Hi, this is an AMD 690V on board chipset which has a single VGA connector (there exists also a 690G chipset with HDMI or DVI connector, I don't know exactly): lspci: 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon X1200 Series (prog-if 00 [VGA]) Subsystem: Giga-byte Technology Unknown device d000 Flags: bus master, fast devsel, latency 32, IRQ 18 Memory at d8000000 (64-bit, prefetchable) [size=128M] Memory at fdff0000 (64-bit, non-prefetchable) [size=64K] I/O ports at ee00 [size=256] Memory at fde00000 (32-bit, non-prefetchable) [size=1M] Capabilities: [50] Power Management version 2 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- ./rhd_conntest 01:05.0 Checking connectors on 0x791E, 0x1458, 0xD000 (@01:05:00): Load Detection: RHD_OUTPUT_DACA HotPlug: RHD_HPD_0 DDC: RHD_DDC_NONE LVDS Info: 18bits, single link, LDI Panel found. Power Timing: 0x000, 0x000, 0x00, 0x00, 0x000 Macro: 0x00000000, Clock Pattern: 0x00A1 Marc -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org