Mailinglist Archive: yast-commit (1271 mails)

< Previous Next >
[yast-commit] [ci_new_pac] JFYI yast2-network -> sle12
Script 'mail_helper' called by ro
Hello packager,

This is just FYI. Your package was checked in in distribution "sle12"
by autobuild-member: ro.

Here comes the log...

---------------------------%<------------------------------
Hi,

here is the log from ci_new_pac /mounts/work_src_done/SLE12/yast2-network ->
sle12



## BNC# 883836 : "Changing DHCP to DHCPv4+v6 in yast lan set
'DHCLIENT_SET_DEFAULT_ROUTE' to 'no' & breaks IPv4 routing" (RESOLVED/FIXED)

Changes:
--------
--- /work/SRC/SUSE:SLE-12:GA/yast2-network/yast2-network.changes
2014-09-17 17:15:02.000000000 +0200
+++ /mounts/work_src_done/SLE12/yast2-network/yast2-network.changes
2014-09-19 10:54:15.000000000 +0200
@@ -1,0 +2,7 @@
+Wed Sep 17 16:35:12 CEST 2014 - mvidner@xxxxxxxx
+
+- Really do not lose the default route
+ when editing an interface (bnc#883836#c15).
+- 3.1.100
+
+-------------------------------------------------------------------

calling whatdependson for sle12-i586
Packages directly triggered for rebuild:
- yast2-network
- at least 19 other packages
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/SUSE:SLE-12:GA/yast2-network (Old)
and /mounts/work_src_done/SLE12/yast2-network (BS:build ID:44335
MAIL:yast-commit@xxxxxxxxxxxx) (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Package is "yast2-network", Maintainer is "yast-commit@xxxxxxxxxxxx"


Old:
----
yast2-network-3.1.99.tar.bz2

New:
----
yast2-network-3.1.100.tar.bz2

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Other differences:
------------------
++++++ yast2-network.spec ++++++
--- /var/tmp/diff_new_pack.Eh2DhN/_old 2014-09-19 17:44:23.000000000 +0200
+++ /var/tmp/diff_new_pack.Eh2DhN/_new 2014-09-19 17:44:23.000000000 +0200
@@ -17,7 +17,7 @@


Name: yast2-network
-Version: 3.1.99
+Version: 3.1.100
Release: 0

BuildRoot: %{_tmppath}/%{name}-%{version}-build

++++++ yast2-network-3.1.99.tar.bz2 -> yast2-network-3.1.100.tar.bz2 ++++++
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' old/yast2-network-3.1.99/package/yast2-network.changes
new/yast2-network-3.1.100/package/yast2-network.changes
--- old/yast2-network-3.1.99/package/yast2-network.changes 2014-09-17
16:01:23.000000000 +0200
+++ new/yast2-network-3.1.100/package/yast2-network.changes 2014-09-19
10:51:26.000000000 +0200
@@ -1,4 +1,11 @@
-------------------------------------------------------------------
+Wed Sep 17 16:35:12 CEST 2014 - mvidner@xxxxxxxx
+
+- Really do not lose the default route
+ when editing an interface (bnc#883836#c15).
+- 3.1.100
+
+-------------------------------------------------------------------
Wed Sep 17 15:26:59 CEST 2014 - locilka@xxxxxxxx

- Do not check for / install packages in inst-sys (bnc#888130)
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' old/yast2-network-3.1.99/package/yast2-network.spec
new/yast2-network-3.1.100/package/yast2-network.spec
--- old/yast2-network-3.1.99/package/yast2-network.spec 2014-09-17
16:01:23.000000000 +0200
+++ new/yast2-network-3.1.100/package/yast2-network.spec 2014-09-19
10:51:26.000000000 +0200
@@ -17,7 +17,7 @@


