May 2013 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] acpid requires systemd?
by Felix Miata 25 Apr '24

25 Apr '24

Can this be true? If so, why? Zypper won't let me upgrade acpid without breakage unless systemd is installed too. I have systemd locked out, as I'd rather test things I can understand in Factory, not major overhaul stuff. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 3

Re: [opensuse-factory] repository priorities with Tumbleweed
by Thomas Langkamp 16 Jul '15

16 Jul '15

> No, please don't confuse people, if you add more repos than just > Tumbleweed you really had better know what you are doing or bad things > can, and will, happen :) I understand. I just would like to add the following to http://en.opensuse.org/Portal:Tumbleweed - between ## is the new stuff: "The only supported method of repo use for Tumbleweed is to have only the main repos (Oss, Non-oss, and Update) and the Tumbleweed repo active. ## If you use more repositorys you have to know how repo-priorities work, but even then Tumblweed does NOT support this ## " It would also be good to move this information to "Special concerns" and to move the whole "Special concerns"-section up. For example "Special Concerns Virtual Machines ... Third Party Drivers ... ## Non-Standard Repos: Only use Oss, Non-oss, and Update combined with the Tumbleweed-Standard repo. Everything else is not supported and might break the system ## " >You do know the legal reasons behind why packman is there, right? Yes. Then I do not whish you personaly to support Packman with TW - I understand now that this is not possible from your perspectivg. But...as the OS community discusses right now if/how to strengthen Tumbleweed... one way would be, that Packman+TW would be supported BY Packman. So I will ask the Packman-guys to do that... I hope this is possible for them. Without Packman Tumbleweed is so ... "anti-multimedia" ;) thanks anyway :D -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

11 18

[opensuse-factory] Export broken for KinfoCenter
by Roger Luedecke 30 Jan '15

30 Jan '15

Export button is greyed out no matter what. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] YaST2 "install/remove" doesn't display solver diagram
by Kyrill Detinov 13 Jan '14

13 Jan '14

Hello. There is a regression in YaST2 *Qt* "install/remove software" module. It doesn't show solver diagram. First, no dependencies on libqdialogsolver. Second, installed libqdialogsolver doesn't help. Reported ages ago. And confirmed. All the info is provided. https://bugzilla.novell.com/show_bug.cgi?id=785431 WBR Kyrill

3 3

Re: [opensuse-factory] Nothing provides /usr/bin/php5
by Sascha Peilicke 11 Jan '14

11 Jan '14

On 12/01/2011 11:44 AM, Kyrill Detinov wrote: > > Hello. > > We have one package affected in standard repo: leechcraft-eiskaltdcpp. > The program itself doesn't require php5. But the package includes > example scripts with shebang '!/usr/bin/php5'. So the package isn't > installable. > > Also I see the same problem with pgfouine from Contrib (written in > PHP) and eiskaltdcpp from filesharing repo. Maybe more in third-party > repositories. > > Can we have symlink /usr/bin/php -> php5 in php5 package? Or affected > packages should be fixed? > Please file a bug against php5 and assign to Cristian Rodríguez. -- Viele Grüße, Sascha -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

Re: [opensuse-factory] SOLVED: postfix does not run
by Christian Boltz 06 Nov '13

06 Nov '13

Hello, Am Freitag, 22. März 2013 schrieb Patrick Shanahan: > /etc/postfix/main.cf had @_some-parameter_@ setting for every > "xxxxxxx_directory =" line. > > After correcting "xxxxxxxx_directory =" settings per my Tumbleweed > machine, postfix appears working correctly. > > This mess probably occurred on installing/upgrading postfix: > postfix-2.9.6-2.1.x86_64 Sun Mar 10 11:14:39 2013 > but the rpm main.cf does not contain "@.............@". This sounds like https://bugzilla.novell.com/show_bug.cgi?id=796162 which should be fixed since some time. I'd guess some older postfix package broke your main.cf. Nevertheless, if you want to be really sure, uninstall postfix, move away /etc/postfix and re-install the postfix package. Regards, Christian Boltz -- Argh, ich wollte heute doch gar nicht mehr siggen! [Michael Hoffmann in dag°] -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Warning: new systemd version landing in Factory
by Frederic Crozat 20 Sep '13

20 Sep '13

Hi all, systemd v202 should be landed in Factory soon. It contains a lot of changes (and bug fixes) compared to v195 we had in 12.3, like (this is an extract from the .changes I wrote): + udev now supports different naming policies for network interface for predictable names (this one is disabled by /usr/lib/tmpfiles.d/network.conf until network team had a chance to look at it and test it). This should be enabled by default in Factory soon (see http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfac… ) This can be also be turned off with kernel command line switch: net.ifnames=0 (when the tmpfiles.d is removed in the near future) + udev gained support for loading additional device properties from an indexed database. %udev_hwdb_update macro should be used by packages adding entries to this database. + Journal gained support for "Message Catalog", indexed database to link up additional information with journal entries. %journal_catalog_update macro should be used by packages adding %entries to this database. + New rpm macros has been added: %udev_rules_update(), %_udevhwdbdir, %_udevrulesdir, %_journalcatalogdir, %_tmpfilesdir, %_sysctldir. + "age" field for tmpfiles entries can be set to 0, forcing removal of files matching this entry. + coredumpctl gained "gdb" verb to invoke gdb on selected coredump. + In service files, %U can be used for configured user name of the service. + nspawn can be invoked without a controlling TTY. + systemd and nspawn can accept socket file descriptors when started for socket activation. This allow socket activated nspawn containers. + logind can now automatically suspend/hibernate/shutdown system on idle. + ConditionACPower can be used in unit file to detect if AC power source is connected or if system is on battery power. + EnvironmentFile= in unit files supports file globbing. + Behaviour of PrivateTmp=, ReadWriteDirectories=, ReadOnlyDirectories= and InaccessibleDirectories= has changed. The private /tmp and /var/tmp directories are now shared by all processes of a service (which means ExecStartPre= may now leave data in /tmp that ExecStart= of the same service can still access). When a service is stopped its temporary directories are immediately deleted (normal clean-up with tmpfiles is still done in addition to this though). + Resource limits (as exposed by cgroup controlers) can be controlled dynamically at runtime for all units, using "systemctl set-cgroup-attr foobar.server cgroup.attribute value". Those settings are stored persistenly on disk. + systemd-vconsole-setup will now copy all fonts settings to all allocated VTs. + timedated now exposes CanNTP property to indicate if a local NTP service is available. + pstore file system is mounted by default, if available. + SMACK policies are loaded at early boot, if available. + Timer units now support calendar time events. + systemd-detect-virt detect xen PVs. + Some distributions specific LSB targets has been dropped: $x-display-manager, $mail-transfer-agent, $mail-transport-agent, $mail-transfer-agent, $smtp, $null. As well mail-transfer-agent.target and syslog.target has been removed. + systemd-journal-gatewayd gained SSL support and now runs as unprivileged user/group "systemd-journal-gateway:systemd-journal-gateway" + systemd-analyze will read, when available, boot time performance from EFI variable from boot loader supporting it. + A new generator for automatically mounting EFI System Partition (ESP) to /boot (if empty and no other file system has been configured in fstab for it). + logind will now send out PrepareForSleep(false) out unconditionally, after coming back from suspend. + tmpfiles gained a new "X" line type, that allows configuration of files and directories (with wildcards) that shall be excluded from automatic cleanup ("aging"). + udev default rules set the device node permissions now only at "add" events, and do not change them any longer with a later "change" event. + A new bootctl tool has been added that is an interface for certain EFI boot loader operations. + A new tool kernel-install has been added to install kernel images according to Boot Loader Specification. + A new tool systemd-activate can be used to test socket activation. + A new group "systemd-journal" is now owning journal files, replacing "adm" group. + journalctl gained "--reverse" to show output in reverse order, "--pager-end" to jump at the end of the journal in the pager (only less is supported) and "--user-unit" to filter for user units. + New unit files has been addedto ease for systemd usage in initrd. + "systemctl start" now supports "--irreversible" to queue operations which can be reserved. It is now used to make shutdown requests more robust. + Auke Kok's bootchart has been merged and relicensed to LGPLv2.1+. + nss-myhostname has been merged in systemd codebase. + some defaults sysctl values are now set by default: the safe sysrq options are turned on, IP route verification is turned on, and source routing disabled. The recently added hardlink and softlink protection of the kernel is turned on. + journald will now explicitly flush journal files to disk at the latest 5 min after each write and will mark file offline until next read. This should increase reliability in case of crash. + remote-fs-setup.target target has been added to pull in specific services when at least one remote file system is to be mounted. + timers.target and paths.target have been added as canonical targets to pull user timer and path units, similar to sockets.targets. + udev daemon now sets default number of worker processes in parallel based on number of CPUs instead of RAM. + Most unit file settings which takes likst of items can now be reset by assigning empty string to them, using drop-in. + Add support for drop-in configuration file for units. + Most unit file settings which takes likst of items can now be reset by assigning empty string to them, using drop-in. + 'hostnamectl set-hostname' allows setting FQDN hostnames. + fractional time intervals are now parsed properly. + localectl can list available X11 keymaps. + systemd-analyze dot can filter for specific units and has been rewritten in C. + systemctl gained "list-dependencies" command. + Inhibitors are now honored no only in GNOME. + 'systemctl list-jobs' got some polishing. '--type=' argument may now be passed more than once. 'systemctl list-sockets' has been added. + systemd gained a new unit 'systemd-static-nodes.service' that generates static device nodes earlier during boot, and can run in conjunction with udev. + systemd-nspawn now places all containers in the new /machine top-level cgroup directory in the name=systemd hierarchy. + bootchart can now store its data in the journal. + journactl can now take multiple --unit= and --user-unit= switches. + The cryptsetup logic now understands the "luks.key=" kernel command line switch. If a configured key file is missing, it will fallback to prompting the user. -- Frederic Crozat <fcrozat(a)suse.com> SUSE -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

10 31

[opensuse-factory] Tumbleweed update today breaks vlc from packman
by Patrick Shanahan 30 Jul '13

30 Jul '13

09:58 Crash: ~ > vlc VLC media player 2.0.6 Twoflower (revision 2.0.6-0-gbe9623c) Segmentation fault 09:58 Crash: ~ > rpm -q --last vlc vlc-2.0.6-116.4.x86_64 Thu 25 Apr 2013 09:50:02 AM EDT ?? tks, -- (paka)Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 http://en.opensuse.org openSUSE Community Member Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

