![](https://seccdn.libravatar.org/avatar/3035b38ff33cf86f480bb169b8500b80.jpg?s=120&d=mm&r=g)
https://bugzilla.novell.com/show_bug.cgi?id=792172 https://bugzilla.novell.com/show_bug.cgi?id=792172#c0 Summary: acpid: remove thinkpad_acpi driver options Classification: openSUSE Product: openSUSE Factory Version: 12.3 Milestone 1 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: seife@novell.slipkontur.de QAContact: qa-bugs@suse.de CC: hmacht@suse.com Found By: Third Party Developer/Partner Blocker: --- When investigating why my brightness control was working erroneously in xfce, I found out that the thinkpad_acpi driver sent input events for the brightness keys, but the hardware apparently handled the keys by itself. This resulted in userpace also adjusting brightness, resulting in only 5 to 6 usable steps. looking further, I found options thinkpad_acpi experimental=1 hotkey=0xffffff in /etc/modprobe.d/50-thinkpad_acpi.conf. The driver authors recommend to not use the hotkey= parameter but just let the driver decide what to do. susi:~ # cat /proc/acpi/ibm/hotkey status: enabled mask: 0x00ffffff commands: enable, disable, reset, <mask> susi:~ # echo reset > /proc/acpi/ibm/hotkey susi:~ # cat /proc/acpi/ibm/hotkey status: enabled mask: 0x038c7fff commands: enable, disable, reset, <mask> The driver decides to enable a totally different set of hotkeys than 50-thinkpad_acpi.conf And it is actually working much better with the defaults than it was with 0xffffff... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.