Name: yast2-network
-Version: 3.1.99
+Version: 3.1.100
Release: 0

BuildRoot: %{_tmppath}/%{name}-%{version}-build
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' old/yast2-network-3.1.99/src/modules/LanItems.rb
new/yast2-network-3.1.100/src/modules/LanItems.rb
--- old/yast2-network-3.1.99/src/modules/LanItems.rb 2014-09-17
16:01:23.000000000 +0200
+++ new/yast2-network-3.1.100/src/modules/LanItems.rb 2014-09-19
10:51:26.000000000 +0200
@@ -32,7 +32,8 @@
# 2. Provides direct access to individual items of ifcfg files.
# For example BOOTPROTO and STARTMODE are accessible in
# {#bootproto} and {#startmode} (set via {#SetDeviceVars}
- # via {#Select} or {#SetItem}).
+ # via {#Select} or {#SetItem}). The reverse direction (putting
+ # the individual values back to an item) is {#Commit}.
#
# 3. ...
#
@@ -1644,39 +1645,36 @@
nil
end

- def GetDeviceVar(primary, fallback, key)
- primary = deep_copy(primary)
- fallback = deep_copy(fallback)
- ret = Ops.get_string(primary, key, Ops.get(fallback, key))
- Builtins.y2debug("%1 does not have a default defined", key) if ret == nil
- ret
- end
-
-
- # Set various device variables
- # @param [Hash] devmap map with variables
+ # Distributes an ifcfg hash to individual attributes.
+ # @param devmap [Hash] an ifcfg, values are strings
+ # @param defaults [Hash] should provide defaults for devmap
# @return [void]
def SetDeviceVars(devmap, defaults)
- devmap = deep_copy(devmap)
- defaults = deep_copy(defaults)
+ d = defaults.merge(devmap)
# address options
- @bootproto = GetDeviceVar(devmap, defaults, "BOOTPROTO")
- @ipaddr = GetDeviceVar(devmap, defaults, "IPADDR")
- @prefix = GetDeviceVar(devmap, defaults, "PREFIXLEN")
- @remoteip = GetDeviceVar(devmap, defaults, "REMOTE_IPADDR")
- @netmask = GetDeviceVar(devmap, defaults, "NETMASK")
- @set_default_route = GetDeviceVar(devmap, defaults,
"DHCLIENT_SET_DEFAULT_ROUTE") == "yes"
-
- @mtu = GetDeviceVar(devmap, defaults, "MTU")
- @ethtool_options = GetDeviceVar(devmap, defaults, "ETHTOOL_OPTIONS")
- @startmode = GetDeviceVar(devmap, defaults, "STARTMODE")
- @ifplugd_priority = GetDeviceVar(devmap, defaults, "IFPLUGD_PRIORITY")
- @description = GetDeviceVar(devmap, defaults, "NAME")
- @bond_option = GetDeviceVar(devmap, defaults, "BONDING_MODULE_OPTS")
- @vlan_etherdevice = GetDeviceVar(devmap, defaults, "ETHERDEVICE")
- @vlan_id = GetDeviceVar(devmap, defaults, "VLAN_ID") # FIXME, remember
that it can be implied from the name. probably
+ @bootproto = d["BOOTPROTO"]
+ @ipaddr = d["IPADDR"]
+ @prefix = d["PREFIXLEN"]
+ @remoteip = d["REMOTE_IPADDR"]
+ @netmask = d["NETMASK"]
+ @set_default_route = case d["DHCLIENT_SET_DEFAULT_ROUTE"]
+ when "yes"; true
+ when "no"; false
+ # all other values! count as unspecified
+ else nil
+ end
+
+ @mtu = d["MTU"]
+ @ethtool_options = d["ETHTOOL_OPTIONS"]
+ @startmode = d["STARTMODE"]
+ @ifplugd_priority = d["IFPLUGD_PRIORITY"]
+ @description = d["NAME"]
+ @bond_option = d["BONDING_MODULE_OPTS"]
+ @vlan_etherdevice = d["ETHERDEVICE"]
+ # FIXME, remember that it can be implied from the name. probably
+ @vlan_id = d["VLAN_ID"]

- @bridge_ports = GetDeviceVar(devmap, defaults, "BRIDGE_PORTS")
+ @bridge_ports = d["BRIDGE_PORTS"]

@bond_slaves = []
Builtins.foreach(devmap) do |key, value|
@@ -1688,93 +1686,52 @@
end