8 30

Re: [opensuse-factory] 12.3 RC1 R128 trouble (was: ...install mysteries)
by Felix Miata 12 Jul '13

12 Jul '13

On 2013-02-18 16:40 (GMT+0100) Roger Oberholtzer composed: > I am installing 12.3 RC1 on a machine that happily runs earlier versions > of openSUSE. The graphics is, admittedly, an older ATI Rage XL (MACH64). > It runs as a server, and this is on the MB. It is usually only seen > during install. > The install was a bit of a PITA because, no matter what display I used, > I could not get a graphic install to work. I tried setting various > resolutions and even 'No KMS' in the initial install screen. The screen > would go black, and I could do nothing. No virtual terminals. Nothing. > Eventually I had settle for the text install. Using 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Rage Mobility M3 AGP 2x (rev 02) here. 11.4 works OK. I installed HTTP started by Grub using latest factory-snapshot with nomodeset on cmdline. Graphical install worked fine, though slow with only 384M RAM, but resulting X is unusable. The left half of the screen is fine, but the right side is a mess, as if there were some kind of buffer misalignment repeating portions and omitting others. Using nomodeset produces mostly black screens with colored lines in various places at various times in attempting to start the login manager, and kills keyboard. Bunch of Xorg.0.log files: http://fm.no-ip.com/Tmp/Linux/Xorg/os123r128/ Anyone looked for a match to any of these upstream R128 bugs? http://tinyurl.com/bz5lfmv I've commented in the last bug in that list. Exiting X makes the system unresponsive to keyboard and mostly empties the screen to black. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] Poll about LXDE-E17 available through installer and on DVD
by Stathis Iosifidis (aka diamond_gr) 20 Jun '13

20 Jun '13

Hello mates, Few days ago, Softpedia had a blogpost [1] regarding an e-mail from Tomas Cech at our factory mailing list [2]. Tomas and Simon continue to maintain Enlightenment for openSUSE (check their TODO list at our Portal [3]). So we made a poll at connect to tell us you think about it. Here is the link: http://goo.gl/KYRak Deadline is on July 25th, right after the openSUSE conference [4]. Thank you for your help. Have a lot of phun, Stathis [1] http://news.softpedia.com/news/openSUSE-to-Drop-LXDE-in-Favor-of-E17-354437… [2] http://lists.opensuse.org/opensuse-factory/2013-05/msg00208.html [3] https://en.opensuse.org/Portal:Enlightenment [4] https://conference.opensuse.org/ -- http://about.me/iosifidis http://eiosifidis.blogspot.gr http://blogs.gnome.org/eiosifidis Great leaders don't tell you what to do... They show you how it's done. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

8 7

[opensuse-factory] Integration of YaST in Ruby into Factory/openSUSE 13.1
by David Majda 04 Jun '13

04 Jun '13

Hi, as some may know, since January few SUSE developers in Prague are working on automatically translating YaST codebase from YCP (an old proprietary language) into Ruby. The main goals are to give the platform a technology boost, so that we can evolve it easier in the future, and lower the effort spent on maintenance in the long term. The project recently reached an important milestone -- we are able to install a 12.3-based system using an installer composed only of translated YaST modules: http://lists.opensuse.org/yast-devel/2013-05/msg00026.html We would like to integrate that work Factory/openSUSE 13.1 soon. Technically the integration mainly means that we would do a final switch of the language to Ruby in YaST's Git repository and submit updated packages into Factory. We think we will be able to do this in time for M4. We'd also like to use M2 and M3 as test-beds and produce our own versions of the images (meaning we'll take exactly the same packages as in M2/M3, replace the YaST ones with Ruby version, and build the image in the same way as official images). We'd also like to use the openQA infrastructure to test our images extensively. We think that with this approach we'll be well-prepared for the final integration and we'll minimize the number of bugs and regressions. For more details about the plan and reasoning behind it, see my e-mail on yast-devel: http://lists.opensuse.org/yast-devel/2013-05/msg00035.html Since this is a big change, I thought it would be good to announce it here. If anyone has any questions or objections, please let me know so we can discuss them and possibly adapt the plan. Thanks. -- David Majda SUSE Studio developer http://susestudio.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

12 18

[opensuse-factory] can apache HTTP Server be updated to version 2.4.4 [from v-2.4.3]
by doiggl＠velocitynet.com.au 30 May '13

30 May '13

Hello, Can apache HTTP Server be updated to version 2.4.4 [from v-2.4.3] https://build.opensuse.org/package/show?package=apache2&project=openSUSE%3A… http://httpd.apache.org/download.cgi Stable Release - Latest Version: 2.4.4 (released 2013-02-25) http://httpd.apache.org/download.cgi#apache24 -- Thanks Glenn -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] help wanted: How can I get an apache2 install working. on 127.0.0.1
by doiggl＠velocitynet.com.au 29 May '13

29 May '13

Hello, How can I get an apache install working. I get the error on 127.0.0.1 I have been following instructions from http://en.opensuse.org/SDB:Apache_installation Here is what I have done: # zypper in apache2 Loading repository data... Reading installed packages... 'apache2' is already installed. No update candidate for 'apache2-2.4.3-1.1.x86_64'. The highest available version is already installed. sysconf_addword /etc/sysconfig/SuSEfirewall2 FW_CONFIGURATIONS_EXT apache2 "apache2" already present sysconf_addword /etc/sysconfig/SuSEfirewall2 FW_CONFIGURATIONS_EXT apache2-ssl "apache2-ssl" already present rcapache2 start redirecting to systemctl start apache2 #firewall rcSuSEfirewall2 restart chkconfig -a apache2 Note: This output shows SysV services only and does not include native systemd services. SysV configuration data might be overridden by native systemd configuration. # cat /srv/www/htdocs/index.html <html><body><h1>It works!</h1></body></html> #status and log shows: /bin/systemctl status apache2.service apache2.service - The Apache Webserver Loaded: loaded (/usr/lib/systemd/system/apache2.service; enabled) Active: failed (Result: exit-code) since Wed, 2013-05-29 20:08:59 EST; 37s ago Process: 9030 ExecStop=/usr/sbin/start_apache2 -D SYSTEMD -DNO_DETACH -k graceful-stop (code=exited, status=1/FAILURE) Process: 9001 ExecStart=/usr/sbin/start_apache2 -D SYSTEMD -DNO_DETACH -k start (code=exited, status=1/FAILURE) CGroup: name=systemd:/system/apache2.service May 29 20:08:59 test.site start_apache2[9001]: Module "authz_default" is not installed, ignoring. May 29 20:08:59 test.site start_apache2[9001]: Check the APACHE_MODULES setting in /etc/sysconfig/apache2. May 29 20:08:59 test.site start_apache2[9001]: AH00526: Syntax error on line 1 of /etc/apache2/uid.conf: May 29 20:08:59 test.site start_apache2[9001]: Invalid command 'User', perhaps misspelled or defined by a module not included in the server configuration May 29 20:08:59 test.site systemd[1]: apache2.service: main process exited, code=exited, status=1/FAILURE May 29 20:08:59 test.site start_apache2[9030]: Module "authz_default" is not installed, ignoring. May 29 20:08:59 test.site start_apache2[9030]: Check the APACHE_MODULES setting in /etc/sysconfig/apache2. May 29 20:08:59 test.site start_apache2[9030]: AH00526: Syntax error on line 1 of /etc/apache2/uid.conf: May 29 20:08:59 test.site start_apache2[9030]: Invalid command 'User', perhaps misspelled or defined by a module not included in the server configuration May 29 20:08:59 test.site systemd[1]: Unit apache2.service entered failed state cat /etc/apache2/uid.conf User wwwrun Group www rpm -qa| grep -i apache2 | sort apache2-2.4.3-1.1.x86_64 apache2-devel-2.4.3-1.1.x86_64 apache2-doc-2.4.3-1.1.noarch apache2-event-2.4.3-1.1.x86_64 apache2-example-pages-2.4.3-1.1.x86_64 apache2-mod_perl-2.0.7+svn1448242-1.1.x86_64 apache2-mod_php5-5.4.14-1.1.x86_64 apache2-prefork-2.4.3-1.1.x86_64 apache2-utils-2.4.3-1.1.x86_64 apache2-worker-2.4.3-1.1.x86_64 perl-Apache2-AuthCookieDBI-2.14-6.1.noarch rubygem-passenger-apache2-3.0.19-1.2.x86_64 # cat /srv/www/htdocs/index.html <html><body><h1>It works!</h1></body></html> Question: How can this error be fixed what commands do I run ? Thanks Glenn -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 5

[opensuse-factory] Tumbleweed Kernel since 3.9.1 crypttab trouble
by ub22 27 May '13

27 May '13

I've updated the Kernel via Tumbleweed. Since the last two Kernel Versions 3.9.1 and 3.9.2 the booting fails with my Cryptodevice settings: Installed Kernels: /boot/vmlinuz-3.9.0-6-desktop: Linux/x86 Kernel, Setup Version 0x20c, bzImage, Version 3.9.0, Version 3.9.0-6, RO-rootFS, swap_dev 0x4, Normal VGA works fine /boot/vmlinuz-3.9.1-7.gb6484b6-desktop: Linux/x86 Kernel, Setup Version 0x20c, bzImage, Version 3.9.1, RO-rootFS, swap_dev 0x4, Normal VGA hangs at Code: systemd[1]: Breaking ordering cycle by deleting job systemd-cryptsetup(a)cr_temp.crypt.service/start as endless loop. /boot/vmlinuz-3.9.2-8.g04040b9-desktop: Linux/x86 Kernel, Setup Version 0x20c, bzImage, Version 3.9.2, RO-rootFS, swap_dev 0x4, Normal VGA the same as Kernel 3.9.1 cat /etc/fstab /dev/disk/by-id/ata-xxx-part1 swap swap defaults 0 0 /dev/disk/by-id/ata-yyy-part1 / ext4 acl,user_xattr 1 1 /dev/disk/by-id/ata-xxx-part3 /tmp ext4 defaults 1 1 /dev/disk/by-id/ata-xxx-part2 /mnt/boot ext4 defaults 1 2 proc /proc proc defaults 0 0 sysfs /sys sysfs noauto 0 0 debugfs /sys/kernel/debug debugfs noauto 0 0 usbfs /proc/bus/usb usbfs noauto 0 0 devpts /dev/pts devpts mode=0620,gid=5 0 0 /dev/mapper/cr_temp.crypt /home/usr/temp ext4 loop,noauto,acl,user_xattr,nofail 0 2 192.168.1.1:/home /home nfs4 defaults 0 0 192.168.1.1:/sik /mnt/sik nfs4 defaults 0 0 #.... cat /etc/crypttab #cr_temp.crypt /mnt/sik/temp/temp.crypt none timeout=0 #original entry but same result as next line cr_temp.crypt /mnt/sik/temp/temp.crypt none nofail,timeout=0 With this entries (both) the new Kernels have the effect. (I uses "nofail" instead of "noauto" like described in the "man" pages. cat /etc/crypttab cr_temp.crypt /mnt/sik/temp/temp.crypt none noauto,timeout=0 This is working but I can't mount the crypto device. I found in the net, that I should start the service "systemctl start secret.mount" or "systemctl restart secret.mount" Normally I mount after booting via "systemd-tty-ask-password-agent" command, the crypto file system, if it is working. Have anyone an idea, what can be my mistake or is this relay a bug? Ulf PS: I've also posted this on openSUSE Forum: https://forums.opensuse.org/english/get-technical-help-here/tumbleweed/4870… -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 4

