa_base (84.87+git20171129.a45b936 -> 84.87+git20171201.65000be) apparmor at-spi2-atk at-spi2-core boost btrfsprogs cellwriter checkmedia (3.6 -> 3.7) chrome-gnome-shell cim-schema (2.45.0 -> 2.49.0) eog filesystem (13.3 -> 15.5) freerdp (2.0.0~rc0 -> 2.0.0~rc1) gmime (3.0.4 -> 3.0.5) gnome-code-assistance gnome-photos gnome-software gnome-system-monitor grub2 gvfs harfbuzz (1.6.3 -> 1.7.1) installation-images-Kubic (14.344 -> 14.346) kbd libmwaw libselinux (2.5 -> 2.6) libsemanage (2.5 -> 2.6) libsepol (2.5 -> 2.6) libsoup libtirpc (1.0.1 -> 1.0.2) libzypp (17.0.3 -> 17.0.4) ltrace lzo man mariadb (10.2.10 -> 10.2.11) mc (4.8.19 -> 4.8.20) mozjs52 mpg123 (1.25.7 -> 1.25.8) ncurses nfs-utils permissions (20171106 -> 20171129) python3-base startup-notification sysconfig (0.84.1 -> 0.84.2) system-users tomcat (8.0.44 -> 9.0.2) webkit2gtk3 wicked (0.6.41 -> 0.6.42) wireshark (2.4.2 -> 2.4.3) wmctrl === Details === ==== WindowMaker ==== - Remove xorg-x11-devel metapackage dependencies, replace it for specific pkgconfig() buildrequires or automatically generated ones for the -devel package ==== WindowMaker-applets ==== - wmSun-1.03.dif, wmnd_0.2.2.patch: Fix build with as-needed - Only BuildRequire packages that are actually needed, this change is needed to also cleaup WindowMaker-devel incorrect dependencies ==== aaa_base ==== Version update (84.87+git20171129.a45b936 -> 84.87+git20171201.65000be) Subpackages: aaa_base-extras - Update to version 84.87+git20171201.65000be: * Revert changes on sysconfig language and make lang.(c)sh to use sysconfig language as fallback or better use locale.conf as default. See discussion in bsc#1069971 and FATE#319454 as well - Update to version 84.87+git20171130.974ac5c: * Better parsing of sh variable settings in lang.csh ==== apparmor ==== Subpackages: apparmor-abstractions apparmor-docs apparmor-parser apparmor-parser-lang apparmor-profiles apparmor-utils apparmor-utils-lang pam_apparmor pam_apparmor-32bit perl-apparmor python3-apparmor - read_inactive_profile-exactly-once.patch (bsc#1069346) Perform reading of inactive profiles exactly once. ==== at-spi2-atk ==== Subpackages: at-spi2-atk-common at-spi2-atk-gtk2 libatk-bridge-2_0-0 - Switch to meson build-system: + Add meson BuildRequires. + Replace autotools macros with meson, meson_build and meson_install. + Clean up spec, run spec-cleaner. - Add explicit pkgconfig(libxml-2.0) BuildRequires: Needed after the switch to meson. ==== at-spi2-core ==== Subpackages: at-spi2-core-lang libatspi0 typelib-1_0-Atspi-2_0 - Add at-spi2-core-bgo791124-buffer-overflow.patch: fix possible buffer overflow reading dbus address in at-spi-bus-launcher (bgo#791124). - Add at-spi2-core-bgo791167-reproducible-build.patch: use @basename@ in templates, rather than @filename@; fixes build reproducibility and multiarch conflict (bgo#791167). - Switch to using meson buildsystem: + Add meson and gtk-doc BuildRequires. + Use meson, meson_build and meson_install macros instead of autotools macros. + Drop update-desktop-files BuildRequires and stop using suse_update_desktop_file macro, no longer needed. + Modernize spec, use spec-cleaner. ==== boost ==== Subpackages: boost-license1_65_1 boost_1_65-jam libboost_date_time1_65_1 libboost_filesystem1_65_1 libboost_headers1_65_1-devel libboost_iostreams1_65_1 libboost_python-py2_7-1_65_1 libboost_regex1_65_1 libboost_signals1_65_1 libboost_system1_65_1 libboost_thread1_65_1 - re-enable Python 2 by default. It's still conditional, but remains enabled by default. This can be disabled in project config. - build Python 2 conditionally - Use multibuild setup - build no-dependency libraries in the base package and build the rest of the compiled libraries in the main variant. This should speed up bootstrapping. - boost-devel not built by default anymore. - libboost_headers-devel now provides boost-devel for legacy dependencies. If you need compiled boost libraries depend on the current compiled devel subpackage. - run %fdupes only on the header files and documentation - drop build dependencies on gcc-fortran, chrpath. ==== btrfsprogs ==== Subpackages: btrfsprogs-udev-rules libbtrfs0 - Add dependencies for libreiserfscore0 3.6.27 or newer (bsc#1071085). - update to version 4.13.3: * check: fix --force, wrong check for a mounted block device * build: fix --with-convert parsing * subvol list: don't list TOPLEVEL * other: update tests - update to version 4.13.2: * subvol list: * don't list toplevel subvolume among deleted (broken since 4.8.3) * minor adjustments of uuid print format * subvol delete: * fix swapped behaviour of --commit-each and --commit-after * fix potentially lost sync if subvolumes are from different filesystems * check: add cache for metadata blocks, should improve performance * other: * new tests, testsuite updates * doc updates * cleanups - update to version 4.13.1: * image: speed up generating the sanitized names, do not generate unprintable chars * completion: add missing commands, better mount point detection * restore: add zstd support; libzstd detected automatically, will be requested by default in the future, or can be configured out * other: * misc fixes found by sparse * doc enhancements, ioctl manual page started * updated and new tests * build fixes - update to version 4.13: * convert: reiserfs support * check: new option --force to allow check of a mounted filesystem (no repair) * mkfs: --rootdir will now copy special files * dump-tree: minor output changes * inspect rootid: accept file as arugment * dev usage: don't calculate slack space for missing devices * fi du: don't print error on EMPTY_SUBVOL (inode number 2) * build: * fixed support for sanitization features on gcc (tsan, asan, ubsan) * fix PIE build * other: * misc cleanups and stability fixes * travis CI enhancements * new tests, fuzzed images * testsuite cleanups - Removed patches: - 0163-btrfs-progs-fsck-fix-segfault.patch - will be upstreamed - local-version-override.patch - not needed anymore - btrfs-support-pie.patch - upstremed - Removed patches: - 0167-Btrfs-progs-make-find_and_setup_root-return-an-error.patch - 0168-Btrfs-progs-don-t-bug-out-if-we-can-t-find-the-last-.patch - update to 4.12.1 * build: * fix cross-compilation * use gnu90 explicitly * dump-tree: more relaxed checks so -b can print block on a damaged fs * convert: fix the 1MB range exclusion * check: more dir_item hash checks * other * added missing getopt spec for some options * doc fixes * cleanups * test updates - update to 4.12 * subvol show: new options --rootid, --uuid to show subvol by the given spec * convert: progress report fixes, found by tsan * image: progress report fixes, found by tsan * fix infinite looping in find-root, or when looking for free extents * other: * code refactoring * docs updates * build: ThreadSanitizer support * tests: stricter checks for mounted filesystem - update to -4.11.1 * image: restoring from multiple devices * dev stats: make --check option work * check: fix false alert with extent hole on a NO_HOLE filesystem * check: lowmem mode, fix false alert in case of mixed inline and compressed extent * convert: work with large filesystems (many TB) * convert: fix overwriting of eb header flags * convert: do not clear NODATASUM flag in inodes when run with --no-datasum * docs updates * build: sync Android.mk with Makefile * tests: * new tests * fix 008 and 009, shell quotation mistake - update to 4.11 * receive: fix handling empty stream with -e (multi-stream) * send dump: fix printing long file names * stability fixes for: dump-super, print-tree, check * option parser updates: global options are parsed before the subcommand name (old xfstests will fail) * new and updated tests * documentation updates - btrfs-support-pie.patch: remove CFLAGS usage from linker lines, this will allow the default PIE support to work. - update to 4.10.2 * check: lowmem mode fix for false alert about lost backrefs * convert: minor bugfix * library: fix build, misisng symbols, added tests - update to 4.10.1 * receive: handle subvolume in path clone * convert: rollback fixed (rewrite was needed to address previous design issues) * build: fix build of 3rd party tools, missing <linux/sizes.h> * dump-tree: print log trees * other: new and updated tests - update to 4.10 * send: dump output fixes: missing newlies * check: several fixes for the lowmem mode, improved error reporting * build * removed some library deps for binaries that not use them * ctags, cscope * split Makefile to the autotool generated part and the rest, not needed to autogen.sh after adding a file * shared code: sync easy parts with kernel sources * other * lots of cleanups * source file reorganization: convert, mkfs, utils * lots of spelling fixes in docs, other updates * more tests - update to 4.9.1 * check: * use correct inode number for lost+found files * lowmem mode: fix false alert on dropped leaf * size reports: negative numbers might appear in size reports during device deletes (previously in EiB units) * mkfs: print device being trimmed * defrag: v1 ioctl support dropped * quota: print message before starting to wait for rescan * qgroup show: new option to sync before printing the stats * other: * corrupt-block enhancements * backtrace and co. cleanups * doc fixes - update to 4.9 * check: many lowmem mode updates * send: use splice syscall to copy buffer from kernel * receive: new option to dump the stream in textual form * convert: * move sources to own directory * prevent accounting of blocks beyond end of the device * make it work with 64k sectorsize * mkfs: move sources to own directory * defrag: warns if directory used without -r * dev stats: * new option to check stats for non-zero values * add long option for -z * library: version bump to 0.1.2, added subvol_uuid_search2 * other: * cleanups * docs updates - update to 4.8.5 * receive: fix detection of end of stream (error reported even for valid streams) * other: * added test for the receive bug * fix linking of library-test - update to 4.8.4 * check: support for clearing space cache v2 (free-space-tree) * send: * more sanity checks (with tests), cleanups * fix for fstests/btrfs/038 and btrfs/117 failures * build: * fix compilation of standalone ioctl.h, pull NULL definition * fix library link errors introduced in 4.8.3 * tests: * add more fuzzed images from bugzilla * add bogus send stream checks * fixups and enhancements for CI environment builds * misc refinements and updates of testing framework * other: * move sources for btrfs-image to own directory * deprecated and not build by default: btrfs-calc-size, btrfs-show-super * docs updates - update to 4.8.3 * check: * support for clearing space cache (v1) * size reduction of inode backref structure * send: * fix handling of multiple snapshots (-p and -c options) * transfer buffer increased (should reduce number of context switches) * reuse existing file for output (-f), eg. when root cannot create files (NFS) * dump-tree: * print missing items for various structures * new: dev stats, balance status item * sync key names with kernel (the persistent items) * subvol show: now able to print the toplevel subvolume -- the creation time might be wrong though * mkfs: * store the creation time of toplevel root inode * print UUID in the summary * build: travis CI for devel * other: * lots of cleanups and refactoring * switched to on-stack path structure * fixes from coverity, asan, ubsan * new tests * updates in testing infrastructure * fixed convert test 005 - update to 4.8.2 * convert: also convert file attributes * convert: fix wrong tree block alignment for unalianged block group * check: quota verify fixes, handle reloc tree * build: add stub for FIEMAP_EXTENT_SHARED, compiles on ancient kernels * build: add stub for BUILD_ASSERT when ioctl.h is included * dump-tree: don't crash on unrecognized tree id for -t * tests: * add more ioctl tests * convert: more symlink tests, attribute tests * quota verify for reloc tree * other cleanups - Add ability to provide site specific defaults for mkfs (FATE#320615). * Only used for SLES11 defaults. - Added patch mkfs-default-features.patch - update to 4.8.1 * 32bit builds fixed * build without backtrace support fixed - update to 4.8 * error handling improvements all over the place * new fuzzed images, test updates * doc fixups * minor cleanups and improvements * kernel library helpers moved to