# tun/tap settings
- @tunnel_set_owner = GetDeviceVar(devmap, defaults, "TUNNEL_SET_OWNER")
- @tunnel_set_group = GetDeviceVar(devmap, defaults, "TUNNEL_SET_GROUP")
+ @tunnel_set_owner = d["TUNNEL_SET_OWNER"]
+ @tunnel_set_group = d["TUNNEL_SET_GROUP"]

# wireless options
- @wl_mode = GetDeviceVar(devmap, defaults, "WIRELESS_MODE")
- @wl_essid = GetDeviceVar(devmap, defaults, "WIRELESS_ESSID")
- @wl_nwid = GetDeviceVar(devmap, defaults, "WIRELESS_NWID")
- @wl_auth_mode = GetDeviceVar(devmap, defaults, "WIRELESS_AUTH_MODE")
- @wl_wpa_psk = GetDeviceVar(devmap, defaults, "WIRELESS_WPA_PSK")
- @wl_key_length = GetDeviceVar(devmap, defaults, "WIRELESS_KEY_LENGTH")
- @wl_key = [] # ensure exactly 4 entries
- Ops.set(@wl_key, 0, GetDeviceVar(devmap, defaults, "WIRELESS_KEY_0"))
- if Ops.get(@wl_key, 0, "") == ""
- Ops.set(@wl_key, 0, GetDeviceVar(devmap, defaults, "WIRELESS_KEY"))
- end
- Ops.set(@wl_key, 1, GetDeviceVar(devmap, defaults, "WIRELESS_KEY_1"))
- Ops.set(@wl_key, 2, GetDeviceVar(devmap, defaults, "WIRELESS_KEY_2"))
- Ops.set(@wl_key, 3, GetDeviceVar(devmap, defaults, "WIRELESS_KEY_3"))
-
- @wl_default_key = Builtins.tointeger(
- GetDeviceVar(devmap, defaults, "WIRELESS_DEFAULT_KEY")
- )
- @wl_nick = GetDeviceVar(devmap, defaults, "WIRELESS_NICK")
-
- @wl_wpa_eap = {}
- Ops.set(
- @wl_wpa_eap,
- "WPA_EAP_MODE",
- GetDeviceVar(devmap, defaults, "WIRELESS_EAP_MODE")
- )
- Ops.set(
- @wl_wpa_eap,
- "WPA_EAP_IDENTITY",
- GetDeviceVar(devmap, defaults, "WIRELESS_WPA_IDENTITY")
- )
- Ops.set(
- @wl_wpa_eap,
- "WPA_EAP_PASSWORD",
- GetDeviceVar(devmap, defaults, "WIRELESS_WPA_PASSWORD")
- )
- Ops.set(
- @wl_wpa_eap,
- "WPA_EAP_ANONID",
- GetDeviceVar(devmap, defaults, "WIRELESS_WPA_ANONID")
- )
- Ops.set(
- @wl_wpa_eap,
- "WPA_EAP_CLIENT_CERT",
- GetDeviceVar(devmap, defaults, "WIRELESS_CLIENT_CERT")
- )
- Ops.set(
- @wl_wpa_eap,
- "WPA_EAP_CLIENT_KEY",
- GetDeviceVar(devmap, defaults, "WIRELESS_CLIENT_KEY")
- )
- Ops.set(
- @wl_wpa_eap,
- "WPA_EAP_CLIENT_KEY_PASSWORD",
- GetDeviceVar(devmap, defaults, "WIRELESS_CLIENT_KEY_PASSWORD")
- )
- Ops.set(
- @wl_wpa_eap,
- "WPA_EAP_CA_CERT",
- GetDeviceVar(devmap, defaults, "WIRELESS_CA_CERT")
- )
- Ops.set(
- @wl_wpa_eap,
- "WPA_EAP_AUTH",
- GetDeviceVar(devmap, defaults, "WIRELESS_EAP_AUTH")
- )
- Ops.set(
- @wl_wpa_eap,
- "WPA_EAP_PEAP_VERSION",
- GetDeviceVar(devmap, defaults, "WIRELESS_PEAP_VERSION")
- )
+ @wl_mode = d["WIRELESS_MODE"]
+ @wl_essid = d["WIRELESS_ESSID"]
+ @wl_nwid = d["WIRELESS_NWID"]
+ @wl_auth_mode = d["WIRELESS_AUTH_MODE"]
+ @wl_wpa_psk = d["WIRELESS_WPA_PSK"]
+ @wl_key_length = d["WIRELESS_KEY_LENGTH"]
+ @wl_key = [
+ d["WIRELESS_KEY_0"],
+ d["WIRELESS_KEY_1"],
+ d["WIRELESS_KEY_2"],
+ d["WIRELESS_KEY_3"]
+ ]
+ if (@wl_key[0] || "").empty?
+ @wl_key[0] = d["WIRELESS_KEY"]
+ end
+
+ @wl_default_key = d["WIRELESS_DEFAULT_KEY"].to_i
+ @wl_nick = d["WIRELESS_NICK"]
+ @wl_wpa_eap = {
+ "WPA_EAP_MODE" => d["WIRELESS_EAP_MODE"],
+ "WPA_EAP_IDENTITY" => d["WIRELESS_WPA_IDENTITY"],
+ "WPA_EAP_PASSWORD" => d["WIRELESS_WPA_PASSWORD"],
+ "WPA_EAP_ANONID" => d["WIRELESS_WPA_ANONID"],
+ "WPA_EAP_CLIENT_CERT" => d["WIRELESS_CLIENT_CERT"],
+ "WPA_EAP_CLIENT_KEY" => d["WIRELESS_CLIENT_KEY"],
+ "WPA_EAP_CLIENT_KEY_PASSWORD" => d["WIRELESS_CLIENT_KEY_PASSWORD"],
+ "WPA_EAP_CA_CERT" => d["WIRELESS_CA_CERT"],
+ "WPA_EAP_AUTH" => d["WIRELESS_EAP_AUTH"],
+ "WPA_EAP_PEAP_VERSION" => d["WIRELESS_PEAP_VERSION"]
+ }
+ @wl_channel = d["WIRELESS_CHANNEL"]
+ @wl_frequency = d["WIRELESS_FREQUENCY"]
+ @wl_bitrate = d["WIRELESS_BITRATE"]
+ @wl_accesspoint = d["WIRELESS_AP"]
+ @wl_power = d["WIRELESS_POWER"] == "yes"
+ @wl_ap_scanmode = d["WIRELESS_AP_SCANMODE"]