[opensuse-factory] Everybody be cool, this is a milestone!
by Stephan Kulow 27 May '13

27 May '13

Hi, It's about time we start releasing milestones again, so I would like to finish one this week (being on vaction next and last week :) Factory doesn't look *that* good, but not that bad either, so I would like to release what we have after fixing some evil bugs (like missing X drivers on installation media). Just to let you know why I'm only looking at specific packages and leave your package uncommited. The roadmap would look like this: 16.5 - M1 13.6 - M2 11.7 - M3 8.8 - M4 19.9 - B1 10.10 - RC1 31.10 - RC2 8.11 - GMC Greetings, Stephan P.S. 13.1's codename is Bottle (green) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 9

[opensuse-factory] glibc-locale issue in Haskell packages
by Peter Trommler 24 May '13

24 May '13

Hi, I have been seeing the following in Factory builds of all Haskell libraries on OBS recently: [ 46s] ghc-base-devel-4.6.0.1-6.6 ######################################## [ 1006s] ghc-pkg: out of memory (requested 1048576 bytes) See: https://build.opensuse.org/package/rawlog?arch=x86_64&package=hscolour&proj… ghc-pkg is run in the %post section of all ghc-*-devel packages. Reading through the logs of other Haskell packages on OBS I think ghc-pkg allocates all available memory and is then killed only when glibc-locale is not installed. openSUSE 12.1, 12.2, and 12.3 all preinstall glibc-locale and there I have not seen any problems with ghc-pkg. After adding a Requires to the package providing ghc-pkg (ghc-compiler) Haskell packages build normally now (see devel:languages:haskell). I am not sure this is the right way to fix this issue though. I have not been able to reproduce the issue building on my local machine running openSUSE 12.2 and I have not heard anyone on the Haskell mailing lists complain about ghc-pkg. Could this be a glibc issue? Thanks, Peter -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 3

[opensuse-factory] milestone 1 - was the default sysrq setting changed intentionally?
by Per Jessen 24 May '13

24 May '13

When I tried Sysrq-B on a fresh M1 install, I was informed that the sysrq function is disabled. -- Per Jessen, Zürich (14.1°C) http://www.dns24.ch/ - free DNS hosting, made in Switzerland. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

6 14

[opensuse-factory] libpng16 will not read some (broken) png images
by pgajdos＠suse.cz 24 May '13

24 May '13

Hi List, JFYI, libpng 1.6.2, which is currently in factory can introduce fails when reading png, namely 'IDAT: invalid distance too far back'. See e. g. multimedia:apps/lilypond build for factory. Very probably, these images will not read anymore with newer libpngs. For multimedia:apps/lilypond example, there are 195 png images, only three fails to read. It is possible to use optipng to fix them or wait for 1.6.3, which will ship png-fix-too-far-back tool (see graphics/libpng17). I am going to create corresponding rpm macro to find and fix these PNGs in a package, where it is called. Again, these PNGs are said to be broken; they should be fixed upstream. If I've understood correctly, not supporting them should help libpng to be more memory-efficient. Further reading & links: https://git.reviewboard.kde.org/r/110314/ Thanks, Petr

2 4

[opensuse-factory] Still a problem -- libwrap doesn't work properly on ipv4-only kernel
by Linda Walsh 24 May '13

24 May '13

I reported this a while back and people thought it might be the dns server's issue, but looking at the code the problem is that the patched version of tcpd.c that enables it to work for ipv6, DISABLES it working for ipv4. Does anyone know who is responsible for the tcp_wrappers/libwrap/tcpd package? I had to turn off full checking in tcpd and set it for 'warn only', (if it checked instead of warn'ed it would lock me out). The warning / problem message look like: May 23 15:34:56 Ishtar sshd[39364]: warning: /etc/hosts.allow, line 63: host name mismatch: Athenae != (null) (::ffff:192.168.4.12) Athenae didn't have an ipv6 addr because the server has no ipv6 interfaces. tcpd was setup to only query for dns on ipv6... Now can login with no warnings, but I don't have an ipv6 to immediately test this on. But the same binary should work now for both ipv4 and ipv6 enabled kernels. I check for presence of /proc/sys/net/ipv6 . If it exists, I use the ipv6 code path else use the ipv4 code path. I did verify if I manually set the flag to ipv6 mode, I got the warning again as before, but in the mode where it tests for the proc dir existence, I don't. Attached is a diff against lastest factory source that should fix the problem If the maintainer could look it over and give it a run on an ipv6 enabled machine, and either include in suse's product, or better, feed it back upstream (it was looking at the source changes upstream that gave me the idea that they'd done a quick ipv6 job) that's be great..? It was a quick job, but I think I have confidence enough in it to submit it here. Can it be integrated if it is ok? It fixes a long outstanding problem in the tcpd code...

2 3

[opensuse-factory] Custom kernel and nvidia
by Daniele 23 May '13

23 May '13

Hi guys, I've just recompiled my own kernel (from kernel-source package) so far so good.. How to deal with nvidia drivers ? Is there a way to trigger the rebuild of modules ? What happens if I reinstall nvidia packages ? Can I build modules for differents kernel (same version) from nvidia packages ? Do I need DKMS ? I know that this is not a support list but if the answer is switch to dkms and/or install nvidia driver from nvidia site, something could be done for the next release... Daniele. -- *** Linux user # 198661 ---_ ICQ 33500725 *** *** Home http://www.kailed.net *** *** Powered by openSUSE *** -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

Re: [opensuse-factory] Custom kernel and nvidia
by Daniele 23 May '13

23 May '13

In data martedì 21 maggio 2013 19:48:11, James D. McDaniel ha scritto: > On 05/19/2013 05:10 AM, Daniele wrote: > > Hi guys, I've just recompiled my own kernel (from kernel-source > > package) so far so good.. > > How to deal with nvidia drivers ? Is there a way to trigger the > > rebuild of modules ? > > > > What happens if I reinstall nvidia packages ? > > Can I build modules for differents kernel (same version) from nvidia > > packages ? > > > > Do I need DKMS ? > > > > I know that this is not a support list but if the answer is switch > > to > > dkms and/or install nvidia driver from nvidia site, something could > > be done for the next release... > > > > Daniele. > > You can compile your kernel with this as well: S.A.K.C. - SUSE Thank you, I 'm aware about SAKC, DKMS etc, etc.. but at this point is easiest to install nvidia driver from Nvidia and rebuild the module when needed. We have the source already in place so we only miss a (easy) way to rebuild the module... This: https://build.opensuse.org/package/view_file?expand=1&file=kmp-post.sh&pack… (and maybe some more code) should be a separate script and not inside the spec file. So it would be re-callable after installation... Just for the record, my main desktop still on 12.2 (I miss liveCD..) so kernel 3.4.* Daniele. -- *** Linux user # 198661 ---_ ICQ 33500725 *** *** Home http://www.kailed.net *** *** Powered by openSUSE *** -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] qemu package split
by Andreas Färber 23 May '13

23 May '13

Hi everyone, Ever since I've been involved with openSUSE, the qemu package has had an unusual setup of configuring and building twice: once for the regular binaries, then moving them to a temporary directory and finally configuring and building statically for the qemu-linux-user subpackage, used for arm chroot builds among others. In our quest to finally unify the kvm and qemu packages, I have updated the qemu package to 1.5.0 (SR#176307 pending for Factory) and have subsequently prepared to split the qemu.spec[.in] to build qemu-linux-user in a separate linked package similar to gcc or kernel: https://build.opensuse.org/request/show/176308 AFAICS the RPM package name stays the same that way, so armv7/armv5el should hopefully be unaffected and the change transparent to end users. A nice side-effect is that we can limit the SLE_11_SP2 build breakage to qemu-linux-user package (BNC#820754: SLE_11_SP2 is missing a glibc maintenance update for static builds). Also the dependencies for qemu-linux-user get significantly less and no *-static deps for qemu. If I don't hear any objections, I'll accept the changed qemu package into Virtualization project later today and will setup qemu-linux-user package there. For Factory this is a heads-up that we will require to copy/setup the additional qemu-linux-user package once we've tidied up and submit the package split to Factory at some future point towards 13.1. Further 13.1 work still under discussion is to create further subpackages inside qemu so that the kvm package won't need to depend on mips etc. emulation binaries. Regards, Andreas -- SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] openSUSE 13.1 repo change to Factory Snapshot or Factory?
by Roman Bysh 23 May '13

23 May '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello List mates, For openSUSE 13.1 Milestone 1. Do I switch the repos to Factory Snapshot or Factory? Cheers! Roman - ------------------------------------------------------- openSUSE -- Get it! Discover it! Share it! - ------------------------------------------------------- http://linuxcounter.net/ #179293 -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQEcBAEBAgAGBQJRmQEvAAoJEISyH9AowGDQxSQH/idkrfMPfq3cYLatCeCuv7qh b+b+NKZvoGbGlHkFj2I8+9jVDfch9oN/6ULXDR/J5CR4ZAVqjgdR7tQlpRpu3KPy nAFoYX/IhRG0TQZq15gbqeLLqSGpqByXzgtrNvaAFk0QeemdlEQUe3QYisRZC/mu hvj9NAHD81okC0FMSzQiOG9cBkCKKv+vOsO0N8beK5Nap6vYtcQPMWvpR+yyyE4N sG2rIQVWIjyHhT/s2yljP5lWfIcYqQVxchmFuAeFDLN5sYwFyiGWJp0AylbQQDRi ppLeaMbMSQ6H7+ot4fu6Z+dkGF3vW2x/6YAFq1jVnhs/bkZkXHFyO73LBgIx/dk= =Llgw -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 7

