(WW) RADEONHD(0): !!! Option HPD is set !!! This shall only be used to work around broken connector tables. Please report your findings to radeonhd@opensuse.org The simple fact is that I had to set it so as to prevent a debilitating error in Xorg, My ATI card is probably most easily and best described by means of lspci -v: 02:00.0 VGA compatible controller: ATI Technologies Inc RV530 [Radeon X1600] (prog-if 00 [VGA controller]) Subsystem: PC Partner Limited Device 0840 Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at d9000000 (64-bit, non-prefetchable) [size=64K] I/O ports at a000 [size=256] Expansion ROM at d8000000 [disabled] [size=128K] Capabilities: [50] Power Management version 2 Capabilities: [58] Express Endpoint, MSI 00 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- 02:00.1 Display controller: ATI Technologies Inc RV530 [Radeon X1600] (Secondary) Subsystem: PC Partner Limited Device 0841 Flags: fast devsel Memory at d9010000 (64-bit, non-prefetchable) [disabled] [size=64K] Capabilities: [50] Power Management version 2 Capabilities: [58] Express Endpoint, MSI 00 If you need any further particulars, I am ready to investigate my system for you. Thank you very much for your efforts to date! -- .............................................................. Willy Gommel www.wg3.net -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org