Author: gs Date: Tue Jul 19 14:08:03 2011 New Revision: 64882 URL: http://svn.opensuse.org/viewcvs/yast?rev=64882&view=rev Log: AutoYaST support added Modified: trunk/fcoe-client/src/FcoeClient.ycp trunk/fcoe-client/src/fcoe-client_auto.ycp trunk/fcoe-client/src/fcoe-client_finish.ycp Modified: trunk/fcoe-client/src/FcoeClient.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/src/FcoeClient.ycp?rev=64882&r1=64881&r2=64882&view=diff ============================================================================== --- trunk/fcoe-client/src/FcoeClient.ycp (original) +++ trunk/fcoe-client/src/FcoeClient.ycp Tue Jul 19 14:08:03 2011 @@ -43,6 +43,7 @@ import "Package"; import "Popup"; import "Service"; +import "NetworkService"; /** * Prototypes @@ -645,6 +646,8 @@ string syslog_val = (string)SCR::Read(add(.fcoe, "USE_SYSLOG")); fcoe_general_config = add( fcoe_general_config, "USE_SYSLOG", syslog_val ); + y2milestone( "/etc/fcoe/config read - DEBUG: %1, USE_SYSLOG: %2", debug_val, syslog_val ); + return true; } @@ -683,7 +686,7 @@ card["fcoe_vlan"]:"" != FcoeClient::NOT_CONFIGURED && Modified() ) // and data are modified { string content = (string)SCR::Read( .target.string, card["cfg_file"]:"" ); - y2milestone( "Original content of %1: %2", card["cfg_file"]:"", content ); + y2debug( "Original content of %1: %2", card["cfg_file"]:"", content ); list <string> lines = (list<string>)splitstring( content, "\n" ); lines = maplist( string line, lines, { @@ -701,7 +704,7 @@ } }); content = mergestring( lines, "\n" ); - y2milestone( "Modified content: %1", content ); + y2milestone( "Writing content: %1", content ); boolean ret = SCR::Write( .target.string, card["cfg_file"]:"", content ); if ( !ret ) @@ -714,10 +717,6 @@ y2milestone( "%1 written", card["cfg_file"]:"" ); } } - else - { - y2milestone( "%1 not configured for FCoE", card["dev_name"]:"" ); - } } ); return success; @@ -775,8 +774,8 @@ "" ); - // TODO - is this check needed here (like in IsciClient.ycp) - // if(!NetworkService::RunningNetworkPopup()) return false; + // check if network services are running + if(!NetworkService::RunningNetworkPopup()) return false; if(PollAbort()) return false; Progress::NextStage(); @@ -866,12 +865,13 @@ ], "" ); - // TODO things to do in case of Mode::autoinst()/autoupgrade() ??? - // see IscsiClient.ycp, line 236, 241 - // TODO is_running - used or obsolete ??? + // iscsi-client prepares for AutoYaST in Mode::autoinst()/autoupgrade() + // (see IscsiClient.ycp, line 236, 241) + // These things are done in fcoe-client_auto.ycp (should be sufficient there) + boolean is_running = Progress::IsRunning(); - y2milestone( "**** Progress still running: %1", is_running ); + y2debug( "**** Progress still running: %1", is_running ); // write settings if(PollAbort()) return false; @@ -902,7 +902,8 @@ // adjust start status of services lldpad and fcoe AdjustStartStatus(); - // TODO - add additional package ??? like in IscsiClient.ycp, line 257 + // Adding additional package (like in IscsiClient.ycp, line 257) + // is done in inst_fcoe-client.ycp (PackagesProposal::AddResolvables) sleep(sl); if(PollAbort()) return false; @@ -964,16 +965,12 @@ summary = Summary::AddLine( summary, _("<b>Interfaces</b>") ); netcards = FcoeClient::GetNetworkCards(); foreach ( map card, netcards, { - summary = Summary::AddLine( summary, sformat( "%1: %2 %3: %4 %5: %6 %7: %8", + summary = Summary::AddLine( summary, sformat( "%1: %2 %3: %4", // network card, e.g. eth0 _("<i>Netcard</i>:"), card["dev_name"]:"", // nothing to translate here (abbreviation for // Fibre Channel over Ethernet Virtual LAN interface) - "<i>FCoE VLAN</i>", card["fcoe_vlan"]:"", - // nothing to translate, options from config file - "FCOE_ENABLE", card["fcoe_enable"]:"", - "DCB_REQUIRED", card["dcb_required"]:"" ) ); - + "<i>FCoE VLAN</i>", card["fcoe_vlan"]:"" ) ); } ); service_start = FcoeClient::GetStartStatus(); summary = Summary::AddLine( summary, _("<b>Starting of services</b>") ); Modified: trunk/fcoe-client/src/fcoe-client_auto.