[opensuse-factory] New package twilio-utils
by Archie Cobbs 21 May '13

21 May '13

Hello, I'd like to submit a new package to factory, twilio-utils in network:telephony. This is a set of command line scripts for interacting with the Twilio: http://www.twilio.com/ Twilio is an Internet telephony and SMS gateway service. The twilio-utils project contains a few UNIX command-line utilities that are handy when working with Twilio: * sendsms - Send an outbound SMS message via Twilio * smslen - Calculate SMS payload length * twilog - Download Twilio notifications into syslog https://build.opensuse.org/package/show?package=twilio-utils&project=networ… The upstream project is also maintained by me. Thanks, -Archie -- Archie L. Cobbs -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] PANIC: unprotected error in call to Lua API (zlib library version does not match - header: 1.2.7, library: 1.2.8)
by Alin Marin Elena 20 May '13

20 May '13

that is with a current factory when trying to run for example luatools or lualatex. reverting to 1.2.7... solves the luatools lualatex issues... but I do not what else breaks. Alin -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] RFC: replace LXDE with E17
by Tomas Cech 20 May '13

20 May '13

Hi, work on E17 is still in progress but I believe that E17 is very well usable for everyday use already. I'd like to make E17 available for openSUSE users through installer and on DVD. Unfortunately DVD is already more than full so to get something in means get something out at the same time. There is one obvious choice - LXDE doesn't seem to be much alive. This doesn't mean that packages would be dropped, it only means that packages won't be available on DVD and installation choice would be removed. I see also another way possible - enhance installer to offer desktop environment if there is Internet connection and install from network. Even though it sounds correct it may mean a lot of work... So possible choices: 1] no E17 is needed on DVD 2] get rid of LXDE finally 3] YaST installer should be fixed Please, tell me your opinion here. Best regards, Tomas Cech Sleep_Walker

13 30

[opensuse-factory] mysql-workbench build on factory needs love and help
by Bruno Friedmann 19 May '13

19 May '13

For whatever reasons (certainly good) mysql-workbench is a fail state for almost 4 weeks now. [1] Extract of the build error So if someone could propose a solution to fix the build of it. Like explaining also why it suddently fail only on openSUSE_Factory. even if it could get a gold medal of warnings per build :-) obs project https://build.opensuse.org/package/live_build_log?arch=i586&package=mysql-w… Thanks -- Bruno Friedmann Ioda-Net Sàrl www.ioda-net.ch openSUSE Member & Advocate GPG KEY : D5C9B751C4653227 irc: tigerfoot

1 0

[opensuse-factory] new Mozilla JavaScript lib
by Wolfgang Rosenauer 19 May '13

19 May '13

Hi, I'm going to submit a new Mozilla JS engine to Factory. It'll be a new set of packages and no update for existing ones. New packages are named libmozjs-17_0 - containing the library mozjs17 - currently more or less empty (could hold the JS interpreter but the interpreter can only be built statically linked currently and so I left it out for now. If there is any need for a command line JS interpreter, please let me know. mozjs17-devel - include and pkg-config file mozjs-17.0.pc and as you can see from the version numbering it is based on the ESR17 version. The existing JS engine libmozjs185-1_0 js js-devel will be dropped afterwards. Please migrate your packages to use the new engine once it appears in Factory. Wolfgang -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] how does one get the rootfs device name to compare against one in /etc/fstab (and lvm vols)
by Linda Walsh 18 May '13

18 May '13

Seems like the code to mount was extremely messed up in factory or 12.3 -- not exactly sure -- but someone replaced the old, working mount, with one based on one in usr/lib/libmount -- which doesn't seem to know about fstab nor does it know about "mtab" (as needing to be separate from /proc/mounts). I have mount points setup in fstab. I have disk maint programs that need to tie mounted file systems to those device names used in fstab. It used to be simple to determine the dev of a directory: df <dir> (like "df .") -- massage and you'd have the device name. Now, the best I've come up with is to **NOT** have /etc/mtab linked (or mount cannot write to it!! as documented in the man page). Zero it out, then run "mount -c -f -a" to recreate most of it. Seems like the devices are not created in the new map. But unless I run "mount -c -f /" in addition to the "-a" line, root's fs doesn't show up... why do I want to see "rootfs".. it's insecure -- I don't know the real root device. Can mount be fixed? And can the advice to link /etc/mtab->/proc/mounts be reconsidered -- since it breaks documented "mount" functionality (or will this now be called another "weird case"...ignored? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 17

[opensuse-factory] doc formatting oddity -- that, IMO, could use correction
by Linda Walsh 18 May '13

18 May '13

Which software is doing this? The bash manpage has source: [\fBtime\fP [\fB\-p\fP]] [ ! ] \fIcommand\fP [ [\fB|\fP\(bv\fB|&\fP] \fIcommand2\fP ... ] that produces: [time [-p]] [ ! ] command [ [|⎪|&] command2 ... ] - - - - - - - - - - - -- - - ^ Which *may* look right on your display or not The char over my carat, that seems to be what "(bv" in the source is being mapped to, is a U+23AA, which is a full-height vertical line used in box-drawings. It stuck out because 2/3 of my displays showed a "�" or empty box for that char. It doesn't seem to be that common, not to mention *semantically incorrect*. It would be better, I think, if the software matched "(bv" to a presentation form for a vertical bar. Presuming that half-width is preferable over full-width, (though it may not make a difference, now that I think about it) to use U+FFE8, "￨" -- a half-width light vertical bar that is taller than 0x7f (at least in the fonts I am seeing it with). Putting the logical or in the middle with the halfwidth vertical light on either side of it: looks like (with a few repeats): "￨|￨￨|￨￨|￨￨|￨". Is that SW troff or nroff or what? Is that something that is configured upstream? tnx... -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] Milestone 1 not available on software.opensuse.org
by Freek de Kruijf 17 May '13

17 May '13

Milestone 1 is not yet available/visible on software.opensuse.org. -- fr.gr. Freek de Kruijf -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] milestone 1 - icmp redirect issue still prevents installation
by Per Jessen 17 May '13

17 May '13

I reported this about a month ago for 12.3: https://bugzilla.novell.com/show_bug.cgi?id=814510 -- Per Jessen, Zürich (14.1°C) http://www.dns24.ch/ - free DNS hosting, made in Switzerland. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] YaST doesn't work
by Kyrill Detinov 17 May '13

17 May '13

Hello. After recent update YaST doesn't work (again). terminate called after throwing an instance of 'YUIPluginException' what(): Couldn't load plug-in qt YaST got signal 6 at YCP file Wizard.ycp:720 /sbin/yast2: line 431: 15903 ÐÐ²Ð°ÑÐ¸Ð¹Ð½ÑÐ¹ Ð¾ÑÑÐ°Ð½Ð¾Ð² $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS -- WBR Kyrill

4 6

[opensuse-factory] wx error after upgrade to 13.1 Milestone 1
by Sid Boyce 15 May '13

15 May '13

Traceback (most recent call last): File "quisk.py", line 27, in <module> import wx, wx.html, wx.lib.buttons, wx.lib.stattext, wx.lib.colourdb, wx.grid File "/usr/lib64/python2.7/site-packages/wx-2.8-gtk2-unicode/wx/__init__.py", line 45, in <module> from wx._core import * File "/usr/lib64/python2.7/site-packages/wx-2.8-gtk2-unicode/wx/_core.py", line 14825, in <module> from _misc import * File "/usr/lib64/python2.7/site-packages/wx-2.8-gtk2-unicode/wx/_misc.py", line 4, in <module> import _misc_ ImportError: /usr/lib64/python2.7/site-packages/wx-2.8-gtk2-unicode/wx/_misc_.so: symbol wxDefaultVideoMode, version WXU_2.8 not defined in file libwx_gtk2u_core-2.8.so.0 with link time reference Regards Sid. -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Senior Staff Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 1

[opensuse-factory] Tumbleweed: Emacs/AucTeX+GTK - LaTeX process does not finish
by Peter Hanisch 15 May '13

15 May '13

Hej! I have a problem with Emacs/AucTeX, which is *somehow* connected to the big Gnome update that landed in Tumbleweed within the last couple of days. I have not yet reported this as a bug since I quite frankly do not know what to report. I get *no* error messages via Emacs's Messages buffer or via console output etc. Normally, when compiling a LaTeX-document with Emacs & AucTeX, the output is sent to another buffer, emacs runs pdflatex and once pdflatex finishes, Emacs prints "Successfully wrote [x] pages" in the minibuffer. Afterwards, one can call another command, be it another LaTeX-run, Biber/Bibtex/Biblatex etc. etc. *However*, Emacs does *not* produce the "Successfully..." message, and subsequently, the latex process never finishes, unless killed by hand. This *only* happens in Emacs+GTK(3), emacs-x11 works as intended. This means *something* GTK-related breaks Emacs/AucTeX, however, I have no idea where I should even start to look since I get no output/errors etc. Does anybody have any ideas what could be causing this? Peter -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 7

[opensuse-factory] factory iptables: wants libiptables.so.9, but links with generic?
by Linda Walsh 15 May '13

15 May '13

I put the new iptables from factory on my system along with the new libtiptables10. I get a message: iptables: target "standard" has version "libxtables.so.10", but "libxtables.so.9" is required. I put libxtables.so.0 on my system to so it could link to it but it still links to #10. It seems it requires 9, but doesn't link to 9 -- but to target generic. If a product requires version "x", shouldn't it link to libxxxx.so.x and not libxxxx.so (generic) This isn't the first time I've run into this -- where a product requires a specific .so version, but then at run time links to the "generic" name. Why wouldn't a product requiring version "x.y.z, link to the version it requires, then products with multiple requirements could live side-by-side rather than causing version hell? You can't have multiple versions of a lib all named XXXX.so, -- how would the system know which one to load? But if they were named xxxx.so.1, xxxx.so.2, etc... why couldn't they be loaded by the products that need them? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 9