- @wl_channel = GetDeviceVar(devmap, defaults, "WIRELESS_CHANNEL")
- @wl_frequency = GetDeviceVar(devmap, defaults, "WIRELESS_FREQUENCY")
- @wl_bitrate = GetDeviceVar(devmap, defaults, "WIRELESS_BITRATE")
- @wl_accesspoint = GetDeviceVar(devmap, defaults, "WIRELESS_AP")
- @wl_power = GetDeviceVar(devmap, defaults, "WIRELESS_POWER") == "yes"
- @wl_ap_scanmode = GetDeviceVar(devmap, defaults, "WIRELESS_AP_SCANMODE")
# s/390 options
# We always have to set the MAC Address for qeth Layer2 support
- @qeth_macaddress = GetDeviceVar(devmap, defaults, "LLADDR")
+ @qeth_macaddress = d["LLADDR"]

- @ipoib_mode = GetDeviceVar(devmap, defaults, "IPOIB_MODE")
+ @ipoib_mode = d["IPOIB_MODE"]

@aliases = Ops.get_map(devmap, "_aliases", {})

@@ -1786,14 +1743,13 @@
# @param [Hash] devmap map with s390 specific attributes and its values
# @param [Hash] defaults map with default values for attributes not found
in devmap
def SetS390Vars(devmap, defaults)
- devmap = deep_copy(devmap)
- defaults = deep_copy(defaults)
return if !Arch.s390
+ d = defaults.merge(devmap)