own directory * qgroup: fix regression leading to incorrect status after check, introduced in 4.7 - update to 4.7.3 * fixed free space tree compat status * check: low-mem mode: handle partially dropped snapshots * dump-super: consolidate options for superblock copy * tree-stats: check mount status * subvol delete: handle verbosity option * defrag: print correct error string * mkfs: fix reading rotational status * other: * UBSAN build option * documentation updates * enhanced tests: convert, fuzzed images, more tools to run on fuzzed images - removed btrfsprogs-only-install-udev-rules-for-udev-190.patch: fix build - update to 4.7.2 * check: * urgent fix: false report of backref mismatches; do not --repair last unaffected version 4.6.1 (code reverted to that state) * fuzzing and fixes * added more sanity checks for various structures * testing images added * build: udev compatibility: do not install .rules on version < 190 * other: * dump-super: do not crash on garbage value in csum_type * minor improvements in messages and help strings * documentation: * filesystem features - Add new btrfsprogs-udev-rules package to contain the udev rules. - Fix packaging for udev rules: - btrfs builtin didn't exist prior to udev v190, so the rules must depend on that version. - Added patch: * btrfsprogs-only-install-udev-rules-for-udev-190.patch - update to 4.7.1 * check: * new optional mode: optimized for low memory usage (memory/io tradeoff) * --mode=lowmem, not default, still considered experimental * does not work with --repair yet * convert: regression fix, ext2_subvol/image rw permissions * mkfs/convert: * two-staged creation, partially created filesystem will not be recognized * improved error handling (fewer BUG_ONs) * convert: preparation for more filesystems to convert from * documentation updates: quota, qgroup * other * message updates * more tests * more build options, enhanced debugging - update to 4.7 * convert: fix creating discontig extents * check: speed up traversing heavily reflinked extents within a file * check: verify qgroups of higher levels * check: repair can now fix wrong qgroup numbers * balance: new option to run in the background * defrag: default extent target size changed to 32MiB * du: silently skip non-btrfs dirs/files * documentation updates: btrfs(5), btrfs(8), balance, subvolume, scrub, filesystem, convert * bugfixes: * unaligned access (reported for sparc64) in raid56 parity calculations * use /bin/bash * other stability fixes and cleanups * more tests - Removed patches: * 0002-btrfs-progs-btrfsck-verify-qgroups-above-level-0.patch * 0003-btrfs-progs-btrfsck-write-corrected-qgroup-info-to-d.patch - update to 4.6.1 * fi resize: negative resize argument accepted again * qgroup rescan: fix skipping when rescan is in progress * mkfs: initialize stripesize to correct value * testsuite updates, mostly convert tests * documentation updates * btrfs-device, btrfs-restore manual pages enhanced * misc fixups - update to 4.6 * convert - major rewrite: * fix a long-standing bug that led to mixing data blocks into metadata block groups * the workaround was to do full balance after conversion, which was recommended practice anyway * explicitly set the lowest supported version of e2fstools to 1.41 * provide and install udev rules file that addresses problems with device mapper devices, renames after removal * send: new option: quiet * dev usage: report slack space (device size minus filesystem area on the dev) * image: support DUP * build: short options to enable debugging builds * other: * code cleanups * build fixes * more tests and other enhancements * Removed patches: * 0001-btrfs-progs-free-qgroup-counts-in-btrfsck.patch * 0169-btrfs-progs-udev-add-rules-for-dm-devices.patch * btrfs-progs-no-PKG_CHECK_VAR - btrfsck updates for qgroup verification and repair (fate#318144) * We can now check all qgroup levels * btrfsck will write out corrected qgroups when run with --repair - Added patch: 0001-btrfs-progs-free-qgroup-counts-in-btrfsck.patch - Added patch: 0002-btrfs-progs-btrfsck-verify-qgroups-above-level-0.patch - Added patch: 0003-btrfs-progs-btrfsck-write-corrected-qgroup-info-to-d.patch - update to 4.5.3 * ioctl: fix unaligned access in buffer from TREE_SEARCH; might cause SIGBUS on architectures that do not support unaligned access and do not performa any fixups * improved validation checks of superblock and chunk-related structures * subvolume sync: fix handling of -s option * balance: adjust timing of safety delay countdown with --full-balance * rescue super-recover: fix reversed condition check * check: fix bytes_used accounting * documentation updates: mount options, scrub, send, receive, select-super, check, mkfs * testing: new fuzzed images, for superblock and chunks - fix build failure on 13.1: conditional default for udevdir - fix build failure on SLE11SP4: wrong check in makefile - Add udev rules for dm devices (bsc#912170 bsc#888215) - Added patch: 0169-btrfs-progs-udev-add-rules-for-dm-devices.patch - Added patch: btrfs-progs-no-PKG_CHECK_VAR - update to 4.5.2 * new/moved command: btrfs-calc-stats -> btrfs inspect tree-stats * check: fix false alert for metadata blocks crossing stripe boundary * check: catch when qgroup numbers mismatch * check: detect running quota rescan and report mismatches * balance start: add safety delay before doing a full balance * fi sync: is now silent * fi show: don't miss filesystems with partially matching uuids * dev ready: accept only one argument for device * dev stats: print "devid:N" for a missing device instead of "(null)" * other: * lowest supported version of e2fsprogs is 1.41 * minor cleanups, test updates - Removed patch: 2000-btrfs-full-balance-warning.diff - update to 4.5.1 * mkfs: allow DUP on multidev fs * fix static build - update to 4.5 * new/moved commands * btrfs-show-super -> btrfs inspect-internal dump-super * btrfs-debug-tree -> btrfs inspect-internal dump-tree * new commands * btrfs fi du - calculate disk usage, including shared extents * enhancements * device delete - delete by id (needs kernel support, not merged to 4.6) * check - new option to specify chunk root * debug-tree/dump-tree - option -t understands human readable name of the tree (along numerical ids) * btrfs-debugfs - can dump block group information * bugfixes * all commands should accept the option separator "--" * several fixes in device scan * restore works on filesystems with sectorsize > 4k * debug-tree/dump-tree - print compression type as string * subvol sync: fix crash, memory corruption * argument parsing fixes: subvol get-default, qgroup create/destroy/assign, inspect subvolid-resolve * check for block device or regular file in several commands * other * documentation updates * manual pages for the moved tools now point to btrfs-filesystem * testsuite updates - Removed patch (upstream): 0001-btrfs-progs-libbtrfs-remove-max-min-macros-from-API.patch - Recommend btrfsmaintenance - hide min/max macros clashing with gcc 6 (bnc#966257) (0001-btrfs-progs-libbtrfs-remove-max-min-macros-from-API.patch) - update to 4.4.1 * find-root: don't skip the first chunk * free-space-tree compat bits fix * build: target symlinks * documentation updates * test updates - update to 4.4 * mkfs.btrfs --data dup * support balance filters added/enhanced in linux 4.4 * manual pages enhanced (btrfs, mkfs, mount, filesystem, balance) * 'btrfs filesystem usage' works with mixed blockgroups * build: installation to /usr/local * build: the 'ar' tool is properly deteced during cross-compilation * improved stability on fuzzed/crafted images when reading sys array in superblock * debug-tree: option -t understands ids for tree root and chnuk tree * check: properly reset nlink of multi-linked file * chunk recovery: fix floating point exception * chunk recovery: endianity bugfix during rebuild * mkfs with 64K pages and nodesize reported superblock checksum mismatch - Removed patches: * 0001-btrfs-progs-mkfs-use-correct-size-for-superblock-csu.patch * fix-doc-build-on-SLE11SP3.diff - Fix missing dependency on coreutils for initrd macros (boo#958562) - Call missing initrd macro at post / postun (boo#958562) - fix mkfs failure on ppc64 (or with sectorsize > 4k) (bsc#956819) - Added patch: 0001-btrfs-progs-mkfs-use-correct-size-for-superblock-csu.patch - update to 4.3.1 * fixes * device delete: recognize 'missing' again * mkfs: long names are not trimmed when doing ssd check * support partitioned loop devices * other * replace several mallocs with on-stack variables * more memory allocation failure handling * add tests for bugs fixed * cmd-device: switch to new message printing helpers * minor code cleanups - update to 4.3 * mkfs * mixed mode is not forced for filesystems smaller than 1GiB * mixed mode broken with mismatching sectorsize and nodesize, fixed * print version info earlier * print devices sorted by id * do not truncate target image with --rootsize * fi usage: * don't print global block reserve * print device id * minor output tuning * other cleanups * calc-size: * div-by-zero fix on an empty filesystem * fix crash * bugfixes: * more superblock sanity checks * consistently round size of all devices down to sectorsize * misc leak fixes * convert: don't try to rollback with a half-deleted ext2_saved subvolume * other: * check: add progress indicator * scrub: enahced error message * show-super: read superblock from a given offset * add README * docs: update manual page for mkfs.btrfs, btrfstune, balance, convert and inspect-internal * build: optional build with more warnings (W=...) * build: better support for static checkers * build: html output of documentation * pretty-print: last_snapshot for root_item * pretty-print: stripe dev uuid * error reporting wrappers, introduced and example use * refactor open_file_or_dir * other docs and help updates * testing: * test for nodes crossing stripes * test for broken 'subvolume sync' * basic tests for mkfs, raid option combinations * basic tests for fuzzed images (check) * command intrumentation (eg valgrind) * print commands if requested * add README for tests - build btrfsprogs-static package for 13.2 and Factory, package with static versions of the utilities, aimed for rescue environments - update to 4.2.3 - subvol sync: make it actually work again - scanning: do not scan already discovered filesystems (minor optimization) - convert: better error message in case the filesystem is not finalized - restore: off-by-one symlink path check fix - update to 4.2.2 - fi label: use fallback if the label ioctl is not available - convert: check nodesize constraints against commandline features (-O) - scrub: report status 'running' until all devices are finished - device scanning might crash in some scenarios - fi usage: print summary for non-root users - update to 4.2.1 - fix an off-by-one error in cross-stripe boundary check - convert: don't write uninitialized data to image - image: don't loop with option -t0 - image: don't create threads if compression is not requested - Removed patches: * 0001-btrfs-progs-fix-cross-stripe-boundary-check.patch - make mkfs work with 64k nodesize again, notably fixes mkfs on ppc64 (bsc#945229) - Added patch: * 0001-btrfs-progs-fix-cross-stripe-boundary-check.patch - version 4.2 * enhancements: * mkfs: do not create extra single chunks on multiple devices * resize: try to guess the minimal size, 'inspect min-dev-size' * qgroup assign: add option to schedule rescan * chunk-recover: be more verbose about the scanning process * fixes: * check: * find stripes crossing stripe boundary -- created by convert * print correct range for file hole when there are no extents and learn how to fix it * replace: more sanity checks * convert: concurrency fixes related to reporting progress * find-root: option -a will not skip the current root anymore * subvol list: fix occasional crash * do not create stripes crossing stripe boundary * build: * fixes for musl libc * preliminary support for android (not working yet, more code changes needed) * new EXTRA_CFLAGS and EXTRA_LDFLAGS * other: * lots of cleanups * tests: lots of updates, new tests, framework improvements * documentation updates * debugging: print-tree shows stripe length - Removed patches (upstreamed): * 2104-get-min-size-for-resize.patch * 2105-move-min-resize-implementation-to-inspec.patch * 2106-inspect-add-command-min-dev-size.patch - add