https://bugzilla.novell.com/show_bug.cgi?id=401896
User abittner@stud.fh-heilbronn.de added comment
https://bugzilla.novell.com/show_bug.cgi?id=401896#c2
andreas bittner changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |abittner@stud.fh-heilbronn.de
--- Comment #2 from andreas bittner 2008-06-19 19:55:20 MDT ---
hello there, i just had some trouble reaching some remote 10.3 box tonight.
it has also been undergoing updates/patches and i was thinking that when it
didnt came back up after reboot it was this bug.
maybe its related. at the physical box itself in the console the bootup process
(init scripts) were stalled with some errors regarding network.
apparently (box has 4 pci nics) some pci network cards got renamed in
random/crazy ways. all of a sudden there was no eth2, but some eth1_rename
(pending?) and such. thus the box wasnt reachable from the inet and such.
this was a clean 10.3 just setup recently some weeks ago, nothing fancy and all
the latest (except for some small patch and the latest kernel update) patches
applied.
so after todays kernel update it never came back up corrently.
strangely enough i didnt really touch the box at first, although i wanted to
actually test acpi=off after this error to see if with this setting the pci
nics would come back up normally but i first decided to see if it was booting
again with this renaming/network failure.
oddly it came back up online this time normally as before this kernel update.
so now i cannot tell if this was a coincidence or a rare bug/behaviour or if i
might still run into this network renaming errors. and if this is related to
todays kernel update or if this bug is present in all 10.3 kernels or how i can
figure this out.
i have saved the boot.omsg with the errorneous renaming logentries.
any more hints needed? do we need to file a separate bugreport from this?
currently:
Linux box 2.6.22.18-0.2-default #1 SMP 2008-06-09 13:53:20 +0200 i686 i686 i386
GNU/Linux
--------------
<6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<6>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20
<4>PCI: Enabling device 0000:02:0a.0 (0014 -> 0017)
<6>ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
<4>3c59x: Donald Becker and others.
<6>0000:02:0a.0: 3Com PCI 3c905B Cyclone 100baseTx at f1184000.
<4>PCI: Enabling device 0000:02:0b.0 (0014 -> 0017)
<6>ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 17
<6>0000:02:0b.0: 3Com PCI 3c905B Cyclone 100baseTx at f1198000.
<6>b44.c:v1.01 (Jun 16, 2006)
<4>PCI: Enabling device 0000:02:05.0 (0004 -> 0006)
<6>ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 20 (level, low) -> IRQ 21
<6>eth2: Broadcom 4400 10/100BaseT Ethernet 00:0c:6e:1a:57:08
<4>PCI: Enabling device 0000:02:0c.0 (0014 -> 0017)
<6>ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 21
<6>eth2 renamed to eth2_rename
<6>0000:02:0c.0: 3Com PCI 3c905B Cyclone 100baseTx at f1182000.
<6>ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 23
<6>0000:02:0d.0: 3Com PCI 3c905C Tornado at f11c2000.
<6>eth0 renamed to eth0_rename
<6>eth3 renamed to eth4
<6>eth1 renamed to eth1_rename
<6>udev: renamed network interface eth3 to eth4
<6>eth2_rename renamed to eth0
<6>udev: renamed network interface eth2_rename to eth0
<6>eth0_rename renamed to eth1
<6>udev: renamed network interface eth0_rename to eth1
<6>Adding 2096440k swap on /dev/sda1. Priority:-1 extents:1 across:2096440k
<6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
dm-devel@redhat.com
<6>loop: module loaded
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda2, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda7, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda5, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda6, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>eth2 renamed to eth3
<6>udev: renamed network interface eth2 to eth3
<6>AppArmor: AppArmor initialized
<5>audit(1213919681.990:2): type=1505 info="AppArmor initialized" pid=1928
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Thu Jun 19 23:54:01 2008
Creating device nodes with udev
Trying manual resume from /dev/sda1
Invoking userspace resume from /dev/sda1
resume: Could not stat configuration file
resume: libgcrypt version: 1.2.4
Trying manual resume from /dev/sda1
Invoking in-kernel resume from /dev/sda1
Waiting for device /dev/disk/by-id/scsi-SATA_ExcelStor-part3 to appear: ok
fsck 1.40.2 (12-Jul-2007)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0
/dev/disk/by-id/scsi-SATA_ExcelStor_Techn_PV5101Q396CVLB-part3
/dev/disk/by-id/scsi-SATA_ExcelStor-part3: clean, 7197/1036288 files,
571874/2096482 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/disk/by-id/scsi-SATA_ExcelStor-part3
Boot logging started on /dev/tty1(/dev/console (deleted)) at Fri Jun 20
01:54:05 2008
done
Starting udevd udevd-event[1654]: node_symlink: device node '/dev/rtc0' already
exists, link '/dev/rtc' will not overwrite it
udevd-event[1721]: rename_netif: error changing netif name eth2 to eth2_rename:
File exists
done
-----------------------
later network logentries:
----------------------
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
Checking for network time protocol daemon (NTPD): unused
done eth0 device: Broadcom Corporation BCM4401 100Base-T (rev 01)
eth0 IP address: a.b.c.d/27
Checking for network time protocol daemon (NTPD): unused
done eth1 device: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
eth1 IP address: 192.168.1.1/24
Checking for network time protocol daemon (NTPD): unused
done eth3 device: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
Checking for network time protocol daemon (NTPD): unused
done eth4 device: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74)
Checking for network time protocol daemon (NTPD): unused
doneWaiting for mandatory devices: eth2 __NSC__
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
eth2 No interface found
failedSetting up service network . . . . . . . . . . . . . . .
failed
---------------
shutdown entries (?):
-------------------------
Shutting down network interfaces:
eth0 device: Broadcom Corporation BCM4401 100Base-T (rev 01)
done eth1 device: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
done eth1_rename device: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev
30)
No configuration found for eth1_rename
Nevertheless the interface will be shut down.
done eth3 device: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
done eth4 device: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74)
doneShutting down service network . . . . . . . . . . . . . .
done
--------------------
i think there are really some bugs in this kernel-update.
cheers.
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