[opensuse-factory] t'weed : mkinitrd
by ellanios82 14 May '13

14 May '13

~ in case of interest : ______________ # mkinitrd Kernel image: /boot/vmlinuz-3.4.6-2.10-desktop Initrd image: /boot/initrd-3.4.6-2.10-desktop KMS drivers: i915 (pango-querymodules:13196): GLib-GObject-CRITICAL **: gtype.c:2720: You forgot to call g_type_init() (pango-querymodules:13196): GLib-CRITICAL **: g_once_init_leave: assertion `result != 0' failed (pango-querymodules:13196): GLib-GObject-WARNING **: cannot retrieve class for invalid (unclassed) type `<invalid>' (pango-querymodules:13196): GLib-GObject-CRITICAL **: g_enum_get_value: assertion `G_IS_ENUM_CLASS (enum_class)' failed (pango-querymodules:13196): Pango-WARNING **: Engine reported invalid script value 10 ............................... best regards -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

12 26

[opensuse-factory] Re: What is the purpose of the systemd journal service?
by Linda Walsh 14 May '13

14 May '13

Cristian Rodríguez wrote: > El 15/09/12 11:49, Per Jessen escribió: > >> I do want to log, but I've looked at the journal already and didn't see >> anything that wasn't already in /var/log/messages, /var/log/mail etc. >> Seems like a duplication of effort and a waste of space in >> /var/log/journal. (which afaict can just be deleted). > > It is significantly more powerful than traditional logging: > > For example > > journalctl /usr/bin/foo --> get messages from program foo > > journalctl /dev/sda --> hard-drive problems ? > > journalctl -p error --> only errors > --- I assume the full power of linux's text utilities can be used on them - like grep, sort, awk, perl... vim... Having logs recorded in a non-text binary format tends to make MS logs out-a-sight, out-a-mind, where as I often go and poke around in /var/log and look to see if I notice anything 'new'. If I can't look at the whole stream as a text (messages, warnings, etc), I don't get a field for what is right or wrong behavior and certainly wouldn't be able to pick out an anomaly if I had to query each item separately -- that global view is a good way to look for 'warts'... MS makes it much to painful to do hat -- 1 error / page, everything in 300 separate queries ... ug! > Currently it is not a full replacement for syslog but I suggest you to > check it out. > I tend to use ngsyslog for the filtering benefits. -- really has some powerful filtering in the 2.x line -- had to label ng3x taboo, so it won't overwrite a working config with a non working config... -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

27 129

[opensuse-factory] t'weed : command : zypper update -t package
by ellanios82 14 May '13

14 May '13

Hello List - the command #zypper update -t package gives output : Loading repository data... Reading installed packages... The following package updates will NOT be installed: gstreamer-0_10-plugins-bad gstreamer-0_10-plugins-base gstreamer-0_10-plugins-good gstreamer-plugins-bad gstreamer-plugins-bad-lang gstreamer-plugins-base gstreamer-plugins-base-lang gstreamer-plugins-good gstreamer-plugins-good-lang gtk2-engine-clearlooks gtk2-engine-crux gtk2-engine-glide gtk2-engine-hcengine gtk2-engine-industrial gtk2-engine-mist gtk2-engine-redmond95 gtk2-engine-thinice libgio-fam libxine2-pulse sushi sushi-lang Nothing to do. ........................... please Greg, should i do 'nothing' OR do i need to install the above list ? - inspite of reading "man zypper" i am unable to understand the true meaning of "zypper update -t package" ................. thanks best regards -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] Tumbleweed: git-cvs tries to pull in cvsps instead of cvsps2
by Achim Gratz 13 May '13

13 May '13

The current git-cvs in Tumbleweed is requiring cvsps (which is v3.8), but should it not instead require cvsps2 like the last build? --8<---------------cut here---------------start------------->8--- Problem: git-cvs-1.8.2.2-8.1.i586 requires cvsps, but this requirement cannot be provided uninstallable providers: cvsps-3.8-2.1.1.i586[openSUSE-current-OSS] Solution 1: Following actions will be done: keep obsolete git-cvs-1.8.2.1-4.1.i586 keep obsolete git-core-1.8.2.1-4.1.i586 keep obsolete gitk-1.8.2.1-4.1.i586 keep obsolete git-web-1.8.2.1-4.1.i586 keep obsolete git-svn-1.8.2.1-4.1.i586 keep obsolete git-gui-1.8.2.1-4.1.i586 keep obsolete git-email-1.8.2.1-4.1.i586 keep obsolete git-1.8.2.1-4.1.i586 Solution 2: deinstallation of cvsps2-2.1-2.1.i586 Solution 3: break git-cvs-1.8.2.2-8.1.i586 by ignoring some of its dependencies --8<---------------cut here---------------end--------------->8--- Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ DIY Stuff: http://Synth.Stromeko.net/DIY.html -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 3

[opensuse-factory] Status automake 1.13
by Stephan Kulow 12 May '13

12 May '13

Hi, After Maximilian put quite some effort into fixing packages, we're down to 28 failures. As Max is on vacation the next weeks, it would be great if someone could target the remains and we can finally update: http://s.kulow.org/3C - or if you prefer the long link: https://build.opensuse.org/project/monitor?utf8=%E2%9C%93&commit=Filter%3A&… Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

9 12

[opensuse-factory] t'weed : xiphos
by ellanios82 11 May '13

11 May '13

Hello List in case of interest : /usr/bin/xiphos will not run : error message : ______________ ** (xiphos:18157): WARNING **: Error retrieving accessibility bus address: org.freedesktop.DBus.Error.ServiceUnknown: The name org.a11y.Bus was not provided by any .service files Error creating proxy: Error calling StartServiceByName for org.gtk.vfs.Daemon: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildSignaled: Process /usr/lib/gvfs/gvfsd received signal 6 (g-dbus-error-quark, 26) (xiphos:18157): GVFS-CRITICAL **: fill_mountable_info: assertion `proxy != NULL' failed ** Message: MAINTAINER_MODE /usr/bin/xiphos: symbol lookup error: /usr/lib/libgtk-3.so.0: undefined symbol: g_type_get_type_registration_serial ............... best regards -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] t'weed : additional rpm output from this evenings "zypper dup"
by ellanios82 10 May '13

10 May '13

in case of interest : __________________ Additional rpm output: (gtk-update-icon-cache:22173): GLib-GObject-CRITICAL **: gtype.c:2720: You forgot to call g_type_init() (gtk-update-icon-cache:22173): GLib-GObject-CRITICAL **: gtype.c:2720: You forgot to call g_type_init() (gtk-update-icon-cache:22173): GLib-GObject-CRITICAL **: g_type_interface_add_prerequisite: assertion `G_TYPE_IS_INTERFACE (interface_type)' failed (gtk-update-icon-cache:22173): GLib-CRITICAL **: g_once_init_leave: assertion `result != 0' failed (gtk-update-icon-cache:22173): GLib-GObject-CRITICAL **: g_type_add_interface_static: assertion `G_TYPE_IS_INSTANTIATABLE (instance_type)' failed (gtk-update-icon-cache:22173): GLib-CRITICAL **: g_once_init_leave: assertion `result != 0' failed (gtk-update-icon-cache:22173): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT (object_type)' failed /var/tmp/rpm-tmp.e0HPSw: line 5: 22173 Segmentation fault /usr/bin/gtk-update-icon-cache --quiet --force "/usr/share/icons/${ICON_THEME}" (4/7) Installing: python-httplib2-0.7.6-2.4.1 ................................[done] (5/7) Installing: libcurl4-7.28.1-4.13.1 .....................................[done] (6/7) Installing: xorg-x11-server-7.6_1.13.2-1.5.1 ...........................[done] Additional rpm output: Updating /etc/sysconfig/displaymanager... (7/7) Installing: curl-7.28.1-4.13.1 .........................................[done] There are some running programs that use files deleted by recent upgrade. You may wish to restart some of them. Run 'zypper ps' to list these programs. .......................... best regards -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] tweed : xfce
by ellanios82 10 May '13

10 May '13

- in case of interest : _______________ - the past several weeks, upon boot-up, xfce starts with grey desktop screen, and without any icons - after about 1 minute, the screens turn black with elegant scrolls + gecko, and the screen icons appear. - i think this may be an gtk library thing [ but that's just my suspicion] .................. best regards -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] New packages: Salt, Salt-api, Salt-cloud and apache-libcloud
by Unknown 10 May '13

10 May '13

Hi I created saltstack salt, salt-api and salt-cloud packages. Saltstack is a configuration management/remote execution system based on zeromq and python. It is very fast and lightweight and can handle servers in their thousands. It will be a great addition to puppet/cfengine/chef/ansible packages, to have some choice. The packages are already in devel:languages:python and the only depency not met in factory is python-apache-libcloud. This package is also build in devel:languages:python. I have spoken with both upstream developers, of saltstack and apache-libcloud and they don't mind if I package these for opensuse/suse/sles/sled. Regards, Niels Abspoel -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] question
by Damian Ivanov 10 May '13

10 May '13

Hi all, I have 2 questions still. 1) To see why a package was dropped I try: osc log -D openSUSE:Dropped $removed_package but this shows only an empty changelog for me. Does that mean I didn't use the correct command or was the reason just not logged? 2) I have a few icon/cursor/kwin etc themes lying around as rpm's. To which Project to submit so they get into Factory in the end? br Damian -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] 12.3: missing dependency (libyui-qt-pkg.so not provided)
by Felix Miata 10 May '13

10 May '13

[ui] YPath.cc(YPath):121 Could NOT find libyui-qt-pkg.so.4 by looking recursive inside /usr/lib/yui [ui] YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-pkg": libyui-qt-pkg.so.4: cannot open shared object file: No such file or directory [qt-ui] YQPackageSelectorPluginStub.cc(YQPackageSelectorPluginStub):49 Plugin qt-pkg does not provide PSP symbol [ui] YQPackageSelectorPluginStub.cc(createPackageSelector):64 THROW: Couldn't load plug-in qt-pkg [ui] YCP_UI.cc(OpenDialog):593 CAUGHT: Couldn't load plug-in qt-pkg [libycp] PackagesUI.ycp:294 UI::OpenDialog() failed Because of this, YaST2 Software Management errors instead of starting in a KDE 4.10.2 that resulted from a minimal X initial installation. Installing libyui-qt-pkg4 fixes it. Why didn't one of the packages that enables YaST Control Center or KDE4 to function pull this package in automatically? Is this absence going to continue in 13.1? -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] New groff package split (groff, groff-full)
by Michal Vyskocil 09 May '13

09 May '13

Hi community, altough groff is quite boring package, it is essential part of each GNU like system. In SUSE we have had an issue that some of parts were not built with all needed dependencies, so they did not properly worked. The point of a groff is that as a manual pages renderer, it is a part of Base:build, so no new dependencies should be added in to make bootstrapping possible. Therefor I've took Debian's approach and made * groff package: stripped down version with fonts and suitable for manual pages * groff-full: recommended by (basic) groff provides the rest of cool things like grohtml, or pdf backends This (including an update to 1.22.2) has been submitted to M17N and any testing before reaching Factory would be welcome. Regards Michal Vyskocil