warning before full balance starts (bsc#940467, fate#319317) - Added patches: 2000-btrfs-full-balance-warning.diff - Add feature to get minimum size a filesystem can be resized to (FATE#317897). - Added patches: * 2104-get-min-size-for-resize.patch * 2105-move-min-resize-implementation-to-inspec.patch * 2106-inspect-add-command-min-dev-size.patch - version 4.1.2 - mkfs: bugfix, previous version does not create entierly correct filesystem (has to be recreated) - version 4.1.1 * bugfixes - defrag: threshold overflow fix - fsck: - check if items fit into the leaf space - fix wrong nbytes - mkfs: - create only desired block groups for single device - preparatory work for fix on multiple devices * enhancements - new alias for 'device delete': 'device remove' * other - fix compilation on old gcc (4.3) - documentation updates - debug-tree: print nbytes - test: image for corrupted nbytes - corupt-block: let it kill nbytes - spec: drop libacl dependency - version 4.1 * bugfixes - fsck.btrfs: no bash-isms - bugzilla 97171: invalid memory access (with tests) - receive: - cloning works with --chroot - capabilities not lost - mkfs: do not try to register bare file images - option --help accepted by the standalone utilities * enhancements - corrupt block: ability to remove csums - mkfs: - warn if metadata redundancy is lower than for data - options to make the output quiet (only errors) - mixed case names of raid profiles accepted - rework the output: - more comprehensive, 'key: value' format - subvol: - show: - print received uuid - update the output - new options to specify size units - sync: - grab all deleted ids and print them as they're removed, previous implementation only checked if there are any to be deleted - change in command semantics - scrub: print timestamps in days HMS format - receive: - can specify mount point, do not rely on /proc - can work inside subvolumes - send: - new option to send stream without data (NO_FILE_DATA) - convert: - specify incompat features on the new fs - qgroup: - show: distinguish no limits and 0 limit value - limit: ability to clear the limit - help for 'btrfs' is shorter, 1st level command overview - debug tree: print key names according to their C name * new - rescure zero-log - btrfsune: - rewrite uuid on a filesystem image - new option to turn on NO_HOLES incompat feature * deprecated - standalone btrfs-zero-log * other - testing framework updates - uuid rewrite test - btrfstune feature setting test - zero-log tests - more testing image formats - manual page updates - ioctl.h synced with current kernel uapi version - convert: preparatory works for more filesystems (reiserfs pending) - use static buffers for path handling where possible - add new helpers for send uilts that check memory allocations, switch all users, deprecate old helpers - Makefile: fix build dependency generation - map-logical: make it work again - Install bash completion for btrfs. - version 4.0 * resize: * don't accept file as an argument (it's confusing) * print better error message in case of an error * restore: optionally restore metadata (time, mode, uid/gid) * receive: optionally enforce chroot * new rescue subcommand 'zero-log', same as btrfs-zero-log, but now also part of the main utility * check: * free space checks match kernel, fixes incorrect reports * convert: fix setting of checksum bit if --no-datasum is used * fsck.btrfs: don't print messages * fix quota rescan on PPC64 (mangled ioctl number) * test updates * documentation: files renamed to .asciidoc, misc fixups - version 3.19.1 - convert: - new option to specify metadata block size - --no-progress actually works - restore: properly handle the page boundary corner case - build fixes: - missing macro from public header, BTRFS_BUILD_VERSION - wrong handling of --enable-convert - fi usage: reports correct space for degraded mounts - other: - mkfs: help string updates - completion: added 'usage' subcommands - cleanups in qgroup code, preparatory work - version 3.19 - btrfs-image - restore can now run in parallel threads - fixed restore of multiple image from multiple devices onto a single dev - introduced metadump v2 - check - make --init-csum-tree and --init-extent-tree work together - find-new - option to search through all metadata even if a root was already found - convert - show progress by default, can be turned off - corrupt-block - option to work on a specific root - bash completion script for all subcommands - spec: convert to autotools Removed patch 0169-btrfs-progs-Check-metadata-mirrors-in-find-root.patch - add COPYING - version 3.18.2 * qgroup show: print human readable sizes, options to say otherwise * check: new option to explicitly say no to writes * mkfs: message about trimming is not printed to stderr * fi show: fixed return value * tests: new infrastructure * btrfstune: force flag can be used together with seeding option * backtrace support is back * getopt cleanups * doc and help updates - version 3.18.1 - minor fixes - documentation updates - version 3.18 - mkfs - skinny-metadata feature is now on by default, first introduced in kernel 3.10 - filesystem usage - give an overview of fs usage in a way that's more comprehensible than existing 'fi df' - device usage - more detailed information about per-device allocations - check: - option to set a different tree root byte number - ability to link lost files to lost+found, caused by a recent kernel bug - repair of severely corrupted fs (use with care) - convert - option to show progress - subvol create - print the commit mode inline, print the global mode only if --verbose - other updates: musl-libc support, coverity bugfixes, new test images, documentation - Removed patches (upstreamed): * 0010-btrfs-progs-move-group-type-and-profile-pretty-print.patch * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch * 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch * 0014-btrfs-progs-Add-btrfs-device-disk-usage-command.patch * 0015-btrfs-progs-cleanup-dead-return-after-usage-for-fi-d.patch * 0016-btrfs-progs-Fix-memleak-in-get_raid56_used.patch * 0017-Btrfs-progs-fi-usage-free-memory-if-realloc-fails.patch * 0019-btrfs-progs-add-original-df-and-rename-disk_usage-to.patch * 0020-btrfs-progs-move-device-usage-to-cmds-device-more-cl.patch * 0021-btrfs-progs-check-if-we-can-t-get-info-from-ioctls-d.patch * 0022-btrfs-progs-zero-out-structures-before-calling-ioctl.patch * 0024-btrfs-progs-Print-more-info-about-device-sizes.patch * 0025-btrfs-progs-compare-unallocated-space-against-the-co.patch * 0026-btrfs-progs-add-section-of-overall-filesystem-usage.patch * 0027-btrfs-progs-cleanup-filesystem-device-usage-code.patch * 0028-btrfs-progs-rework-calculations-of-fi-usage.patch * 0029-btrfs-progs-replace-df_pretty_sizes-with-pretty_size.patch * 0030-btrfs-progs-clean-up-return-codes-and-paths.patch * 0031-btrfs-progs-move-global-reserve-to-overall-summary.patch - version 3.17.3 - convert: fix conversion of sparse ext* filesystems - show: resolve to the correct path - fsck: more verbose error for root dir problems - version 3.17.2 - check improvements - add ability to replace missing dir item/dir indexes - fix missing inode items - create missing root dirid - corrupt block: enhancements for testing fsck - zero-log: able to reset a fs with bogus log tree pointer (bko#72151) - package mkinitrd scripts conditionally (bsc#893577) - spec: minor updates - version 3.17.1 - fi df: argument handling - fix linking with libbtrfs - replace: better error reporting - fi show: fixed stall if run concurrently with balance - check: fixed argument parsing for --subvol-extents - fi df: SI prefixes corrected - Added patches: * fix-doc-build-on-SLE11SP3.diff - Removed patches: * 0042-btrfs-progs-fix-linking-with-libbtrfs.patch * 0043-btrfs-progs-libbtrfs-make-exported-headers-compatibl.patch - Modified patches: * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch * 0019-btrfs-progs-add-original-df-and-rename-disk_usage-to.patch - version 3.17 - check: --init-csum-tree acutally does something useful, rebuilds the whole csum tree - /dev scanning for btrfs devices is gone - /proc/partitions scanning is gone, blkid is used exclusively - new subcommand subvolume sync - filesystem df: new options to set unit format - convert: allow to copy label from the origin, or specify a new one - Modified patches: * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch * 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch * 0014-btrfs-progs-Add-btrfs-device-disk-usage-command.patch * 0015-btrfs-progs-cleanup-dead-return-after-usage-for-fi-d.patch * 0016-btrfs-progs-Fix-memleak-in-get_raid56_used.patch * 0017-Btrfs-progs-fi-usage-free-memory-if-realloc-fails.patch * 0019-btrfs-progs-add-original-df-and-rename-disk_usage-to.patch * 0020-btrfs-progs-move-device-usage-to-cmds-device-more-cl.patch * 0021-btrfs-progs-check-if-we-can-t-get-info-from-ioctls-d.patch * 0022-btrfs-progs-zero-out-structures-before-calling-ioctl.patch * 0024-btrfs-progs-Print-more-info-about-device-sizes.patch * 0025-btrfs-progs-compare-unallocated-space-against-the-co.patch * 0026-btrfs-progs-add-section-of-overall-filesystem-usage.patch * 0027-btrfs-progs-cleanup-filesystem-device-usage-code.patch * 0029-btrfs-progs-replace-df_pretty_sizes-with-pretty_size.patch * 0030-btrfs-progs-clean-up-return-codes-and-paths.patch * 0031-btrfs-progs-move-global-reserve-to-overall-summary.patch - Added patches: * 0010-btrfs-progs-move-group-type-and-profile-pretty-print.patch * 0028-btrfs-progs-rework-calculations-of-fi-usage.patch * 0042-btrfs-progs-fix-linking-with-libbtrfs.patch * 0043-btrfs-progs-libbtrfs-make-exported-headers-compatibl.patch - Removed patches: * 0006-Btrfs-progs-fsck-clear-out-log-tree-in-repair-mode.patch * 0007-Btrfs-progs-fsck-avoid-pinning-same-block-several-ti.patch * 0008-Btrfs-progs-fsck-add-ability-to-check-reloc-roots.patch * 0018-btrfs-progs-read-global-reserve-size-from-space-info.patch * 0023-btrfs-progs-print-B-for-bytes.patch * 0028-btrfs-progs-extend-pretty-printers-with-unit-mode.patch * 0164-btrfs-progs-convert-set-label-or-copy-from-origin.patch * 0171-btrfs-progs-make-free-space-checker-work-on-non-4k-s.patch - version 3.16.2 - fsck: handle bad extent mapping - image: make it work on a balanced fs - btrfs-show-super: print flags in human readable way - documentation updates - version 3.16.1 - library version defines - subvol list: -R to print received UUID - fixed detection of multiple mounts on the same directory - restore: misc fixes - other fixes - Modified patches (sync with pending upstream versions): * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch * 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch * 0018-btrfs-progs-read-global-reserve-size-from-space-info.patch * 0020-btrfs-progs-move-device-usage-to-cmds-device-more-cl.patch * 0024-btrfs-progs-Print-more-info-about-device-sizes.patch * 0025-btrfs-progs-compare-unallocated-space-against-the-co.patch * 0028-btrfs-progs-extend-pretty-printers-with-unit-mode.patch * 0029-btrfs-progs-replace-df_pretty_sizes-with-pretty_size.patch - Removed patch: library-version-defines.patch (upstream) - send-stream API users updatd, drop the workaround - Removed patch: send-stream-api-wokaround.patch - workaround for send api breakage - Added patch: send-stream-api-wokaround.patch - add api versioning and package version.h (now 0.1.1) - Added patches: * library-version-defines.patch - version 3.16 - show-super: skip unrecognized sb, add option to force - debug-tree: print tree by id - mkfs: new option to specify UUID - receive: new option to limit number of errors - check: new option to verify quotas - check: reduced memory requirements - check: new option to print extent sharing - restore: check length before decompression - restore: more error handling - balance: new filter 'limit' - recover: allow to read all sb copies - restore: option to loop during restoring - mkfs: drop experimental notice - btrfstune: new option to force dangerous changes - documentation updates - Deleted patches (upstream): * 0001-btrfs-progs-doc-fix-symlink-target-for-btrfsck.8.patch * 0200-btrfs-progs-print-qgroup-excl-as-unsigned.patch * 0201-btrfs-progs-import-ulist.patch * 0202-btrfs-progs-add-quota-group-verify-code.patch * 0203-btrfs-progs-show-extent-state-for-a-subvolume.patch * 0204-btrfs-progs-ignore-orphaned-qgroups-by-default.patch * btrfs-progs-canonicalize-pathnames-for-device-commands - Refreshed patches: * 0006-Btrfs-progs-fsck-clear-out-log-tree-in-repair-mode.patch * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch * 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch * 0028-btrfs-progs-extend-pretty-printers-with-unit-mode.patch * 0164-btrfs-progs-convert-set-label-or-copy-from-origin.patch - refresh references on the following patches: * 0200-btrfs-progs-print-qgroup-excl-as-unsigned.patch * 0201-btrfs-progs-import-ulist.patch * 0202-btrfs-progs-add-quota-group-verify-code.patch * 0203-btrfs-progs-show-extent-state-for-a-subvolume.patch - btrfs-progs: ignore orphaned qgroups by default - Added patch: * 0204-btrfs-progs-ignore-orphaned-qgroups-by-default.patch - btrfs-progs: show extent state for a subvolume (bnc#865621) - Added patch: * 0203-btrfs-progs-show-extent-state-for-a-subvolume.patch - btrfs-progs: canonicalize pathnames for device commands (bnc#880486). - Added patch: * btrfs-progs-canonicalize-pathnames-for-device-commands - fsck: fix checking on filesystems with large sectorsize (bnc#872286) - Added patches: * 0171-btrfs-progs-make-free-space-checker-work-on-non-4k-s.patch - Do not package btrfs-find-root and btrfs-select-super by default. - Removed printing byte number for every slot (bnc#872364). - Removed patch: * 0170-btrfs-progs-In-find-root-dump-bytenr-for-every-slot.patch - update to upstream 3.14.2 - man: separate pages for all subcommands - minor bugfixes - spec: removed upstreamed patches, update build dependencies - Added patches: * 0001-btrfs-progs-doc-fix-symlink-target-for-btrfsck.8.patch - Removed patches: * 0001-Btrfs-progs-fix-check-to-test-trim-support.patch * 0002-Btrfs-progs-fsck-fix-double-free-memory-crash.patch * 0003-Btrfs-progs-mkfs-Remove-zero_end-1-since-it-has-been.patch * 0004-btrfs-progs-fix-wrong-max-system-array-size-check-in.patch * 0005-btrfs-progs-move-arg_strtou64-to-a-separate-file-for.patch * 0009-btrfs-progs-prevent-close_root-if-the-root-to-close-.patch * 0010-btrfs-progs-fix-mkfs.btrfs-segfault-with-features-op.patch - add quota group verify patches, sent to list near end of the week starting 5/4/2014 - updates btrfsck with the ability to verify quota groups - Update the changelog with some sad version of diffstat output to meet requirements. - Added patches: * 0200-btrfs-progs-print-qgroup-excl-as-unsigned.patch * 0201-btrfs-progs-import-ulist.patch * 0202-btrfs-progs-add-quota-group-verify-code.patch - add quota group verify patches, sent to list near end of the week starting 5/4/2014 - updates btrfsck with the ability to verify quota groups - update to upstream 3.14.1 - mkfs: - fix TRIM detection - do not zero-out end of device unconditionally - no crash with --features option - fsck: - clear log tree in repair mode - check reloc roots - btrfs - reworked space reporting (bnc#873106) - btrfs fi usage - new command - btrfs dev usage - new command - btrfs fi df - enhanced output with GlobalReserve - Removed patches: * 0001-btrfs-progs-move-arg_strtou64-to-a-separate-file-for.patch - Added patches: * 0001-Btrfs-progs-fix-check-to-test-trim-support.patch * 0002-Btrfs-progs-fsck-fix-double-free-memory-crash.patch * 0003-Btrfs-progs-mkfs-Remove-zero_end-1-since-it-has-been.patch * 0004-btrfs-progs-fix-wrong-max-system-array-size-check-in.patch * 0005-btrfs-progs-move-arg_strtou64-to-a-separate-file-for.patch * 0006-Btrfs-progs-fsck-clear-out-log-tree-in-repair-mode.patch * 0007-Btrfs-progs-fsck-avoid-pinning-same-block-several-ti.patch * 0008-Btrfs-progs-fsck-add-ability-to-check-reloc-roots.patch * 0009-btrfs-progs-prevent-close_root-if-the-root-to-close-.patch * 0010-btrfs-progs-fix-mkfs.btrfs-segfault-with-features-op.patch * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch * 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch * 0014-btrfs-progs-Add-btrfs-device-disk-usage-command.patch * 0015-btrfs-progs-cleanup-dead-return-after-usage-for-fi-d.patch * 0016-btrfs-progs-Fix-memleak-in-get_raid56_used.patch * 0017-Btrfs-progs-fi-usage-free-memory-if-realloc-fails.patch * 0018-btrfs-progs-read-global-reserve-size-from-space-info.patch * 0019-btrfs-progs-add-original-df-and-rename-disk_usage-to.patch * 0020-btrfs-progs-move-device-usage-to-cmds-device-more-cl.patch * 0021-btrfs-progs-check-if-we-can-t-get-info-from-ioctls-d.patch * 0022-btrfs-progs-zero-out-structures-before-calling-ioctl.patch * 0023-btrfs-progs-print-B-for-bytes.patch * 0024-btrfs-progs-Print-more-info-about-device-sizes.patch * 0025-btrfs-progs-compare-unallocated-space-against-the-co.patch * 0026-btrfs-progs-add-section-of-overall-filesystem-usage.patch * 0027-btrfs-progs-cleanup-filesystem-device-usage-code.patch * 0028-btrfs-progs-extend-pretty-printers-with-unit-mode.patch * 0029-btrfs-progs-replace-df_pretty_sizes-with-pretty_size.patch * 0030-btrfs-progs-clean-up-return-codes-and-paths.patch * 0031-btrfs-progs-move-global-reserve-to-overall-summary.patch - own mkinitrd directories - add missing symbol to library (bnc#873164) - add version dependency for devel package - Added patches: * 0001-btrfs-progs-move-arg_strtou64-to-a-separate-file-for.patch - fsck: fixes and enahancements to --init-extent-tree mode - fsck: chunk-recover updates - scrub: add force option -f - send: check if subvolumes are read-only - subvol snapshot: add options to affect commit behaviour - btrfs: add properties command group - restore: add dry-run option - restore: fix restoring of compressed files - mkfs: support for no-holes feature - mkfs: option -r deals with hardlinks and relative paths - mkfs: discard phase is interruptible - documentation updates - cleaned spec file - Removed patches: * 0162-btrfs-progs-fix-loop-device-mount-checks.patch * 0165-Revert-btrfs-progs-update-options-in-find-root.c.patch * 0166-Btrfs-progs-add-some-verbose-output-to-find-root.patch - bump version to 3.12 - update tarball and remove upstreamed patches - fsck, image, restore: various improvements and fixes - btrfs: quota rescan (fate#312751) - fsck updates - more mkfs sanity checks - qgroup rescan wait - Added patches: * 0050-Btrfs-progs-commit-the-csum_root-if-we-do-init-csum-.patch * 0051-btrfs-progs-Fix-getopt-on-arm-ppc-platforms.patch * 0052-btrfs-progs-fix-duplicate-__-su-typedefs-on-ppc64.patch * 0053-btrfs-progs-use-reentrant-localtime.patch * 0054-btrfs-progs-don-t-have-to-report-ENOMEDIUM-error-dur.patch * 0055-Btrfs-progs-added-btrfs-quota-rescan-w-switch-wait.patch * 0056-btrfs-progs-fix-qgroup-realloc-inheritance.patch * 0057-Btrfs-progs-fix-restore-command-leaving-corrupted-fi.patch * 0058-btrfs-progs-avoid-write-to-the-disk-before-sure-to-c.patch * 0059-btrfs-progs-error-if-device-for-mkfs-is-too-small.patch * 0060-btrfs-progs-error-if-device-have-no-space-to-make-pr.patch * 0061-btrfs-progs-calculate-available-blocks-on-device-pro.patch * 0062-Btrfs-progs-keep-track-of-transid-failures-and-fix-t.patch - Change udev rule filename in setup-btrfs.sh to /usr/lib/udev/rules.d/64-btrfs.rules from from /usr/lib/udev/rules.d/80-btrfs.rules (bnc#839960 comment#7) - Remove udev rules file - udev packages one itself (bnc#839960). - update to upstream master (194aa4a1) - btrfs-restore: deal with NULL returns from read_node_slot - btrfs-restore: use the correct leafsize when reading the FS location - btrfs-find-root: Add options to control generation and level - btrfsck: fix incorrect casting on items in the corrupt_blocks tree - Btrfs-progs: fix closing of devices - Btrfs-progs: enhance btrfs-image to restore image onto multiple disks - Btrfs-progs: cleanup btrfs-image usage - Btrfs-progs: delete fs_devices itself from fs_uuid list before freeing - Btrfs-progs: skip open devices which is missing - Btrfs-progs: fix misuse of skinny metadata in btrfs-image - Btrfs-progs: recover raid0/raid10/raid5/raid6 metadata chunk - Btrfs-progs: Add chunk rebuild function for RAID1/SINGLE/DUP - Btrfs-progs: introduce list_{first, next}_entry/list_splice_tail{_init} - Btrfs-progs: Add chunk recover function - using old chunk items - Btrfs-progs: Add block group check funtion - Btrfs-progs: extend the extent cache for the device extent - Btrfs-progs: use rb-tree instead of extent cache tree for fs/file roots - Btrfs-progs: introduce common insert/search/delete functions for rb-tree - Btrfs-progs: cleanup similar code in open_ctree_* and close_ctree - Btrfs-progs: Don't free the devices when close the ctree - Btrfs-progs: don't close the file descriptor 0 when closing a device - Btrfs-progs: fix missing recow roots when making btrfs filesystem - Add fix for passing super_nr while opening ctree - btrfs-progs-mkfs-default-extref.diff: turn on extended refs by default, (aka hardlink count limtitation) (bnc#835695) - added 0040-btrfs-progs-fix-loop-device-mount-checks.patch: fix loop mount detection again (bnc#834173) - Simplify checks in mkinitrd scripts. They are always true because they come from the same package Use relative paths to binaries - Move udev rules to /usr. - Adjust rules to call binary from /usr - Simplify fsck.btrfs, its just a dummy until fixed - update to upstream master (f00dd8386a57d241d0f7c) - Make requirement on libattr-devel explicit - initrd support: add module (bnc#750185, bnc#727383) - set correct file mode if writing replacement fsck - fix build failure - add btrfs-debug-tree to initrd - adjust fs size to correct size (bnc#744593) - man page documentation updates - do not package obsolete utilities - mkfs: store correct size of device in superblock (bnc#730103) - updated restriper/balance commands to match kernel version - place binaries in /usr tree (UsrMerge project) - adjust mkinitrd scrippt accordingly - add btrfsck repair options for: - rebuild extent records - fix block group accounting - reset csums for rescue nodatasum mount - prune corrupt extent allocation tree blocks - device scanning fixes for dm and multipath (bnc#749540) - initrd support: move btrfs device scan after block device setup - documentation updates - add csize for file commpressed size - updated restore utility - patch license to follow spdx.org standard - btrfs-progs-fix-open_ctree_usage_segfaults.patch: fix segfaults from bnc#710486 due to unchecked usage of return value of open_ctree() [fixed compilation warnings] - pull upstream, replace existing patches, spec update - update 'restore' utility - lzo support - tools may now take earlies superblock when opening the fs - other fixes - pull integration-20111030 branch - mkfs: force mkfs if desired - other fixes - add btrfs-dump-super to mkinitrd - other fixes - skip non-existent devices or without media - documentation updates - scrubbing single device - graceful error handling when opening fs fails - updated mkinitrd script to scan devices before mount (bnc#727383) - add several tools to mkinitrd if root fs is btrfs - pull upstream branch and delete local patches - btrfsck: ignore -a (bnc#655906) - btrfsck: fix strerror value - Remove redundant tags/sections from specfile - Use %_smp_mflags for parallel build - add patch for local version override as we do not build from git, and avoid doubled "Btrfs" in output of 'btrfs' - reorder help for 'get-default' right after 'set-default' - add option -p to print parent subvolume - add subvolume 'get-default' subsubcommand - remove debugging printf from 0001-Btrfs-progs-add-a-btrfs-select-super-command-to-over.patch - add support for currently available kernel features: - add scrub subcommand - scan /proc/partitions by default (or use --all-devices for all) - mkfs fixes and improvements - documentation fixes - fix failing on deleted loop mounts (bnc#697671) - update from git: - add btrfs-select-super utility - add btrfs-label utility - allow mixed data+metadata (option --mixed) - allow populating new filesystem with files (option --rootdir) - allow discard support in mkfs - lzo support - deprecate 'btrfsctl' 'btrfs-vol' 'btrfs-show' - other bugfixes and documentation improvements - change to a hardlink - add link for fsck.btrfs (bnc#665899) - update to v0.19-35-g1b444cd: * used space accounting fix for the converter * Add btrfs-list for listing subvolumes * Add new util: 'btrfs' * multidevice support for check_mounted * check slash in deleting subvolumes * Add btrfsck option to select the super block copy * btrfs-debug-tree: add -d option to print only the device mapping - fix crash on creating filesystems (bnc#603620) - revert last change (bnc#599224#c3) - add hardlink from fsck.btrfs (bnc#599224) - fix memory leak (bnc#537633) - Updated to latest repo version. - used space accounting fix for the converter - btrfsctl: add snapshot/subvolume destroy ioctl - btrfsck: check root back/forward references - Add btrfs-map-logical program to map and read logical block numbers - build btfs-convert (bnc#572912) - enable parallel build - added Supplements - move apps to /sbin - update to 0.19: - build with rpm optflags - install man pages - fix leak in extends checking (bnc#523447) ==== cellwriter ==== - Convert to pkgconfig() style buildrequires - Do not buildrequire xorg-x11-devel metapackage. ==== checkmedia ==== Version update (3.6 -> 3.7) - merge gh#openSUSE/checkmedia#4 - determine image size correctly (bsc#1070745) - more comments - 3.7 ==== chrome-gnome-shell ==== - Add chrome-gnome-shell-nb-translation.patch: Add Norwegian Bokm�l translation. ==== cim-schema ==== Version update (2.45.0 -> 2.49.0) - Upgrade to version 2.49.0 http://www.dmtf.org/sites/default/files/cim/cim_schema_v2490/releasenotes.h… - Upgrade to version 2.48.0 http://www.dmtf.org/sites/default/files/cim/cim_schema_v2480/releasenotes.h… - Upgrade to version 2.47.0 http://www.dmtf.org/sites/default/files/cim/cim_schema_v2470/releasenotes.h… - Upgrade to version 2.46.0 http://www.dmtf.org/sites/default/files/cim/cim_schema_v2460/releasenotes.h… ==== eog ==== Subpackages: eog-lang - Drop update-desktop-files BuildRequires and no longer pass suse_update_desktop_file macro, not needed anymore. - Drop eog2 Provides and Obsoletes, no current openSUSE release have ever had eog2. - Modernize spec, use autosetup and make_build macros. ==== filesystem ==== Version update (13.3 -> 15.5) - Fix incomplete /usr/X11R6 drop from 2013 - Create fs-var.conf for systemd-tmpfiles, which contains all directories and links below /var. This is needed for systems, which use transactional update, read-only root filesystem, or other things, where either /var is not available during upgrade or does not survive a reboot. So that systemd-tmpfiles could create them at next boot. - Drop deprecated /usr/tmp compat link ==== freerdp ==== Version update (2.0.0~rc0 -> 2.0.0~rc1) Subpackages: libfreerdp2 libwinpr2 - Updated to 2.0.0-rc1 Noteworthy features and improvements: * support for FIPS mode was added (option +fipsmode) * initial client side kerberos support (run cmake with WITH_GSSAPI) * support for ssh-agent redirection (as rdp channel) * the man page(s) and /help were updated an improved * add support for ICU for unicode conversion (-DWITH_ICU=ON) * client add option to force password prompt before connection (/from-stdin[:force]) * extend /size to allow width or height percentages (#gh/FreeRDP/FreeRDP/4146) * add support for "password is pin" * clipboard is now enabled per default (use -clipboard to disable) Fixed github issues (excerpt): * #gh/FreeRDP/FreeRDP/4281: Added option to prefer IPv6 over IPv4 * #gh/FreeRDP/FreeRDP/3890: Point to OpenSSL doc for private CA * #gh/FreeRDP/FreeRDP/3378: support 31 static channels as described in the spec * #gh/FreeRDP/FreeRDP/4253: Rfx decode tile width. * #gh/FreeRDP/FreeRDP/3267: fix parsing of drivestoredirect * #gh/FreeRDP/FreeRDP/4257: Proper error checks for /kbd argument * #gh/FreeRDP/FreeRDP/4249: Corruption due to recursive parser * #gh/FreeRDP/FreeRDP/4111: 15bpp color handling for brush. * #gh/FreeRDP/FreeRDP/3509: Added Ctrl+Alt+Enter description * #gh/FreeRDP/FreeRDP/3211: Return freerdp error from main. * #gh/FreeRDP/FreeRDP/3513: add better description for drive redirection * #gh/FreeRDP/FreeRDP/4199: ConvertFindDataAToW string length * #gh/FreeRDP/FreeRDP/4135: client/x11: fix colors on big endian * #gh/FreeRDP/FreeRDP/4089: fix h264 context leak when DeleteSurface * #gh/FreeRDP/FreeRDP/4117: possible segfault * #gh/FreeRDP/FreeRDP/4091: fix a regression with remote program ==== gmime ==== Version update (3.0.4 -> 3.0.5) - Update to version 3.0.5: + No changes visible for the user. - Adopt the use of %make_build macro instead of raw make command, following the best practices. ==== gnome-code-assistance ==== - Add Add-vala-0.40-support.patch: Fix build with vala 0.40, taken from git. ==== gnome-photos ==== Subpackages: gnome-photos-lang gnome-shell-search-provider-gnome-photos - Add upstream stable commits: + Add gnome-photos-properties-dialog-dont-leak.patch: properties-dialog: Don't leak the error. + Add gnome-photos-main-toolbar-dont-leak.patch: main-toolbar: Don't leak the preview's GMenu. + Add gnome-photos-nb-translations.patch: Add updated Norwegian bokm�l translation. - Run spec-cleaner, modernize spec, use autosetup and make_build macros. - Drop hicolor-icon-theme BuildRequires: No longer needed. - Replace update-desktop-files with desktop-file-utils BuildRequires and no longer pass suse_update_desktop_file macro: Align more closely with what upstream expects. ==== gnome-software ==== Subpackages: gnome-software-lang - Add gs-add-locking-to-the-repos-plugin.patch: Add locking to the repos plugin so that we don't modify the priv->urls hash table concurrently from multiple threads (rh#1516536). - Run spec-cleaner, modernize spec, use autosetup macro, no longer rm la files, not needed as we are using meson buildsystem. - Drop update-desktop-files BuildRequires and no longer use suse_update_desktop_file macro, no longer needed. - Explicitly pass enable-ubuntuone=false to meson. ==== gnome-system-monitor ==== Subpackages: gnome-system-monitor-lang - Add gnome-system-monitor-nb-translation.patch: Update Norwegian bokm�l translations. ==== grub2 ==== Subpackages: grub2-i386-pc grub2-snapper-plugin grub2-systemd-sleep-plugin grub2-x86_64-efi grub2-x86_64-xen - Fix http(s) boot security review (bsc#1058090) * 0002-AUDIT-0-http-boot-tracker-bug.patch ==== gvfs ==== Subpackages: gvfs-backend-afc gvfs-backend-samba gvfs-backends gvfs-fuse gvfs-lang - Re-enabele caps(cap_net_bind_service=+ep)for gvfsd-nfs: the permissions package was updated to reflect this change. - Add appropriate post/verifyscripts to set the capabilities as defined in the permissions package. ==== harfbuzz ==== Version update (1.6.3 -> 1.7.1) Subpackages: harfbuzz-devel libharfbuzz-icu0 libharfbuzz0 libharfbuzz0-32bit - Update to version 1.7.1: + Fix atexit object destruction regression. + Fix minor integer-overflow. - Changes from version 1.7.0: + Minor Indic fixes. + Implement kerning and glyph names in hb-ot-font. + Various DSO optimization re .data and .bss sizes. + Make C++11 optional; build fixes. + Mark all other backends "unsafe-to-break". + Graphite fix. ==== installation-images-Kubic ==== Version update (14.344 -> 14.346) - merge gh#openSUSE/installation-images#217 - Replace ntp with chrony (fate#323432) - 14.346 - merge gh#openSUSE/installation-images#220 - Adjust for new fillup-templates location (boo#1069468) - 14.345 ==== kbd ==== Subpackages: kbd-legacy - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== libmwaw ==== - Add patch to build with old gcc: * libmwaw-0.3.13-buildfix.patch ==== libselinux ==== Version update (2.5 -> 2.6) Subpackages: libselinux-devel libselinux1 libselinux1-32bit - Update to version 2.6. Notable changes: * selinux_restorecon: fix realpath logic * sefcontext_compile: invert semantics of "-r" flag * sefcontext_compile: Add "-i" flag * Introduce configurable backends * Add function to find security.restorecon_last entries * Add openrc_contexts functions * Add support for pcre2 * Handle NULL pcre study data * Add setfiles support to selinux_restorecon(3) * Evaluate inodes in selinux_restorecon(3) * Change the location of _selinux.so * Explain how to free policy type from selinux_getpolicytype() * Compare absolute pathname in matchpathcon -V * Add selinux_snapperd_contexts_path() * Modify audit2why analyze function to use loaded policy * Avoid mounting /proc outside of selinux_init_load_policy() * Fix location of selinuxfs mount point * Only mount /proc if necessary * procattr: return einval for <= 0 pid args * procattr: return error on invalid pid_t input - Dropped * libselinux-2.2-ruby.patch * libselinux-proc-mount-only-if-needed.patch * python-selinux-swig-3.10.patch ==== libsemanage ==== Version update (2.5 -> 2.6) Subpackages: libsemanage-migrate-store libsemanage1 - Update to version 2.6. Notable changes: * genhomedircon: do not suppress logging from libsepol * genhomedircon: use userprefix as the role for homedir * Fix bug preventing the installation of base modules * Use pp module name instead of filename when installing module * genhomedircon: remove hardcoded refpolicy strings * genhomedircon: add support for %group syntax * genhomedircon: generate contexts for logins mapped to the default user * Validate and compile file contexts before installing * Swap tcp and udp protocol numbers * genhomedircon: %{USERID} and %{USERNAME} support and code cleanups ==== libsepol ==== Version update (2.5 -> 2.6) Subpackages: libsepol-devel libsepol1 - Update to version 2.6. Notable changes: * Add support for converting extended permissions to CIL * Create user and role caches when building binary policy * Check for too many permissions in classes and commons in CIL * Fix xperm mapping between avrule and avtab * Produce more meaningful error messages for conflicting type rules in CIL * Change which attributes CIL keeps in the binary policy * Warn instead of fail if permission is not resolved * Ignore object_r when adding userrole mappings to policydb * Correctly detect unknown classes in sepol_string_to_security_class * Fix neverallowxperm checking on attributes * Only apply bounds checking to source types in rules * Fix CIL and not add an attribute as a type in the attr_type_map * Fix extended permissions neverallow checking * Fix CIL neverallow and bounds checking * Add support for portcon dccp protocol ==== libsoup ==== Subpackages: libsoup-2_4-1 libsoup-lang typelib-1_0-Soup-2_4 - Use python3 during build: + Add libsoup-tld-parser-py3.patch: Use python3 for tld-parser. + Add python3-base BuildRequires. ==== libtirpc ==== Version update (1.0.1 -> 1.0.2) Subpackages: libtirpc-netconfig libtirpc3 libtirpc3-32bit - Add COPYING.GPLv2 and install Licenses for GPLv2 code. - 005-missing-includes.patch: add missing includes to make headers compatible to sunrpc. - Update to version 1.0.2 - 002-old-automake.patch: not needed anymore - 005-libtirpc-1.0.2-rc1.patch: dropped - 006-Remove-old-meanwhile-wrong-comment-about-FD_SETSIZE-.patch: removed, merged upstream - 007-Change-rtime-function-to-use-poll-instead-of-select.patch: removed, merged upstream - 008-Add-parameters-to-local-prototypes-to-fix-compiler-w.patch: removed, merged upstream - 009-makefd_xprt-checks-that-the-filedesriptor-is-lower-t.patch: removed, merged upstream - 010-The-goto-again-statement-was-an-left-over-from-the-p.patch: removed, merged upstream - 012-libtirpc-needs-rpcsvc-nis.h-for-compiling-but-does-n.patch: removed, merged upstream - 013-If-we-don-t-compile-in-YP-support-don-t-include-YP-h.patch: removed, merged upstream - 014-Add-des_crypt.c-and-des_impl.c-to-become-independent.patch: removed, merged upstream - 015-Fix-includes-to-compile-without-deprecated-glibc-fun.patch: removed, merged upstream - patch6_7.diff: obsolete - Replace explicit_bzero.patch with 004-replace-bzero-with-memset.patch from git - Rename libtirpc-new-path-rpcbindsock.patch to 001-new-rpcbindsock-path.patch - 003-rpc-types.patch: Add some typedefs to rpc/types.h to allow applications be compiled with -std=iso9899:1990 ==== libzypp ==== Version update (17.0.3 -> 17.0.4) - Stop BuildRequire dropped boost-devel (bsc#1062782) - version 17.0.4 (0) ==== ltrace ==== - Fix overactive post-build-checks tripping over some testsuite compile warnings. Adds ltrace-fix-build.patch . ==== lzo ==== - Add pkgconfig BuildRequires: allow the rpm dep generator to inspect the shipped .pc file and produce requires/provides. - Update to 2.10 * Improve CMake build support. * Add support for pkg-config. * Do not redefine "snprintf" so that the examples build with MSVC 2015. * Assorted cleanups. - Cleanup spec file with spec-cleaner - Update to 2.09 * Work around gcc bug #64516 that could affect architectures like armv4, armv5 and sparc. - enable lzo-devel-static package build - update to 2.08 (bnc#883947) CVE-2014-4607 - Updated the Autoconf scripts to fix