- @qeth_portname = GetDeviceVar(devmap, defaults, "QETH_PORTNAME")
- @qeth_portnumber = GetDeviceVar(devmap, defaults, "QETH_PORTNUMBER")
- @qeth_layer2 = GetDeviceVar(devmap, defaults, "QETH_LAYER2") == "yes"
- @qeth_chanids = GetDeviceVar(devmap, defaults, "QETH_CHANIDS")
+ @qeth_portname = d["QETH_PORTNAME"]
+ @qeth_portnumber = d["QETH_PORTNUMBER"]
+ @qeth_layer2 = d["QETH_LAYER2"] == "yes"
+ @qeth_chanids = d["QETH_CHANIDS"]

# qeth attribute. FIXME: currently not read from system.
@ipa_takeover = Ops.get_string(defaults, "IPA_TAKEOVER", "") == "yes"
@@ -1867,6 +1823,7 @@
end

# Select the given device
+ # FIXME currently *dev* is always ""
# @param [String] dev device to select ("" for new device, default values)
# @return true if success
def Select(dev)
@@ -1910,10 +1867,13 @@
true
end

+ TRISTATE_TO_S = { nil => nil, false => "no", true => "yes" }.freeze
+
# Sets device map items related to dhclient
def setup_dhclient_options(devmap)
- devmap["DHCLIENT_SET_DEFAULT_ROUTE"] = @set_default_route ? "yes" : "no"
if isCurrentDHCP
-
+ if isCurrentDHCP
+ devmap["DHCLIENT_SET_DEFAULT_ROUTE"] =
TRISTATE_TO_S.fetch(@set_default_route)
+ end
return devmap
end

diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' old/yast2-network-3.1.99/test/Makefile.am
new/yast2-network-3.1.100/test/Makefile.am
--- old/yast2-network-3.1.99/test/Makefile.am 2014-09-17 16:01:23.000000000
+0200
+++ new/yast2-network-3.1.100/test/Makefile.am 2014-09-19 10:51:26.000000000
+0200
@@ -1,8 +1,10 @@
TESTS = \
bridge_test.rb \
+ default_route_test.rb \
edit_nic_name_test.rb \
install_inf_convertor_test.rb \
lan_items_helpers_test.rb \
+ lan_items_read_test.rb \
lan_test.rb \
lan_udev_auto_test.rb \
link_handlers_test.rb \
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' old/yast2-network-3.1.99/test/default_route_test.rb
new/yast2-network-3.1.100/test/default_route_test.rb
--- old/yast2-network-3.1.99/test/default_route_test.rb 1970-01-01
01:00:00.000000000 +0100
+++ new/yast2-network-3.1.100/test/default_route_test.rb 2014-09-19
10:51:26.000000000 +0200
@@ -0,0 +1,136 @@
+#!/usr/bin/env rspec
+
+require_relative "test_helper"
+
+require "yast"
+
+# A two level section/key => value store
+# to remember values of /etc/sysconfig/network/ifcfg-*
+class SectionKeyValue
+ def initialize
+ @sections = {}
+ end
+
+ def sections
+ @sections.keys
+ end
+
+ def keys(section)
+ @sections[section].keys
+ end
+
+ def get(section, key)
+ @sections[section][key]
+ end
+
+ def set(section, key, value)
+ section_hash = @sections[section] ||= {}
+ section_hash[key] = value
+ end
+end
+
+describe "Yast::LanItemsClass" do
+ subject { Yast::LanItems }
+
+ before do
+ Yast.import "LanItems"
+ Yast.import "LanUdevAuto"
+
+ @ifcfg_files = SectionKeyValue.new
+
+ # network configs
+ allow(Yast::SCR).to receive(:Dir) do |path|
+ case path.to_s
+ when ".network.section"
+ @ifcfg_files.sections
+ when /^\.network\.value\."(eth\d+)"$/
+ @ifcfg_files.keys($1)
+ when ".modules.options", ".etc.install_inf"
+ []
+ else
+ raise "Unexpected Dir #{path}"
+ end
+ end
+
+ allow(Yast::SCR).to receive(:Read) do |path|
+ if path.to_s =~ /^\.network\.value\."(eth\d+)".(.*)/
+ @ifcfg_files.get($1, $2)
+ else
+ raise "Unexpected Read #{path}"
+ end
+ end
+
+ allow(Yast::SCR).to receive(:Write) do |path, value|
+ if path.to_s =~ /^\.network\.value\."(eth\d+)".(.*)/
+ @ifcfg_files.set($1, $2, value)
+ elsif path.to_s == ".network" && value.nil?
+ true
+ else
+ raise "Unexpected Write #{path}, #{value}"
+ end
+ end
+
+ # stub NetworkInterfaces, apart from the ifcfgs
+ allow(Yast::NetworkInterfaces).
+ to receive(:CleanHotplugSymlink)
+ allow(Yast::NetworkInterfaces).
+ to receive(:GetTypeFromSysfs).
+ with(/eth\d+/).
+ and_return "eth"
+ allow(Yast::NetworkInterfaces).
+ to receive(:GetType).
+ with(/eth\d+/).
+ and_return "eth"
+ allow(Yast::NetworkInterfaces).
+ to receive(:GetType).
+ with("").
+ and_return nil
+
+ allow(Yast::LanUdevAuto).
+ to receive(:AllowUdevModify).and_return false
+
+ # These "expect" should be "allow", but then it does not work out,
+ # because SCR multiplexes too much and the matchers get confused.
+
+ # Hardware detection
+ expect(Yast::SCR).
+ to receive(:Read).
+ with(Yast::Path.new(".probe.netcard")).
+ and_return([])
+
+ # miscellaneous uninteresting but hard to avoid stuff
+
+ allow(Yast::Arch).to receive(:architecture).and_return "x86_64"
+ allow(Yast::Confirm).to receive(:Detection).and_return true
+
+ expect(Yast::SCR).
+ to receive(:Read).
+ with(Yast::Path.new(".etc.install_inf.BrokenModules")).
+ and_return ""
+ expect(Yast::SCR).
+ to receive(:Read).
+ with(Yast::Path.new(".udev_persistent.net")).
+ and_return({})
+ expect(Yast::SCR).
+ to receive(:Read).
+ with(Yast::Path.new(".udev_persistent.drivers")).
+ and_return({})
+ end
+
+ it "does not modify DHCLIENT_SET_DEFAULT_ROUTE if not explicitly set, when
editing an ifcfg" do
+ @ifcfg_files.set("eth0", "STARTMODE", "auto")
+ @ifcfg_files.set("eth0", "BOOTPROTO", "dhcp4")
+
+ subject.Read
+ subject.current = 0
+ subject.SetItem
+
+ subject.bootproto = "dhcp"
+
+ subject.Commit
+ subject.write
+
+ ifcfg = Yast::NetworkInterfaces.FilterDevices("")["eth"]["eth0"]
