Hi, do you have a working firmware? Here is how to get it: http://redflo.de/tiki-index.php?page=Linux+VDR+Tips#Firmware On 01/14/2011 07:28 PM, benefici@fastmail.fm wrote:
Hi,
I've bought a Hauppauge WinTV-NOVA-HD-S2 card, which according to http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-HD-S2 should be "...supported in the stock Linux kernel since version 2.6.28, so ideally you should simply use 2.6.28 or later, ..." But my card is not detected, there are apparently no kernel modules loaded for the card and no message appears in dmesg. I tried the card under both openSUSE 11.2 and 11.3, with identical results. The card is listed by lspci as:
# lspci -vnn -s 01:07 01:07.0 Multimedia video controller [0400]: Conexant Systems, Inc. Device [14f1:0800] (rev 05) Subsystem: Hauppauge computer works Inc. Device [0070:6906] Flags: bus master, medium devsel, latency 32, IRQ 12 Memory at 21000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2
01:07.1 Multimedia controller [0480]: Conexant Systems, Inc. Device [14f1:0801] (rev 05) Subsystem: Hauppauge computer works Inc. Device [0070:6906] Flags: bus master, medium devsel, latency 32, IRQ 12 Memory at 22000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2
01:07.2 Multimedia controller [0480]: Conexant Systems, Inc. Device [14f1:0802] (rev 05) Subsystem: Hauppauge computer works Inc. Device [0070:6906] Flags: bus master, medium devsel, latency 32, IRQ 12 Memory at 23000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2
01:07.4 Multimedia controller [0480]: Conexant Systems, Inc. Device [14f1:0804] (rev 05) Subsystem: Hauppauge computer works Inc. Device [0070:6906] Flags: bus master, medium devsel, latency 32, IRQ 12 Memory at 24000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2
One thing I found suspicious is the PCI ID of the card: 14f1:0800. Based on http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-4000 I think this is expected to be 14f1:8800. Does anybody have an idea how to get the card to work?
Cheers, Tom