1 0

[opensuse-factory] Re: why /var/run and /run these two directories have absolutely the same contents?
by Linda Walsh 09 May '13

09 May '13

Carlos E. R. wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > > > On Wednesday, 2013-05-08 at 17:23 +0200, DenverD wrote: > >> the person presenting himself here as "Linda Walsh" has proven to be >> nothing other than one who wishes to disrupt and sow seeds of discord. >> >> i've not read all of "Linda's" post, but of those that i have, i've >> not seen _one_ which discovered and presented a single valid bug or in >> any other way moved this community toward the better product it >> strives to produce. > > No, sometimes she points at valid real problems. She spoils the issue by > the way she talks and how much she deviates from the "standards" or > "customs", but there are some points in what she says. > > Which is unfortunate. --- For that I apologize -- I soften have too much on my plate to not mess things like that up. It's like the double-post -- Usually I don't, but when tired... or beat... I sometimes have. I also tend to not back down just because people order me to. I had a beagle like me, but worse... the other 3 if you swatted them on the butt, they'd back down, but one of them -- always got more violent.. to him, he would die before backing down. I had to figure out a different way to deal with him that wouldn't hurt him Found he didn't like chamomile scented spray... (2-3 drops/pint)...it got so I would only have to reach for the bottle and he'd run off or stop... though sometimes he'd be doing something cute... and just irritating me..... and then he's just throw those puppy dog eyes at me and guilt me out. He one 90% of the arguments we had!...not because he was that strong, but when I didn't back down, and was very firm, he would get deathly depressed. Not want to play, not want to do anything...If I wanted him around, I had to let him 'win' most of the time. I really shouldn't use Shannon as a comparison, as honestly, I'm alot more reasonable. It's when people are unreasonable in my direction -- I tend to respond in kind. But when people are reasonable... I help them work for solutions that work for both of us. I think I also became a bit less tolerant when my last dog died about 15 months ago...still depressing. Beagles bring so much joy with them, its hard to stay upset... -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 1

[opensuse-factory] fontconfig and wine on tumbleweed
by Boris Manojlovic 08 May '13

08 May '13

Hello all, i have identified problem with wine in tumbleweed (and crossover wine is impacted by it too). Version of fontconfig that is now in tumbleweed breaks wine with very interesting error $ winecfg err:module:attach_process_dlls "gdi32.dll" failed to initialize, aborting err:module:LdrInitializeThunk Main exe initialization for L"C:\\windows\\system32\\winecfg.exe" failed, status c0000005 after reverting to "12.3" version of fontconfig libraries system behaves correctly in system wine and in crossover version. Of course crossover response to this problem is very interesting too...: ---------------- We have dropped support for OpenSuse 12.x in Crossover 12.x due to the constantly changing and mismatched libraries that distro maintains. You can download Crossover 11.3 at http://media.codeweavers.com/pub/crossover/cxlinux/demo/crossover-11.3.0-1.… which is the last version that we test and know should work on that distro. ---------------- So what exactly has changed between these two versions that kills wine is unknown to me i | fontconfig | package | 2.10.2-2.2.1 | x86_64 | openSUSE-12.3-1.7 v | fontconfig | package | 2.10.91-2.1 | x86_64 | Tumbleweed -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 9

[opensuse-factory] New package python-imagestore
by Benny Gaechter 08 May '13

08 May '13

Hi I just created a package for python imagestore which is a popular image gallery solution for django projects. I already submited the pacakge successfully to devel:language:python and would like to add it now to openSUSE:Factory. Regards Benny -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] submit theme packages
by Damian Ivanov 08 May '13

08 May '13

Hi all, I have a few icon/cursor/kwin etc themes lying around as rpm's. To which Project to submit so they get into Factory in the end? br Damian -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] MS-fonts don't perform well as defaults
by colAflash＠gmx.net 07 May '13

07 May '13

Hi, currently /usr/share/fontconfig/conf.avail/58-suse-post-user.conf defines the Mircosoft fonts Arial (sans serif), Times New Roman (serif) and Consolas (monospace) as defaults. So they are used if installed by package "fetchmsttfonts". I get 2 problems from this: 1. The gui design changes when installing "fetchmsttfonts", at least for the monospace font-family. I think for the "sans serif" and "serif" families openSUSE delivers fonts it bought which try to look like "Arial" "Times New Roman" so these font-families look may not change. Usually I want to install "fetchmsttfonts" because I get office documents using those fonts and I want them to be displayed as intended or I work with someone on a document using those fonts. But I don't want them as default! 2. "Arial", "Times New Roman" and "Consolas" perform bad. For example Consolas doesn't gives me the dots above the german "Ö" when using sizes smaller then 10pt. For me the free DejaVu family seems to work quite well. Now I'm working with a default fontsize of 8 in X which was completely unusable with MS-fonts. https://en.wikipedia.org/wiki/DejaVu_fonts Debian and Ubuntu use "Bitstream Vera" and DejaVu (which is based on "Bitstream Vera") as default. https://en.wikipedia.org/wiki/Bitstream_Vera Wikipedia tells "Bitstream Vera" misses much symbols. So DejaVu might be the the better choice. What do you think about setting the DejaVu family as default for the next openSUSE? Thanks colAflash -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

8 14

[opensuse-factory] Whom is allowed to access %{_localstatedir}/lib/xdm/authdir
by Raymond Wooninck 07 May '13

07 May '13

Hi, An old issue with KDM got resolved recently and now the KDM Displaymanager is running under the userid KDM instead of the old time favorite root. This seems to fail as that access to certain directories are not granted as that those have been setup very restrictive. One of these directories are %{_localstatedir}/lib/xdm/authdir which comes with the xdm package. Is it indeed correct that root is the only user allowed to access this directory or can we make it looser and allow that users like kdm, gdm, etc can access them ? Thanks Regards Raymond -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] help wanted - Getting apache2 going on opensuse - 127.0.0.1
by doiggl＠velocitynet.com.au 06 May '13

