On 10/05/2012 02:37 PM, Per Jessen wrote:
[ 3.352300] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 3.352302] sd 0:0:1:0: [sda] [ 3.352303] Sense Key : Aborted Command [current] [descriptor] [ 3.352306] Descriptor sense data with sense descriptors (in hex): [ 3.352308] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3.352317] 00 00 00 00 [ 3.352322] sd 0:0:1:0: [sda] [ 3.352324] Add. Sense: Scsi parity error [ 3.352327] sd 0:0:1:0: [sda] CDB: [ 3.352328] Read(10): 28 00 00 00 00 00 00 00 08 00 [ 3.352336] end_request: I/O error, dev sda, sector 0 [ 3.352448] Buffer I/O error on device sda, logical block 0 [ 3.352555] ata1: EH complete [ 3.400372] ldm_validate_partition_table(): Disk read failed. [ 3.400764] sda: unable to read partition table [ 3.400969] sd 0:0:1:0: [sda] Attached SCSI disk That doesn't look good - can you access it using "fdisk /dev/sda" ?
Hello Per The output of fdisk /dev/sda : __________________ Command (m for help): p Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000bf499 Device Boot Start End Blocks Id System /dev/sda1 * 63 146802032 73400985 83 Linux /dev/sda2 146802033 461370735 157284351+ 83 Linux /dev/sda3 461370736 471861180 5245222+ 82 Linux swap / Solaris /dev/sda4 * 471861181 625137344 76638082 83 Linux Command (m for help): ....................... thank you best regards fdisk /dev/sda -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org