+ expect(ifcfg["DHCLIENT_SET_DEFAULT_ROUTE"]).to be_nil
+ end
+end
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' old/yast2-network-3.1.99/test/lan_items_read_test.rb
new/yast2-network-3.1.100/test/lan_items_read_test.rb
--- old/yast2-network-3.1.99/test/lan_items_read_test.rb 1970-01-01
01:00:00.000000000 +0100
+++ new/yast2-network-3.1.100/test/lan_items_read_test.rb 2014-09-19
10:51:26.000000000 +0200
@@ -0,0 +1,87 @@
+#!/usr/bin/env rspec
+
+require_relative "test_helper"
+
+require "yast"
+Yast.import "LanItems"
+
+describe "LanItemsClass" do
+ subject { Yast::LanItems }
+
+ describe "#SetDeviceVars" do
+ let(:defaults) do
+ {
+ "WIRELESS_KEY" => "",
+ "WIRELESS_KEY_0" => "",
+ "WIRELESS_KEY_1" => "",
+ "WIRELESS_KEY_2" => "",
+ "WIRELESS_KEY_3" => ""
+ }
+ end
+
+ it "reads value from sysconfig data" do
+ subject.SetDeviceVars({"BOOTPROTO" => "dhcp8"}, {"BOOTPROTO" => "dhcp7"})
+ expect(subject.bootproto).to eq "dhcp8"
+ end
+
+ it "reads value from default data" do
+ subject.SetDeviceVars({}, {"BOOTPROTO" => "dhcp7"})
+ expect(subject.bootproto).to eq "dhcp7"
+ end
+
+ it "reads nil if neither hash specifies the data" do
+ subject.SetDeviceVars({}, {})
+ expect(subject.bootproto).to eq nil
+ end
+
+ it "converts set_default_route" do
+ subject.SetDeviceVars({"DHCLIENT_SET_DEFAULT_ROUTE" => "yes"}, defaults)
+ expect(subject.set_default_route).to eq true
+
+ subject.SetDeviceVars({"DHCLIENT_SET_DEFAULT_ROUTE" => "no"}, defaults)
+ expect(subject.set_default_route).to eq false
+
+ subject.SetDeviceVars({}, defaults)
+ expect(subject.set_default_route).to eq nil
+
+ subject.SetDeviceVars({"DHCLIENT_SET_DEFAULT_ROUTE" => "unrecognized"},
defaults)
+ expect(subject.set_default_route).to eq nil
+ end
+
+ it "converts wl_power" do
+ subject.SetDeviceVars({"WIRELESS_POWER" => "yes"}, defaults)
+ expect(subject.wl_power).to eq true
+ end
+
+ it "makes wl_key a 4-tuple when 1 key is specified" do
+ subject.SetDeviceVars({"WIRELESS_KEY" => "k0"}, defaults)
+ expect(subject.wl_key).to eq ["k0", "", "", ""]
+ end
+
+ it "makes wl_key a 4-tuple when 2 keys are specified" do
+ subject.SetDeviceVars({"WIRELESS_KEY_0" => "k00", "WIRELESS_KEY_1" =>
"k01"}, defaults)
+ expect(subject.wl_key).to eq ["k00", "k01", "", ""]
+ end
+
+ it "makes wl_wpa_eap a hash, with renamed kes" do
+ subject.SetDeviceVars({
+ "WIRELESS_EAP_MODE" => "foo",
+ "WIRELESS_PEAP_VERSION" => "bar"
+ }, {})
+ expect(subject.wl_wpa_eap["WPA_EAP_MODE"]).to eq "foo"
+ expect(subject.wl_wpa_eap["WPA_EAP_PEAP_VERSION"]).to eq "bar"
+ end
+ end
+
+ describe "#SetS390Vars" do
+ let(:defaults) { { } }
+
+ it "converts qeth_layer2" do
+ expect(Yast::Arch).to receive(:s390).and_return true
+
+ subject.SetS390Vars({"QETH_LAYER2" => "yes"}, defaults)
+ expect(subject.qeth_layer2).to eq true
+ end
+
+ end
+end
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore'
old/yast2-network-3.1.99/test/network_autoconfiguration_test.rb
new/yast2-network-3.1.100/test/network_autoconfiguration_test.rb
--- old/yast2-network-3.1.99/test/network_autoconfiguration_test.rb
2014-09-17 16:01:23.000000000 +0200
+++ new/yast2-network-3.1.100/test/network_autoconfiguration_test.rb
2014-09-19 10:51:26.000000000 +0200
@@ -171,7 +171,7 @@
it "configures just one NIC to have a default route" do
expect { instance.configure_dhcp }.to_not raise_error
result = Yast::NetworkInterfaces.FilterDevices("")
- expect(result["eth"]["eth0"]["DHCLIENT_SET_DEFAULT_ROUTE"]).to eq "yes"
- expect(result["eth"]["eth1"]["DHCLIENT_SET_DEFAULT_ROUTE"]).to eq "no"
+ expect(result["eth"]["eth0"]["DHCLIENT_SET_DEFAULT_ROUTE"]).to eq "yes"
+ expect(result["eth"]["eth1"]["DHCLIENT_SET_DEFAULT_ROUTE"]).to_not eq "yes"
end
end

continue with "q"...


Checked in at Fri Sep 19 17:44:33 CEST 2014 by ro

Remember to have fun...

--
To unsubscribe, e-mail: yast-commit+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: yast-commit+help@xxxxxxxxxxxx

< Previous Next >
This Thread