06 May '13

Hello, I am trying to get apache going on opensuse - 127.0.0.1 and get this error[1] when attempting to connect to localhost - apache rpms installed[2] - errors listed[3] - I used this documentation http://en.opensuse.org/SDB:Apache_installation. - /etc/sysconfig/apache2 settings see [4] What else needs to be adjusted to get apache going on 127.0.0.1 Thanks Glenn [1] Unable to connect Firefox can't establish a connection to the server at 127.0.0.1. The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web. [2] # rpm -qa | grep -i apache |sort apache2-2.4.3-1.1.x86_64 apache2-devel-2.4.3-1.1.x86_64 apache2-doc-2.4.3-1.1.noarch apache2-event-2.4.3-1.1.x86_64 apache2-example-pages-2.4.3-1.1.x86_64 apache2-mod_perl-2.0.7+svn1448242-1.1.x86_64 apache2-mod_php5-5.4.14-1.1.x86_64 apache2-prefork-2.4.3-1.1.x86_64 apache2-utils-2.4.3-1.1.x86_64 apache2-worker-2.4.3-1.1.x86_64 perl-Apache-AuthCookie-3.18-7.1.noarch perl-Apache-DBI-1.11-6.1.x86_64 perl-Apache2-AuthCookieDBI-2.14-6.1.noarch rubygem-passenger-apache2-3.0.19-1.2.x86_64 [3]errors # systemctl status apache2.service apache2.service - The Apache Webserver Loaded: loaded (/usr/lib/systemd/system/apache2.service; enabled) Active: failed (Result: exit-code) since Mon, 2013-05-06 18:34:34 EST; 5min ago Process: 12055 ExecStop=/usr/sbin/start_apache2 -D SYSTEMD -DNO_DETACH -k graceful-stop (code=exited, status=1/FAILURE) Process: 12027 ExecStart=/usr/sbin/start_apache2 -D SYSTEMD -DNO_DETACH -k start (code=exited, status=1/FAILURE) CGroup: name=systemd:/system/apache2.service May 06 18:34:34 test.site start_apache2[12027]: Module "authz_default" is not installed, ignoring. May 06 18:34:34 test.site start_apache2[12027]: Check the APACHE_MODULES setting in /etc/sysconfig/apache2. May 06 18:34:34 test.site start_apache2[12027]: AH00526: Syntax error on line 1 of /etc/apache2/uid.conf: May 06 18:34:34 test.site start_apache2[12027]: Invalid command 'User', perhaps misspelled or defined by a module not included in the server configuration May 06 18:34:34 test.site systemd[1]: apache2.service: main process exited, code=exited, status=1/FAILURE May 06 18:34:34 test.site start_apache2[12055]: Module "authz_default" is not installed, ignoring. May 06 18:34:34 test.site start_apache2[12055]: Check the APACHE_MODULES setting in /etc/sysconfig/apache2. May 06 18:34:34 test.site start_apache2[12055]: AH00526: Syntax error on line 1 of /etc/apache2/uid.conf: May 06 18:34:34 test.site start_apache2[12055]: Invalid command 'User', perhaps misspelled or defined by a module not included in the server configuration May 06 18:34:34 test.site systemd[1]: Unit apache2.service entered failed state # cat /etc/apache2/uid.conf User wwwrun Group www # zypper in apache2 Loading repository data... Reading installed packages... 'apache2' is already installed. No update candidate for 'apache2-2.4.3-1.1.x86_64'. The highest available version is already installed. # rcapache2 restart redirecting to systemctl restart apache2 # sysconf_addword /etc/sysconfig/SuSEfirewall2 FW_CONFIGURATIONS_EXT apache2 "apache2" already present # sysconf_addword /etc/sysconfig/SuSEfirewall2 FW_CONFIGURATIONS_EXT apache2-ssl "apache2-ssl" already present # rcSuSEfirewall2 restart # rcapache2 start redirecting to systemctl start apache2 # chkconfig -a apache2 # a2enmod php5 # a2enmod -l actions alias auth_basic authn_file authz_host authz_groupfile authz_default authz_user autoindex cgi dir env expires include log_config mime negotiation setenvif ssl userdir reqtimeout php5 # rcapache2 restart redirecting to systemctl restart apache2 [4]/etc/sysconfig/apache2 settings # cat /etc/sysconfig/apache2 ## Path: Network/WWW/Apache/SuSEhelp ## Description: SuSE help doc server configuration ## Type: yesno ## Default: no ## Config: apache ## ServiceRestart: apache ## Command: # # Set this to yes on the central documentation server # or to configure apache for local use of susehelp. # Then the online-help-system indices are automatically adjusted # and access to the help-files is allowed as specified in DOC_ALLOW. # To run as a client for the central documentation server who's name # is specified in DOC_HOST, just set DOC_SERVER to no. # The DOC_HOST and DOC_ALLOW variables are in the file /etc/sysconfig/susehelp. # DOC_SERVER="no" ## Path: Network/WWW/Apache2 ## Description: Configuration for Apache 2 ## Type: string ## Default: "" ## ServiceRestart: apache2 # # Here you can name files, separated by spaces, that should be Include'd from # httpd.conf. # # This allows you to add e.g. VirtualHost statements without touching # /etc/apache2/httpd.conf itself, which makes upgrading easier. # APACHE_CONF_INCLUDE_FILES="" ## Type: string ## Default: "" ## ServiceRestart: apache2 # # Here you can name directories, separated by spaces, that should be Include'd # from httpd.conf. # # All files contained in these directories will be recursively included by apache. # If a pattern like *.conf is appended, apache will use it. # # Examples: "/etc/apache2/my_conf/" # "/etc/apache2/virtual_hosts/*.conf" # "local/*.conf /srv/www/virtual/" # APACHE_CONF_INCLUDE_DIRS="" ## Type: string ## Default: "actions alias auth_basic authz_host authn_file authz_groupfile authz_default authz_user autoindex cgi dir env expires include log_config mime negotiation setenvif ssl suexec userdir php5" ## ServiceRestart: apache2 # # [It might look silly to not simply edit httpd.conf for the LoadModule statements. # However, since the LoadModule statements might need an absolute path to the modules, # switching between MPMs can be quite a hassle. It's easier to just give the names here.] # # * list of all modules shipped with the base distribution: # # actions alias asis auth_basic auth_digest authn_alias authn_anon # authn_dbd authn_dbm authn_default authn_file authnz_ldap authz_dbm # authz_default authz_groupfile authz_host authz_owner authz_user # autoindex bucketeer cache case_filter case_filter_in cern_meta cgi # charset_lite dav dav_fs dav_lock dbd deflate dir disk_cache dumpio # echo env expires ext_filter file_cache filter headers ident imagemap # include info ldap log_config log_forensic logio mem_cache mime mime_magic # negotiation optional_fn_export optional_fn_import optional_hook_export # optional_hook_import proxy proxy_ajp proxy_balancer proxy_connect # proxy_ftp proxy_http proxy_scgi reqtimeout rewrite setenvif speling ssl # status substitute suexec unique_id userdir usertrack version vhost_alias # # see http://httpd.apache.org/docs-2.2/mod/ ! # # * It pays to use IfDefine statements... like # <IfModule mod_xyz.c> # .... # </IfModule> # # * In the APACHE_MODULES variable, you can use mod_xyz or just xyz syntax. # You may also name an absolute path if you like. # # * NOTE ON SSL: before you can use mod_ssl, you need a server certificate. # A test certificate can be created by entering # 'cd /usr/share/doc/packages/apache2; ./certificate.sh' as root. # Also, you need to set the ServerName inside the <VirtualHost _default_:443> # block to the fully qualified domain name (see /etc/HOSTNAME). # * if your server certificate is protected by a passphrase you should increase the # APACHE_START_TIMEOUT (see above) # * to finally enable ssl support, you need to add 'SSL' to APACHE_SERVER_FLAGS # below. # # * modules listed here will be ignored if they are not installed # # # EXAMPLES: # # fairly minimal # APACHE_MODULES="authz_host alias auth dir log_config mime setenvif" # # apache's default installation # APACHE_MODULES="authz_host actions alias asis auth autoindex cgi dir imap include log_config mime negotiation setenvif status userdir" # your settings APACHE_MODULES="actions alias auth_basic authn_file authz_host authz_groupfile authz_default authz_user autoindex cgi dir env expires include log_config mime negotiation setenvif ssl userdir reqtimeout php5" ## Type: string ## Default: "" ## ServiceRestart: apache2 # # Additional server flags: # # Put here any server flags ("Defines") that you want to hand over to # httpd at start time, or other command line flags. # # Background: Any directives within an <IfDefine flag>...</IfDefine> # section are only processed if the flag is defined. # This allows to write configuration which is active only in a # special cases, like during server maintenance, or for testing # something temporarily. # # Notably, to enable ssl support, 'SSL' needs to be added here. # To enable the server-status, 'STATUS' needs to be added here. # # It does not matter if you write flag1, -D flag1 or -Dflag1. # Multiple flags can be given as "-D flag1 -D flag2" or simply "flag1 flag2". # # Specifying such flags here is equivalent to giving them on the commandline. # (e.g. via rcapache2 start -DReverseProxy) # # Example: # "SSL STATUS AWSTATS SVN_VIEWCVS no_subversion_today" # APACHE_SERVER_FLAGS="" ## Type: string ## Default: "" ## ServiceRestart: apache2 # # Which config file do you want to use? # (if not set, /etc/apache2/httpd.conf is used.) # It is unusual to need to use this setting. # # Note about ulimits: # if you want to set ulimits, e.g. to increase the max number of open file handle, # or to allow core files, you can do so by editing /etc/sysconfig/apache2 and # simply write the ulimit commands into that file. # Example: # ulimit -n 16384 # ulimit -H -n 16384 # ulimit -c unlimited # See the output of "help ulimit" in the bash, or "man 1 ulimit". # APACHE_HTTPD_CONF="" ## Type: list(prefork,worker,event,itk) ## Default: "" ## ServiceRestart: apache2 # # MPM (multi-processing module) to use. # # Needed to determine with which MPM apache will run, as well as # against which header files modules will be built. # # If not set, the system will simply pick one of the installed MPMs. # # The implementation of the logic is in /usr/share/apache2/find_mpm, # a script which can be used standalone as well if needed. # APACHE_MPM="" ## Type: string ## Default: "" ## ServiceReload: apache2 # # email address of the server administrator (ServerAdmin directive) # This address is added to the server's responses if APACHE_SERVERSIGNATURE # is set to "email". # # If empty ("") it defaults to webmaster@$FQHOSTNAME, where FQHOSTNAME is # taken from /etc/HOSTNAME. # # Note that ServerAdmin directives inside VirtualHost statements are not # changed, even not the one in the stock SSL virtual host block. # APACHE_SERVERADMIN="" ## Type: string ## Default: "" ## ServiceReload: apache2 # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If this is not set to valid DNS name for your host, server-generated # redirections will not work. See also the UseCanonicalName directive. # # If your host doesn't have a registered DNS name, enter its IP address here. # You will have to access it by its address anyway, and this will make # redirections work in a sensible way. # APACHE_SERVERNAME="" ## Type: integer ## Default: 2 # # timeout during server startup (seconds) # after this time, the start script decides wether the httpd process started without error. # # Increase it, if you use mod_ssl and your certificate is passphrase protected! # APACHE_START_TIMEOUT="2" ## Type: list(on,off,email) ## Default: "on" ## ServiceReload: apache2 # # Configures the footer on server-generated documents # This correlates to the ServerSignature directive. # APACHE_SERVERSIGNATURE="on" ## Type: list(debug,info,notice,warn,error,crit,alert,emerg) ## Default: "warn" ## ServiceReload: apache2 # # LogLevel: Control the number of messages logged to the error_log. # APACHE_LOGLEVEL="warn" ## Type: string ## Default: "/var/log/apache2/access_log combined" ## ServiceRestart: apache2 # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrarywise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # # Simply set it to empty, if you configure it yourself somewhere else. # # Examples: # # If you would like to have agent and referer logfiles: # # setting it to "/var/log/apache2/referer_log referer, /var/log/apache2/agent_log agent" # corresponds to # CustomLog /var/log/apache2/referer_log referer # CustomLog /var/log/apache2/agent_log agent # # If you prefer a single logfile with access, agent, and referer information # (Combined Logfile Format): # # setting it to "/var/log/apache2/access_log combined" # corresponds to # CustomLog /var/log/apache2/access_log combined # APACHE_ACCESS_LOG="/var/log/apache2/access_log combined" ## Type: list(On,Off,DNS) ## Default: "Off" ## ServiceReload: apache2 # # UseCanonicalName: Determines how Apache constructs self-referencing # URLs and the SERVER_NAME and SERVER_PORT variables. # When set "Off", Apache will use the Hostname and Port supplied # by the client. When set "On", Apache will use the value of the # ServerName directive. # APACHE_USE_CANONICAL_NAME="off" ## Type: list(Major,Minor,Minimal,ProductOnly,OS,Full) ## Default: "OS" ## ServiceReload: apache2 # # How much information the server response header field contains about the server. # (installed modules, versions, etc.) # see http://httpd.apache.org/docs-2.2/mod/core.html#servertokens # APACHE_SERVERTOKENS="OS" ## Type: list(on,off) ## Default: "off" ## ServiceReload: apache2 # # If mod_status is used, include extended information about the server, like # CPU usage, in the status report. It is a server-wide setting, and it can cost # some performance! # APACHE_EXTENDED_STATUS="off" -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 4

[opensuse-factory] laptop with core 2 duo shows only one core
by Bruce Ferrell 06 May '13