some reported build problems. - Added CMake build support. - Fixed lzo_init() on big-endian architectures like Sparc. - additional changes in 2.07 * Fixed a potential integer overflow condition in the "safe" decompressor variants which could result in a possible buffer overrun when processing maliciously crafted compressed input data. Fortunately this issue only affects 32-bit systems and also can only happen if you use uncommonly huge buffer sizes where you have to decompress more than 16 MiB (> 2^24 bytes) untrusted compressed bytes within a single function call, so the practical implications are limited. POTENTIAL SECURITY ISSUE. CVE-2014-4607. * Removed support for ancient configurations like 16-bit "huge" pointers - LZO now requires a flat 32-bit or 64-bit memory model. * Assorted cleanups. - Added url as source. Please see http://en.opensuse.org/SourceUrls - license update: GPL-2.0+ No GPL-2.0 "only" licenses found in the package - move libraries back to %{_libdir}, /usr merge project - Update to version 2.06 * Some minor optimizations for big-endian architectures. * Fixed overly strict malloc() misalignment check in examples. - Update to version 2.05 * Converted the configure system to non-recursive Automake. * Applied some overdue speed optimizations for modern x86/x64 architectures and current compilers like gcc 4.6 and MSVC 2010. - Fix specfile (remove deleted lzo-2.03-alias.patch). - update to 2.0.4 * Fixed a gcc-4.5 aliasing issue in lzo_init(). * Updated the configure system. * Assorted cleanups. - dropped lzo-2.03-alias.patch: solved differently upstream - dropped debug_package_requires define - Use GCC visibility. - fix aliasing problems - add baselibs.conf as a source - enable parallel build ==== man ==== - Make /var/ache/man a real directory as in system-user-man the directory is gone ==== mariadb ==== Version update (10.2.10 -> 10.2.11) Subpackages: libmysqld19 mariadb-client mariadb-errormessages - update to 10.2.11 GA * release notes and changelog: * https://mariadb.com/kb/en/library/mariadb-10211-release-notes/ * https://mariadb.com/kb/en/library/mariadb-10211-changelog/ - pack additional mroonga/groonga files - change default charset to utf8mb4 for full Unicode support [fate#324329] - remove mariadb-10.2.10-wsrep_sst_common.patch as it's no longer needed ==== mc ==== Version update (4.8.19 -> 4.8.20) Subpackages: mc-lang - Update to Version 4.8.20 * * Core * Rename key bindings: - [main].PanelListingSwitch -> [panel].CycleListingFormat - [main].PanelListingChange -> [main].SetupListingFormat * Speed up of UTF-8 normalization for frequent cases (#3616) * * VFS * extfs helpers tester: - diff of failed tests is now included in output to ease bug reporting (#3784) * * Editor * Syntax: - ES2015 support (#3793) - TypeScript support (#3794) - Ada 95 updates (#3804) - Apache Hive QL support (#3828) - SQL & PHP keyword updates (MidnightCommander/mc#129) - Simplification of case insensitive file name patterns in /usr/share/mc/syntax/Syntax file (#3829) - Markdown (initial support) (#3864) - Protocol Buffers and gRPC support (#3868) * Add %c (cursor offset from BOF) support for user menu macros (#3867) * * Viewer * * Diff viewer * * Misc * Unify curses initialization for various curses implementations (#3697) * Highlight txz extension as archive like tgz, etc. (#3782) * Add new media extensions to filehighlight.ini (#3834) * * Fixes * Wrong --help message for mcview, mcedit and mcdiff (#3805) * Compression from menu broken due to bad quoting (#3840) * --with-homedir gives "yes" as config directory (#3836) * External panelize: opening a file with an absolute path fails (#2942) * Filter isn't cleared when entering empty string (#3813) * Panelization is not kept while switching panel listing mode (#3810) * Cannot tab out of a QuickView panel (#3815) * Cannot use the F10 key in a QuickView panel (#3816) * Wromg INPUT_COMPLETE_CD flag handling in the QuickDialog? engine (#3870) * mcview: file interpreted as latin1 instead of utf8 (#3783) * mcview: incomplete read of filtering data (#3817) * mcview: search doesn't grow file as much as needed (#3819, #3855) * mcview: goto doesn't grow file as much as needed (#3826) * mcview: quick view panel: crash on slow startup while switching panel mode (#3846) * mcedit: fix broken encoding into UTF-8 for 8-bit displays (#3843) * mcedit: incorrect %f macro substitution in the user menu (#3861) * man pages: wrong paths of mc.hint and mc.hlp (#3806) * subshell: fix broken tcsh 6.20+ cd escaping (#3852) * VFS: incremental tar doesn't contain empty directories (#2297) * VFS: incremental tar: wrong directories owner for tar --numeric-owner -g (#3709) * VFS: timestamps not being preserved due to uninitialized struct stat st_[acm]tim.tv_nsec (#3821) * VFS: ftp: can't retrieve password from .netrc when user is in URL (#3869) * VFS: tests: locale issue causing helpers using 'sort' to fail (#3787) * VFS: tests: unportable 'echo' use causing one rpm helper test to fail (#3786) * Spelling errors in the manual page (#3839) ==== mozjs52 ==== - Added support for ICU and data file. - Added mozilla-s390-bigendian.patch to enable bigendian support for s390 machines. - Added xulrunner-24.0-s390-inlines.patch for s390 builds. ==== mpg123 ==== Version update (1.25.7 -> 1.25.8) Subpackages: libmpg123-0 mpg123-openal mpg123-pulse - Update to version 1.25.8 mpg123: * Also disable cursor/video games for empty TERM (not just unset and dumb). libmpg123: * Accept changing mode extension bits when looking for next header for detecting free-format streams (bug 257). * Fix compute_bpf() for free format streams (needed to estimate track length and working fuzzy seeking in absence of an Info tag). ==== ncurses ==== Subpackages: libncurses6 ncurses-devel ncurses-utils tack terminfo terminfo-base - Add ncurses patch 20171118 + add a note to curs_addch.3x on portability. + add a note to curs_pad.3x on the origin and portability of pads. + improve manpage description of getattrs (report by Midolikawa H). + improve manpage macros (prompted by discussion in Debian #880551. + reviewed test-programs using KEY_RESIZE, made fixes to test/worm.c + add a "-d" option to picsmap for default-colors. + modify old terminology entry and a few other terminal emulators to account for xon -TD + correct sgr string for tmux, which used screen's "standout" code rather than the standard code (patch by Roman Kagan) + correct sgr/sgr0 strings in a few other cases reported by tic, making those correspond to the non-sgr settings where they differ, but otherwise use ECMA-48 consistently: jaixterm, aixterm, att5420_2, att4424, att500, decansi, d410-7b, dm80, hpterm, emu-220, hp2, iTerm2.app, mterm-ansi, ncrvt100an, st-0.7, vi603, vwmterm -TD + build-fix for diagnostics warning in lib_mouse.c for pre-5.0 versions of gcc which did not recognize the diagnostic "push" pragma (patch by Vassili Courzakis). - Add ncurses patch 20171111 + add "op" to xterm+256setaf -TD + reviewed terminology 1.0.0 -TD + reviewed st 0.7 -TD + suppress debug-package for ncurses-examples rpm build. - Add ncurses patch 20171104 + check for interrupt in color-pair initialization of dots_curses.c, dots_xcurses.c + add z/Z zoom feature to test/ncurses.c C/c screens. + add '<' and '>' commands to test/ncurses.c S/s screens, to better test off-by-ones in the overlap/copywin functions. ==== nfs-utils ==== Subpackages: nfs-client nfs-doc nfs-kernel-server - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== permissions ==== Version update (20171106 -> 20171129) - fillup is required for post, not pre installation - Cleanup spec file with spec-cleaner - Drop conditions/definitions related to old distros - Update to version 20171129: * permissions: adding gvfs (bsc#1065864) * Allow setgid incingacmd on directory /run/icinga2/cmd bsc#1069410 * Allow fping cap_net_raw (bsc#1047921) - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) - Update to version 20171121: * - permissions: adding kwayland (bsc#1062182) ==== python3-base ==== Subpackages: libpython3_6m1_0 python3-idle - Install 2to3-%{python_version} executable (override defattr of the -tools package). 2to3 (unversioned) is a symlink and does not carry permissions (bsc#1070853). ==== startup-notification ==== - Replace xorg-x11-devel BuildRequires with pkgconfig(xcb), pkgconfig(xcb-aux), pkgconfig(xcb-event) and pkgconfig(x11-xcb). ==== sysconfig ==== Version update (0.84.1 -> 0.84.2) Subpackages: sysconfig-netconfig - version 0.84.2 - spec: revert change to use _fillupdir in update hook from < 0.80 - merged fixes of the the fillup templates logic and macro in configure.ac by Marcus Meissner - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== system-users ==== Subpackages: system-group-hardware system-group-wheel system-user-bin system-user-daemon system-user-games system-user-lp system-user-mail system-user-man system-user-news system-user-nobody system-user-upsd system-user-uucp system-user-wwwrun - Change home directory of user man to /var/lib/empty. Home directories below /var/cache are by definition insecure and a bad idea. ==== tomcat ==== Version update (8.0.44 -> 9.0.2) Subpackages: tomcat-admin-webapps tomcat-el-3_0-api tomcat-jsp-2_3-api tomcat-lib tomcat-webapps - Update to Tomcat 9.0.2: * Major update for tomcat8 from tomcat9 * For full changelog please read upstream changes at: + http://tomcat.apache.org/tomcat-9.0-doc/changelog.html * Rename all tomcat-8.0-* files to tomcat-9.0-* - Changed patches: * Deleted: tomcat-8.0-bootstrap-MANIFEST.MF.patch * Deleted: tomcat-8.0-sle.catalina.policy.patch * Deleted: tomcat-8.0-tomcat-users-webapp.patch * Deleted: tomcat-8.0.33-JDTCompiler-java.patch * Deleted: tomcat-8.0.44-javadoc.patch * Deleted: tomcat-8.0.9-property-build.windows.patch * Added: tomcat-9.0-JDTCompiler-java.patch * Added: tomcat-9.0-bootstrap-MANIFEST.MF.patch * Added: tomcat-9.0-javadoc.patch * Added: tomcat-9.0-sle.catalina.policy.patch * Added: tomcat-9.0-tomcat-users-webapp.patch - Renamed subpackage tomcat-3_1-api to tomcat-4_0-api to reflect the new Servlet API version. - Commented out JAVA_HOME in /etc/tomcat/tomcat.conf - Added "tomcat-" prefix to lib symlinks under /usr/share/java to avoid file conflicts with servletapi5 and geronimo-specs - Fixed wrong %ghost file paths for alternatives symlinks - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) - Build with JDK 8 to fix runtime errors when running with JDK 7 and 8 - Fix tomcat-digest classpath error (bsc#977410) - Fix packaged /etc/alternatives symlinks for api libs that caused rpm -V to report link mismatch (bsc#1019016) - update to 8.0.47 http://tomcat.apache.org/tomcat-8.0-doc/changelog.html * Fixed CVE: - CVE-2017-12617 - rebase tomcat-8.0-sle.catalina.policy.patch ==== webkit2gtk3 ==== Subpackages: libjavascriptcoregtk-4_0-18 libwebkit2gtk-4_0-37 libwebkit2gtk3-lang typelib-1_0-JavaScriptCore-4_0 typelib-1_0-WebKit2-4_0 webkit2gtk-4_0-injected-bundles - Explicitly buildrequire python2-xml: the build system is (for now) hard locked on python2 and relies on the presence of python2-xml (used to be pulled in by glib2-devel in the past). ==== wicked ==== Version update (0.6.41 -> 0.6.42) Subpackages: libwicked-0-6 wicked-service - version 0.6.42 - spec: use new _fillupdir macro for fillup-templates (boo#1069468) - dhcp: clear hostname on lease recovery/reboot (bsc#1057007) - firewall: add firewalld and zone support (fate#320794) - ifconfig: cleanup slaves before enslaving (bsc#1036675) - ethtool: add rxvlan, txvlan, ntuple and rxhash offloads - ethtool: handle channel parameters (bsc#1043883) ==== wireshark ==== Version update (2.4.2 -> 2.4.3) Subpackages: libwireshark10 libwiretap7 libwscodecs1 libwsutil8 wireshark-ui-qt - Wireshark 2.4.3: This release fixes minor vulnerabilities that could be used to trigger dissector crashes by making Wireshark read specially crafted packages from the network or capture files (bsc#1070727): * CVE-2017-17084: IWARP_MPA dissector crash (wnpa-sec-2017-47) * CVE-2017-17083: NetBIOS dissector crash (wnpa-sec-2017-48) * CVE-2017-17085: CIP Safety dissector crash (wnpa-sec-2017-49) * Further bug fixes and updated protocol support as listed in: https://www.wireshark.org/docs/relnotes/wireshark-2.4.3.html ==== wmctrl ==== - BuildRequire pkgconfig(x11) and pkgconfig(xmu), not xorg-x11-devel. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