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/src/fcoe-client_auto.ycp?rev=64882&r1=64881&r2=64882&view=diff ============================================================================== --- trunk/fcoe-client/src/fcoe-client_auto.ycp (original) +++ trunk/fcoe-client/src/fcoe-client_auto.ycp Tue Jul 19 14:08:03 2011 @@ -96,86 +96,139 @@ /* Write given settings */ else if (func == "Write") { import "Progress"; - boolean write = true; boolean progress_orig = Progress::set (false); - // prepare for AutoYaST: check imported data and if required create the - // FCoE VLAN interfaces before calling FCoEClient::Write() - - list<map> netcards = FcoeClient::GetNetworkCards(); - y2milestone( "Netcards: %1", netcards ); + boolean success = true; + boolean start_fcoe = false; + list<map> detected_netcards = []; + integer index = 0; - foreach ( map card, netcards, { - string vlan_interface = ""; - string fcoe_vlan_interface = ""; - string command = ""; - map output = $[]; - string ifcfg_file = ""; - - if ( card["fcoe_vlan"]:"" != FcoeClient::NOT_AVAILABLE && - card["fcoe_vlan"]:"" != FcoeClient::NOT_CONFIGURED ) - { - ifcfg_file = sformat( "/etc/sysconfig/network/ifcfg-%1\.%2", card["dev_name"]:"", card["vlan_interface"]:"" ); - - // if /etc/sysconfig/network/ifcfg-<vlan-interface> already exists - // call 'ifup' for the interface (creates /proc/net/vlan/<vlan-interface>) - if ( FileUtils::Exists( ifcfg_file ) ) - { - command = sformat( "ifup %1\.%2", card["dev_name"]:"", card["vlan_interface"]:"" ); - y2milestone( "Executing command: %1", command ); - output = (map)SCR::Execute( .target.bash_output, command ); - y2milestone( "Output: %1", output ); + // prepare for AutoYaST + list<map> imported_netcards = FcoeClient::GetNetworkCards(); + y2milestone( "Imported information about netcards: %1", imported_netcards ); + + // AutoYaST will install package 'open-fcoe' ( checks AutoPackages() ) - if ( output["exit"]:255 == 0 ) - { - // start FCoE - command = sformat( "fipvlan -s %1", card["dev_name"]:"" ); - } - } - else // create VLAN interface and start FCoE + // Start services 'fcoe' and 'lldpad' + success = FcoeClient::ServiceStatus(); + if ( success ) + { + y2milestone( "Services fcoe and lldpad started" ); + } + else + { + y2error( "Cannot start services - stopping auto installation" ); + return false; + } + // Reset info about netcards and get current values + FcoeClient::ResetNetworkCards(); + success = FcoeClient::DetectNetworkCards(); + if ( success ) + { + detected_netcards = FcoeClient::GetNetworkCards(); + y2milestone( "Information about detected netcards: %1", detected_netcards ); + } + else + { + y2error( "Cannot detect network cards - stopping auto installation" ); + return false; + } + + // Check imported data + foreach ( map card, imported_netcards, { + if ( card["fcoe_vlan"]:"" != FcoeClient::NOT_AVAILABLE && + card["fcoe_vlan"]:"" != FcoeClient::NOT_CONFIGURED ) { - command = sformat( "fipvlan -c -s %1", card["dev_name"]:"" ); - y2milestone( "Executing command: %1", command ); - output = (map)SCR::Execute( .target.bash_output, command ); - y2milestone( "Output: %1", output ); + // any FCoE VLAN interface is configured + start_fcoe = true; } - - if ( output["exit"]:255 != 0 ) - { - y2error( "Cannot create and start FCoE on %1", card["dev_name"]:"" ); - write = false; // don't write configuration - } - else - { - // check FCoE VLAN interface - vlan_interface = FcoeClient::GetVlanInterface( card["dev_name"]:"" ); - fcoe_vlan_interface = FcoeClient::GetFcoeVlanInterface( card["dev_name"]:"", - vlan_interface ); - if ( fcoe_vlan_interface != card["fcoe_vlan"]:"" ) - { - y2error( "FCoE VLAN interfaces differ. Created: %1, imported: %2", - fcoe_vlan_interface, card["fcoe_vlan"]:"" ); - write = false; // don't write configuration - } - else + } ); + + // If any FcoE interface is found in imported data we try to start FCoE + // for all interfaces which are not yet configured, i.e. where starting of + // FCoE is possible. We can not start exactly the interface from imported + // data because the numeration of interfaces (eth0, eth1...) may differ. + if ( start_fcoe ) + { + foreach ( map card, detected_netcards, { + string vlan_interface = ""; + string fcoe_vlan_interface = ""; + string command = ""; + map output = $[]; + string ifcfg_file = ""; + map status_map = $[]; + + if ( card["fcoe_vlan"]:"" == FcoeClient::NOT_CONFIGURED ) { - // read or create /etc/fcoe/ethx file - FcoeClient::GetFCoEStatus( fcoe_vlan_interface ); - } - } - } - }); + ifcfg_file = sformat( "/etc/sysconfig/network/ifcfg-%1\.