06 May '13

The hardware lister says I have two cores: lshw -C cpu *-cpu description: CPU product: Intel(R) Core(TM)2 Duo CPU T9500 @ 2.60GHz vendor: Intel Corp. physical id: 400 bus info: cpu@0 slot: Microprocessor size: 2600MHz capacity: 2600MHz width: 64 bits clock: 200MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm ida dtherm tpr_shadow vnmi flexpriority configuration: cores=2 enabledcores=2 threads=2 inxi shows me I'm running in uniprocessor mode: inxi -c 0 -F System: Host: <hostname> Kernel: 3.8.9-5-desktop x86_64 (64 bit) Console tty 1 Distro: openSUSE 12.3 (x86_64) VERSION = 12.3 CODENAME = Dartmouth Machine: System: Dell (portable) product: MXG071 serial: XXXXXXXXX Mobo: Dell model: 0KX412 serial: .YYYYYYYYYY. Bios: Dell version: A11 date: 04/23/2010 CPU: Single core Intel Core2 Duo CPU T9500 (-UP-) cache: 6144 KB flags: (lm nx sse sse2 sse3 sse4_1 ssse3 vmx) clocked at 2592.643 MHz Graphics: Card: NVIDIA G84 [GeForce 8700M GT] X.org: 1.13.2 driver: nvidia tty size: 190x54 Advanced Data: N/A for root out of X Audio: Card: Intel 82801H (ICH8 Family) HD Audio Controller driver: snd_hda_intel Sound: ALSA ver: k3.8.9-5-desktop Network: Card-1: Broadcom NetXtreme BCM5754M Gigabit Ethernet PCI Express driver: tg3 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 00:23:ae:2d:3e:ff Card-2: Intel PRO/Wireless 4965 AG or AGN [Kedron] Network Connection driver: iwl4965 IF: wlan0 state: down mac: 00:21:5c:59:b1:bf Drives: HDD Total Size: 1320.3GB (36.4% used) 1: /dev/sdb WDC_WD10JPVT 1000.2GB 2: /dev/sda ST9320421ASG 320.1GB Partition: ID: / size: 60G used: 32G (54%) fs: ext3 ID: /home size: 226G used: 167G (78%) fs: ext3 ID: swap-1 size: 8.59GB used: 0.00GB (0%) fs: swap Sensors: System Temperatures: cpu: 62.5C mobo: N/A Fan Speeds (in rpm): cpu: N/A Info: Processes: 197 Uptime: 1:12 Memory: 1535.6/7985.0MB Runlevel: 5 Client: Shell inxi: 1.7.24 my grub boot options are: noapic nolapic apm=off noresume edd=off nohz=off hires=off processor.max_cstate=1 nomodeset resume=/dev/disk/by-id/ata-ST9320421ASG_5TJ0Q4HY-part2 splash=silent quiet showopts Can anyone tell me what I need to change to get my system to boot smp again? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

9 23

[opensuse-factory] Tumbleweed and KDE on the horizon?
by Roman Bysh 05 May '13

05 May '13

Hello List mates, Since GNOME was added to Tumbleweed. Can we expect to see KDE this month? Cheers! Roman ------------------------------------------------------- openSUSE -- Get it! Discover it! Share it! ------------------------------------------------------- http://linuxcounter.net/ #179293 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] unmasking (initial) password creation during installation (only)
by Felix Miata 04 May '13

04 May '13

About unmasking password entry on the initial sign-up form, very interesting: https://bugzilla.redhat.com/show_bug.cgi?id=958608 Fedora devel mailing list has a long thread. I was aghast initially, but after reading http://uxmovement.com/forms/why-password-masking-can-hurt-your-sign-up-form/ I'm inclined to think good idea here as well as there. WDYT for 13.1? -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Documentation changes on page and help needed on what do I need in my index.html to use a lamp stack for cacti ?
by doiggl＠velocitynet.com.au 02 May '13

02 May '13

Hello, What do I need in my index.html to use a lamp stack for cacti ? - I have no index.html in /srv/www/htdocs/ - Im trying to get cacti http://en.opensuse.org/Cacti to install/run on localhost[127.0.0.1] 1. Also can someone help/assist update the documentation details on this Cacti documentation web page http://en.opensuse.org/Cacti Some changes have been identified, see [6]for details on old/new lines. I am using this as a guide, but it looks like it is out of date by a version. 2. I am stuck on the configation part , can someone assist ? I've included a for list of Documentation changes, see[6] below. Thanks Glenn 127.0.0.1 I get following error: Access forbidden! You don't have permission to access the requested directory. There is either no index document or the directory is read-protected. If you think this is a server error, please contact the webmaster. Error 403 1. Using Cacti from http://download.opensuse.org/repositories/server:/monitoring/openSUSE_Facto… 2. Document root and file listing: # ls /srv/www/htdocs/ gif info2html.css 3. configuration files # ll /etc/apache2/vhosts.d/cacti.conf /srv/www/cacti/config.php -rw-r--r-- 1 root root 529 May 2 21:29 /etc/apache2/vhosts.d/cacti.conf -rw-r--r-- 1 wwwrun www 2114 May 2 21:31 /srv/www/cacti/config.php # cat /etc/apache2/vhosts.d/cacti.conf <VirtualHost *:80> ServerAdmin root@localhost ServerName localhost DocumentRoot /srv/www/cacti/ ErrorLog /var/log/apache2/cacti-error_log CustomLog /var/log/apache2/cacti-access_log combined HostnameLookups Off UseCanonicalName Off ServerSignature On <IfModule mod_userdir.c> UserDir public_html Include /etc/apache2/mod_userdir.conf </IfModule> <Directory "/usr/share/cacti"> Options Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> </VirtualHost> # cat /srv/www/cacti/config.php <?php /* +-------------------------------------------------------------------------+ | Copyright (C) 2004-2011 The Cacti Group | | | | This program is free software; you can redistribute it and/or | | modify it under the terms of the GNU General Public License | | as published by the Free Software Foundation; either version 2 | | of the License, or (at your option) any later version. | | | | This program is distributed in the hope that it will be useful, | | but WITHOUT ANY WARRANTY; without even the implied warranty of | | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | | GNU General Public License for more details. | +-------------------------------------------------------------------------+ | Cacti: The Complete RRDTool-based Graphing Solution | +-------------------------------------------------------------------------+ | This code is designed, written, and maintained by the Cacti Group. See | | about.php and/or the AUTHORS file for specific developer information. | +-------------------------------------------------------------------------+ | http://www.cacti.net/ | +-------------------------------------------------------------------------+ */ /* make sure these values refect your actual database/host/user/password */ $database_type = "mysql"; $database_default = "cactidb"; $database_hostname = "localhost"; $database_username = "cacti"; $database_password = "cacti"; $database_port = "3306"; $database_ssl = false; /* Edit this to point to the default URL of your Cacti install ex: if your cacti install as at http://serverip/cacti/ this would be set to /cacti/ */ $url_path = "/"; /* Default session name - Session name must contain alpha characters */ $cacti_session_name = "Cacti"; ?> 5. cacti installed on /srv/www/cacti/ # ls /srv/www/cacti/ about.php color.php graph_image.php graphs.php index.php poller_commands.php settings.php auth_changepassword.php data_input.php graph_settings.php graphs_items.php install poller_export.php templates_export.php auth_login.php data_queries.php graph_templates.php graphs_new.php lib resource templates_import.php cacti.sql data_sources.php graph_templates_inputs.php host.php logout.php rra tree.php cdef.php data_templates.php graph_templates_items.php host_templates.php plugins rra.php user_admin.php cli gprint_presets.php graph_view.php images plugins.php script_server.php utilities.php cmd.php graph.php graph_xport.php include poller.php scripts [6] List of Documentation changes identified. ############################################ source http://en.opensuse.org/Cacti old lines in documentation identified: ===================================== zypper ar http://download.opensuse.org/repositories/server:/monitoring/openSUSE_11.4/ server:monitoring zypper in mysql-community-server mysql-community-server-client zypper in cacti-PA cacti-PA-boost cacti-PA-clog cacti-PA-cycle cacti-PA-discovery cacti-PA-docs cacti-PA cacti-PA-flowview cacti-PA-hostinfo cacti-PA-loginmod cacti-PA-mactrack cacti-PA-monitor cacti-PA-npc cacti-PA-ntop cacti-PA-realtime cacti-PA-routerconfigs cacti-PA-settings cacti-PA-ssl cacti-PA-syslog cacti-PA-thold cacti-PA-tools cacti-PA-update new lines in documentation identified: ===================================== zypper ar http://download.opensuse.org/repositories/server:/monitoring/openSUSE_12.3/ server:monitoring zypper in mariadb zypper in cacti cacti-plugin-autom8 cacti-plugin-boost cacti-PA-clog cacti-plugin-cycle cacti-plugin-discovery cacti-plugin-docs cacti-plugin-flowview cacti-plugin-hostinfo cacti-plugin-loginmod cacti-plugin-mactrack cacti-plugin-monitor cacti-plugin-npc cacti-plugin-ntop cacti-plugin-realtime cacti-plugin-routerconfigs cacti-plugin-settings cacti-plugin-ssl cacti-plugin-syslog cacti-plugin-thold cacti-plugin-tools cacti-plugin-update Replace text in documentation: ============================= /usr/share/cacti/ to /srv/www/cacti/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] zypper dup new desktop kernel : something with Virtual Box maybe
by ellanios82 02 May '13

02 May '13

Hello List " Computing distribution upgrade... The following NEW package is going to be installed: kernel-desktop 1 new package to install. Overall download size: 39.3 MiB. After the operation, additional 117.6 MiB will be used. Continue? [y/n/?] (y): y (1/1) Installing: kernel-desktop-3.8.9-5.1 ................................<100%>[\] " - at this point zypper freezes : gets stuck, and does not install the new kernel in grub boot menu ......................... post script : _________ i see maybe a clue : upon killing zypper, there is a message : " Interrupted, cleaning up. warning: %post(kernel-desktop-3.8.9-5.1.i686) scriptlet failed, signal 2 " ................ p.p.s. _____ - looks like something to do with having a VirtualBox kernel on the grub menu : . . . find more messages : " Installation of kernel-desktop-3.8.9-5.1 failed: (with --nodeps --force) Error: Subprocess failed. Error: RPM failed: WARNING: Can't read module /lib/modules/3.8.9-5-desktop/weak-updates/updates/vboxdrv.ko: No such file or directory " ...................... thanks best regards -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 3

[opensuse-factory] Tumbleweed : libgtk-3.so.0 ? : gtk3 has been compiled against different glib2 version?
by ellanios82 02 May '13

02 May '13

Hello List Tumbleweed __________ - about 3 days ago after large 'zypper dup' , "xiphos" program stopped working, giving error message : (xiphos:6647): WARNING **: Error retrieving accessibility bus address: org.freedesktop.DBus.Error.ServiceUnknown: The name org.a11y.Bus was not provided by any .service files Error creating proxy: Error calling StartServiceByName for org.gtk.vfs.Daemon: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildSignaled: Process /usr/lib/gvfs/gvfsd received signal 6 (g-dbus-error-quark, 26) (xiphos:6647): GVFS-CRITICAL **: fill_mountable_info: assertion `proxy != NULL' failed ** Message: MAINTAINER_MODE /usr/bin/xiphos: symbol lookup error: /usr/lib/libgtk-3.so.0: undefined symbol: g_type_get_type_registration_serial _________________ - the xiphos program, and gtk3 and glib2 all come from tumbleweed repositories : zypper dup introduced the problem. ......................... - after todays large zypper dup, this problem persists ............... best regards -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 7