Re: [opensuse-factory] Tumbleweed - Libreoffice 6.0 (a beta1 really?)
by Bruno Friedmann 09 Dec '17

09 Dec '17

On samedi, 9 décembre 2017 00.25:02 h CET Thorsten Behrens wrote: > Bruno Friedmann wrote: > > I'm afraid with the incoming of qt5 integration, quite a big number > > of bugs will be discovered, but those should be handled in our devel > > repo no ? > > For the avoidance of doubt - the kde5/qt5 work in LibreOffice is > currently in very early stages. I would caution everyone not to expect > anything production-ready for 6.0 (nor recommend any maintainer to > enable it). > > Cheers, > > -- Thorsten Thanks for the clarification. A good way to test my patience :-) -- Bruno Friedmann Ioda-Net Sàrl www.ioda-net.ch Bareos Partner, openSUSE Member, fsfe fellowship GPG KEY : D5C9B751C4653227 irc: tigerfoot -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] avr-gcc cannot find avr-as
by Frank Kunz 08 Dec '17

08 Dec '17

Sorry, I'm not sure if that is the correct list for this issue, but I haven't found a proper one. I have installed the packages avr-libc, cross-avr-binutils and cross-avr-gcc from the http://download.opensuse.org/repositories/CrossToolchain:/avr/openSUSE_Tumb… repository. When I try to compile a simple main.c with avr-gcc: int main(void) { for(;;); } I get a avr-gcc -o file main.c as: unrecognized option '-mmcu=avr2' when I run the command with strace I get: stat("/opt/cross/libexec/gcc/avr/5.4.0/as", 0x7ffe2ea0b150) = -1 ENOENT (No such file or directory) stat("/opt/cross/libexec/gcc/avr/5.4.0/as", 0x7ffe2ea0b150) = -1 ENOENT (No such file or directory) stat("/opt/cross/libexec/gcc/avr/as", 0x7ffe2ea0b150) = -1 ENOENT (No such file or directory) stat("/opt/cross/lib/gcc/avr/5.4.0/as", 0x7ffe2ea0b150) = -1 ENOENT (No such file or directory) stat("/opt/cross/lib/gcc/avr/as", 0x7ffe2ea0b150) = -1 ENOENT (No such file or directory) stat("/opt/cross/lib/gcc/avr/5.4.0/../../../../avr/bin/avr/5.4.0/as", 0x7ffe2ea0b150) = -1 ENOENT (No such file or directory) stat("/opt/cross/lib/gcc/avr/5.4.0/../../../../avr/bin/as", 0x7ffe2ea0b150) = -1 ENOENT (No such file or directory) then the PATH is searched for an "as" executable and finally it ends up at /usr/bin/as, which is the host assembler that does not understand the '-mmcu=avr2' option. The problem seems to be that the avr-binutils are installed under /usr/avr, but the avr-gcc is under /opt/cross-avr. The "avr-" binaries are in the PATH, but avr-gcc is not searching for them. Is this a bug? Or is there a configuration to get that working? Br, Frank -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 15

Re: [opensuse-factory] Bluetooth keeps failing in Tumbleweed, including the current version 20171125, Linux 4.14.1-1-default #1 SMP PREEMPT
by Foolish Ewe 07 Dec '17

07 Dec '17

Hello All: Thank you Knurpht, I'm hoping this is the fix. Following up in case anybody else sees simillar symptoms. So far my bluetooth has not failed. I'll post an update if it does, but I'm guardedly optimistic that Knurpht's trick helped. Bill From: Foolish Ewe <foolishewe(a)hotmail.com> Sent: Friday, December 1, 2017 8:54 AM To: knurpht(a)opensuse.org Subject: Re: [opensuse-factory] Bluetooth keeps failing in Tumbleweed, including the current version 20171125, Linux 4.14.1-1-default #1 SMP PREEMPT Hi Knurpht: I rolled back bumblebee and zypper dup to get the latest changes, but had a bluetooth failure before taking your advice. Here is my attempt to follow this advice, I am now awaiting the outcome. As per your recommendation I looked at lsusb $lsusb Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 8087:0a2b Intel Corp. Bus 001 Device 002: ID 064e:3401 Suyin Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub $lsusb -t /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/12p, 480M |__ Port 5: Dev 2, If 1, Class=Video, Driver=uvcvideo, 480M |__ Port 5: Dev 2, If 0, Class=Video, Driver=uvcvideo, 480M |__ Port 7: Dev 3, If 0, Class=Wireless, Driver=btusb, 12M |__ Port 7: Dev 3, If 1, Class=Wireless, Driver=btusb, 12M I then blacklisted the bluetooth device in /etc/default/tlp: # Exclude listed devices from USB autosuspend (separate with spaces). # Use lsusb to get the ids. # Note: input devices (usbhid) are excluded automatically #USB_BLACKLIST="1111:2222 3333:4444" USB_BLACKLIST="1d6b:0002 1d6b:0003 064e:3401 8087:0a2b" With best regards: Bill From: Knurpht - Gertjan Lettink <knurpht(a)opensuse.org> Sent: Thursday, November 30, 2017 5:03 PM To: opensuse-factory(a)opensuse.org Subject: Re: [opensuse-factory] Bluetooth keeps failing in Tumbleweed, including the current version 20171125, Linux 4.14.1-1-default #1 SMP PREEMPT Op donderdag 30 november 2017 17:52:33 CET schreef Foolish Ewe: > Hello Knurpht: > > I had my laptop charging overnight and bluetooth did not fail, but as an > experiment I removed the charging cable and the bluetooth went out shorty > afterwards, so perhaps you and Arjen are on to something? I've rebooted > since, while plugged in I see. Please also try this: Use lsusb to find the manufacturor and device ID Now edit /etc/default/tlp ( needs root permissions ) and search for 'USB_BLACKLIST='. , and add the manufacturor and device ID between quotes, like below. USB_BLACKLIST="04e8:3292" for example. This should prevent the USB device to be switched off by power saving settings. > > Before pulling the power cable I saw: > > $ sudo rfkill list > [sudo] password for root: > 0: phy0: Wireless LAN > Soft blocked: no > Hard blocked: no > 5: hci0: Bluetooth > Soft blocked: no > Hard blocked: no > -- Gertjan Lettink, a.k.a. Knurpht openSUSE Board Member openSUSE Forums Team -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] Archeology
by H.Merijn Brand 07 Dec '17

07 Dec '17

For you amusement ... I had a question to check what version of perl was shipped with what release of SUSE/openSUSE, so I did some digging Everything I could trace on my CD/DVD's I found info for SUSE versions 5.1, 5.2, 5.3, 6.1, 8.2, 9.1, 9.2, 9.3, 10.0, 10.1, 10.2, 10.3, 11.1, 11.2, 11.3, 11.4, 12.1, 12.2, 12.3, 13.1, 13.2, 42.1, 42.2, 42.3, 15.0 & TW So I'm still missing 6.0, 6.[234]?, 7.x, 8.0, 8.1, 8.[345]?, 9.0 and 11.0 My 11.0 CD just had the boot, no packages :( TumbleWeed rolling 5.26.1 Leap 15.0 . 5.26.1 Leap 42.3 2017-07-26 5.18.2 Leap 42.2 2016-11-16 5.18.2 Leap 42.1 Malachite 2015-11-04 5.18.2 13.2 Harlequin 2014-11-04 5.20.1 13.1 Bottle 2013-11-19 5.18.1 12.3 Dartmouth 2013-03-13 5.16.2 12.2 Mantis 2012-09-05 5.16.0 12.1 Asparagus 2011-11-16 5.14.2 11.4 Celadon 2011-03-01 5.12.3 11.3 Teal 2010-07-15 5.12.1 11.2 Emerald 2009-11-12 5.10.0 11.1 2008-12-18 5.10.0 11.0 2008-06-19 10.3 2007-10-04 5.8.8 10.2 Basilisk Lizard 2006-12-07 5.8.8 10.1 Agama Lizard 2006-05-11 5.8.8 10.0 Prague 2005-10-06 5.8.7 9.3 2005-04-15 5.8.6 9.2 2004-10-25 9.1 2004-04-23 5.8.3 8.2 2003-03-17 5.8.0 6.1 1999-04-20 5.005_02 5.3 1998-08-21 5.004_04 5.2 1998-03-12 5.004_04 5.1 1997-12-12 5.004_04 SLE-12 SP3 5.18.2 SLE-11 SP4 5.10.0 SLE-11 SP3 5.10.0 SLE-11 SP2 5.10.0 SLE-11 SP1 5.10.0 SLE-11 5.10.0 I've done a Pull Request to update http://www.cpan.org/ports/binaries.html#suse -- H.Merijn Brand http://tux.nl Perl Monger http://amsterdam.pm.org/ using perl5.00307 .. 5.27 porting perl5 on HP-UX, AIX, and openSUSE http://mirrors.develooper.com/hpux/ http://www.test-smoke.org/ http://qa.perl.org http://www.goldmark.org/jeff/stupid-disclaimers/