%2", card["dev_name"]:"", + card["vlan_interface"]:"" ); + // if /etc/sysconfig/network/ifcfg-<vlan-interface> already exists + // call 'ifup' for the interface (creates /proc/net/vlan/<vlan-interface>) + if ( FileUtils::Exists( ifcfg_file ) ) + { + command = sformat( "ifup %1\.%2", card["dev_name"]:"", card["vlan_interface"]:"" ); + y2milestone( "Executing command: %1", command ); + output = (map)SCR::Execute( .target.bash_output, command ); + y2milestone( "Output: %1", output ); - if ( write ) - { - // FcoeClient::SetModified(true) is called in FcoeClient::Import(), - // i.e. modified is set before calling FcoeClient::Write() - ret = FcoeClient::Write(); - } - else // don't continue in case of error - { - ret = false; + if ( output["exit"]:255 == 0 ) + { + // start FCoE + command = sformat( "fipvlan -s %1", card["dev_name"]:"" ); + } + } + else // create VLAN interface and start FCoE + { + command = sformat( "fipvlan -c -s %1", card["dev_name"]:"" ); + y2milestone( "Executing command: %1", command ); + output = (map)SCR::Execute( .target.bash_output, command ); + y2milestone( "Output: %1", output ); + } + + if ( output["exit"]:255 != 0 ) + { + y2error( "Cannot create and start FCoE on %1", card["dev_name"]:"" ); + } + else // get FCoE VLAN interface + { + vlan_interface = FcoeClient::GetVlanInterface( card["dev_name"]:"" ); + if ( vlan_interface == "" ) + { + y2error( "VLAN interface not available for %1.", card["dev_name"]:"" ); + } + else + { + fcoe_vlan_interface = FcoeClient::GetFcoeVlanInterface( card["dev_name"]:"", + vlan_interface ); + if ( fcoe_vlan_interface != "" ) + { + y2milestone( "FCoE VLAN interface %1 created/started", fcoe_vlan_interface ); + // read or create /etc/fcoe/ethx file + status_map = FcoeClient::GetFCoEStatus( fcoe_vlan_interface ); + // apply modified data + detected_netcards[ index, "fcoe_vlan"] = fcoe_vlan_interface; + detected_netcards[ index, "cfg_file"] = status_map["Filename"]:""; + detected_netcards[ index, "fcoe_enable"] = status_map["FCOE_ENABLE"]:""; + detected_netcards[ index, "dcb_required"] = status_map["DCB_REQUIRED"]:""; + } + else + { + y2error( "FCoE VLAN interface not configured for %1", card["dev_name"]:"" ); + } + } + } + } + index = index + 1; + }); } + y2milestone( "Set NEW information about network cards: %1", detected_netcards ); + // Set new information about netcards + FcoeClient::SetNetworkCards( detected_netcards ); + + // FcoeClient::SetModified(true) is called in FcoeClient::Import(), + // i.e. modified is set before calling FcoeClient::Write() + ret = FcoeClient::Write(); + Progress::set (progress_orig); } /** Modified: trunk/fcoe-client/src/fcoe-client_finish.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/fcoe-client/src/fcoe-client_finish.ycp?rev=64882&r1=64881&r2=64882&view=diff ============================================================================== --- trunk/fcoe-client/src/fcoe-client_finish.ycp (original) +++ trunk/fcoe-client/src/fcoe-client_finish.ycp Tue Jul 19 14:08:03 2011 @@ -58,17 +58,17 @@ if ( card["fcoe_vlan"]:"" != FcoeClient::NOT_AVAILABLE && card["fcoe_vlan"]:"" != FcoeClient::NOT_CONFIGURED ) { - // FCoE VLAN interface is configured + // FCoE VLAN interface is configured -> start services start_services = true; } } ); + if ( start_services ) { + y2milestone( "Enabling service start of fcoe and lldpad" ); Service::Enable("fcoe"); Service::Enable("lldpad"); } - y2milestone("fcoe and lldpad services enabled"); - } else { -- To unsubscribe, e-mail: yast-commit+unsubscribe@opensuse.org For additional commands, e-mail: yast-commit+help@opensuse.org