3 4

[opensuse-factory] kio_sftp crashes since OpenSSL 1.1.0 switch
by Martin Herkt 07 Dec '17

07 Dec '17

It seems KDE is still partially built against OpenSSL 1.0.0 libraries, but libssh is meant to use 1.1.0: #0 0x0000000000000021 in ?? () #1 0x00007f1446774f9a in EVP_MD_CTX_cleanup () from /usr/lib64/libcrypto.so.1.0.0 #2 0x00007f14466e321f in HMAC_CTX_cleanup () from /usr/lib64/libcrypto.so.1.0.0 #3 0x00007f1446ad493c in hmac_final () from /usr/lib/libssh.so.4 #4 0x00007f1446adecef in packet_encrypt () from /usr/lib/libssh.so.4 #5 0x00007f1446ade018 in packet_send2 () from /usr/lib/libssh.so.4 #6 0x00007f1446ade15a in packet_send () from /usr/lib/libssh.so.4 #7 0x00007f1446ac994d in ssh_service_request () from /usr/lib/libssh.so.4 #8 0x00007f1446abe3be in ssh_userauth_request_service () from /usr/lib/libssh.so.4 #9 0x00007f1446abea87 in ssh_userauth_none () from /usr/lib/libssh.so.4 #10 0x00007f1446d4422d in ?? () from /usr/lib64/qt5/plugins/kf5/kio/sftp.so #11 0x00007f1446d415fa in ?? () from /usr/lib64/qt5/plugins/kf5/kio/sftp.so #12 0x00007f1446d42340 in ?? () from /usr/lib64/qt5/plugins/kf5/kio/sftp.so #13 0x00007f144fb90166 in KIO::SlaveBase::dispatch(int, QByteArray const&) () from /usr/lib64/libKF5KIOCore.so.5 #14 0x00007f144fb89ba6 in KIO::SlaveBase::dispatchLoop() () from /usr/lib64/libKF5KIOCore.so.5 #15 0x00007f1446d4973b in kdemain () from /usr/lib64/qt5/plugins/kf5/kio/sftp.so #16 0x000055a1223f4a1f in ?? () #17 0x000055a1223f5d4c in ?? () #18 0x000055a1223f66bf in ?? () #19 0x000055a1223f156c in ?? () #20 0x00007f1455cd4f4a in __libc_start_main () from /lib64/libc.so.6 #21 0x000055a1223f219a in _start () $ ldd /usr/lib64/libssh.so.4 | grep libcrypto libcrypto.so.1.1 => /usr/lib64/libcrypto.so.1.1 (0x00007fe887201000) $ ldd /usr/lib64/qt5/plugins/kf5/kio/sftp.so | grep libcrypto libcrypto.so.1.0.0 => /usr/lib64/libcrypto.so.1.0.0 (0x00007f35c0026000) libcrypto.so.1.1 => /usr/lib64/libcrypto.so.1.1 (0x00007f35bd4b7000)

1 1

[opensuse-factory] tumbleweed libreoffice-kde
by Simon Becherer 07 Dec '17

07 Dec '17

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, because its now some time in past since libreoffice-kde was removed. https://bugzilla.opensuse.org/show_bug.cgi?id=1064660, so i like to ask if at all, and if then when will libreoffice-kde again avalable? the dialogs now are not really handy in comparsion to the libreoffice-kde dialogs. (as bruno friedmann also wrote in the bugreport: " Isn't a way to get a port to qt5 of this libreoffice-kde4 ? Like a nice subject for a gosc, or hackweek ;-) For me managing files (save, open) is almost impossible with the gtk things. It doesn't respect the workflow and design in place of the whole environment.") regards, simoN - -- B e c h e r e r GmbH Sondermaschinenbau Mauermatten Strasse 22 79183 Waldkirch Germany Tel.: (+49) (0)7681 3134 Fax: (+49) (0)7681 4378 Mail: info(a)becherer.de Web: www.becherer.de USt-ID-Nr.: DE 814912198 Registergericht: Freiburg HRB 701860 Geschäftsführer: Dipl.-Ing. (FH), EWE Simon H. Becherer Gerichtsstand / Sitz: Waldkirch Es gelten ausschließlich unsere allgemeinen Liefer- und Zahlungsbedingungen / Einkaufsbedingungen: www.becherer.de/AGB -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iQIcBAEBAgAGBQJaKDN5AAoJEOuDxDCJWQG+YS8QAKKNCHojhzAfJYCnsDVJ8Jmi RTbAujuVPM3bdOU5wxQUhgYarEvPVJLFBIFSK8jAe4WFvG1jLxCnB5PfkxxtWLqC CcdYjnmyMXGSs5eisMWfGBWVeY8eDhKtp9bsVPqN58vb9ltkcnMRMLqGDtu5qedN yl7/5jWu8INqLWSEKvV3oriODJkE96zbzWSW8a7WlNX/1VGu99atSA9OLR8ZQUpx oEMTKvcRHP4MxCVZaqXUXxMX/3inf6GFmALWslDnO3KcFJADwBGax1sNfgIa0YLm qg9E8ujSRM716AnazOtJznk5+oDkogg+Tft2Ew1bblsol05oxrJSSjl6CBimCEJn AydWZxPdsauF5AjDFSc8nCYp+7YbqckhyNlYe+Oj9Aaj5BIeKCBHQyig23K7FR8S 7MCIYIKhobBCPVlKiiWqjVJLZMcE6yD+Q4njVO/UwWgIhQeHZP9kJsla07c3rx9R owy6eB4blSxEZc6DV4qQg6RIpWl1GiHCx4ZNCk2wfmXxXnogrWuWf4xpsma2PcRE aR1YR2rOb1Q+owqBSJN0SZfj9LlHXvXDamZKeFXjJYFDKYsNFrR/2oiy7RAVKYp+ DFD2V3DWVn9uo9o0pm6aRcxmNtDSZqe3kUc44muCOWYg1EWCklZEVF0VcaygzIN4 3iRmbirGsmgo4a1VXB2X =urr8 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] Is anyone else seeing
by Foolish Ewe 07 Dec '17

07 Dec '17

Hello all: I'm getting a message that the packman repomd.xml is unsigned for tumbleweed, is anybody else seeing this? Is it some local corruption or is something else going on here? $ sudo zypper lr -d Repository priorities are without effect. All enabled repositories share the same priority. # | Alias | Name | Enabled | GPG Check | Refresh | Priority | Type | URI | Service ---+----------------------------------------+-----------------------------+---------+-----------+---------+----------+--------+--------------------------------------------------------------------------------+-------- 1 | X11:Bumblebee | X11:Bumblebee | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/repositories/X11:/Bumblebee/openSUSE_Tumblewee… | 2 | download.nvidia.com-tumbleweed | nVidia Graphics Drivers | Yes | (r ) Yes | Yes | 99 | rpm-md | https://download.nvidia.com/opensuse/tumbleweed | 3 | games | games | Yes | (r ) Yes | No | 99 | rpm-md | http://download.opensuse.org/repositories/games/openSUSE_Tumbleweed/ | 4 | openSUSE-20171101-0 | openSUSE-20171101-0 | No | ---- | ---- | 99 | yast2 | hd:///?device=/dev/disk/by-id/usb-SanDisk_Ultra_4C530001080721109210-0:0-part2 | 5 | opensuse-guide.org-openSUSE_Tumbleweed | libdvdcss repository | Yes | (r ) Yes | Yes | 99 | rpm-md | http://opensuse-guide.org/repo/openSUSE_Tumbleweed/ | 6 | packman.inode.at-openSUSE_Tumbleweed | Packman Repository | Yes | (r ) Yes | Yes | 99 | rpm-md | http://packman.inode.at/suse/openSUSE_Tumbleweed/ | 7 | repo-debug | openSUSE-Tumbleweed-Debug | No | ---- | ---- | 99 | NONE | http://download.opensuse.org/debug/tumbleweed/repo/oss/ | 8 | repo-non-oss | openSUSE-Tumbleweed-Non-Oss | Yes | (r ) Yes | Yes | 99 | yast2 | http://download.opensuse.org/tumbleweed/repo/non-oss/ | 9 | repo-oss | openSUSE-Tumbleweed-Oss | Yes | (r ) Yes | Yes | 99 | yast2 | http://download.opensuse.org/tumbleweed/repo/oss/ | 10 | repo-source | openSUSE-Tumbleweed-Source | No | ---- | ---- | 99 | NONE | http://download.opensuse.org/source/tumbleweed/repo/oss/ | 11 | repo-update | openSUSE-Tumbleweed-Update | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/update/tumbleweed/ | $ sudo zypper dup Warning: You are about to do a distribution upgrade with all enabled repositories. Make sure these repositories are compatible before you continue. See 'man zypper' for more information about this command. Retrieving repository 'Packman Repository' metadata --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------[\] Warning: File 'repomd.xml' from repository 'Packman Repository' is unsigned. Note: Signing data enables the recipient to verify that no modifications occurred after the data were signed. Accepting data with no, wrong or unknown signature can lead to a corrupted system and in extreme cases even to a system compromise. Note: File 'repomd.xml' is the repositories master index file. It ensures the integrity of the whole repo. Warning: We can't verify that no one meddled with this file, so it might not be trustworthy anymore! You should not continue unless you know it's safe. File 'repomd.xml' from repository 'Packman Repository' is unsigned, continue? [yes/no] (no): ^C Is this due to some config error on my side or is something else triggering this? With best regards: Bill -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 1

[opensuse-factory] Release tools development highlights: 2017: w43-44, w45-46, and w47-48
by Jimmy Berry 07 Dec '17

07 Dec '17

Going forward I will be publishing bi-weekly posts covering openSUSE release tool development and related topics. To get started I played a bit of catch-up and published highlights for the last 6 weeks. The goal is to provide insight into the work that goes into the tools used to create the openSUSE release process. I also plan to write in-depth posts on specific topics of interest and likely some high level overviews of the process as a whole. - 2017w43-44: repo-checker for Leap and full OBS for tooling tests [1] - 2017w45-46: metrics.o.o deployed, TW snapshots, and repo-checker skips openQA [2] - 2017w47-48: Tumbleweed snapshots in the press [3] If you would rather be notified via RSS one can use the feed [4]. [1] http://release-tools.opensuse.org/2017/11/03/w43-44.html [2] http://release-tools.opensuse.org/2017/11/17/w45-46.html [3] http://release-tools.opensuse.org/2017/12/01/w47-48.html [4] http://release-tools.opensuse.org/feed.xml -- Jimmy -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] Tumbleweed Snapshots Update
by Jimmy Berry 07 Dec '17

07 Dec '17

I wrote a short followup after the announcement [1] and created an introduction video [2] in an attempt to better explain the concept and purpose. [1] http://release-tools.opensuse.org/2017/12/06/Tumbleweed-Snapshots-Update.ht… [2] https://www.youtube.com/watch?v=CSXRreUjiIc -- Jimmy -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0