Good day, This is the output of LIBGL_DEBUG=verbose fglrxinfo libGL: XF86DRIGetClientDriverName: 8.77.5 fglrx (screen 0) ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 5, (OK) ukiOpenByBusid: ukiOpenMinor returns 5 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 Seems to be hanging on PC:2:0:0 Ouput of: cat Xorg.0.log | grep PCI [ 16.954] (--) PCI:*(0:2:0:0) 1002:9588:1462:0990 ATI Technologies Inc RV630 [Radeon HD 2600XT] rev 0, Mem @ 0xc0000000/268435456, 0xff4f0000/65536, I/O @ 0x0000c000/256, BIOS @ 0x????????/131072 [ 17.137] (II) Primary Device is: PCI 02@00:00:0 [ 17.143] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found [ 17.247] ukiOpenByBusid: Searching for BusID PCI:2:0:0 [ 17.247] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 [ 17.312] (II) fglrx(0): PCIE card detected [ 18.987] ukiOpenByBusid: Searching for BusID PCI:2:0:0 [ 18.987] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 [ 18.987] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0" [ 20.239] ukiOpenByBusid: Searching for BusID PCI:2:0:0 [ 20.239] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 Output of: cat Xorg.0.log | grep fglrx [ 16.998] (II) LoadModule: "fglrx" [ 16.999] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so [ 17.020] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." [ 17.021] (II) Loading sub module "fglrxdrm" [ 17.021] (II) LoadModule: "fglrxdrm" [ 17.021] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so [ 17.021] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." [ 17.137] (WW) Falling back to old probe method for fglrx [ 17.143] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found [ 17.144] (II) fglrx(0): pEnt->device->identifier=0x8021b0 [ 17.148] (II) fglrx(0): === [atiddxPreInit] === begin [ 17.149] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 [ 17.149] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 17.149] (==) fglrx(0): Default visual is TrueColor [ 17.149] (**) fglrx(0): Option "DPMS" "true" [ 17.149] (==) fglrx(0): RGB weight 888 [ 17.149] (II) fglrx(0): Using 8 bits per RGB [ 17.149] (==) fglrx(0): Buffer Tiling is ON [ 17.149] (II) Loading sub module "fglrxdrm" [ 17.149] (II) LoadModule: "fglrxdrm" [ 17.150] (II) Reloading /usr/lib64/xorg/modules/linux/libfglrxdrm.so [ 17.248] (==) fglrx(0): NoAccel = NO [ 17.248] (**) fglrx(0): ATI 2D Acceleration Architecture disabled, using XAA [ 17.248] (--) fglrx(0): Chipset: "ATI Radeon HD 2600 XT" (Chipset = 0x9588) [ 17.248] (--) fglrx(0): (PciSubVendor = 0x1462, PciSubDevice = 0x0990) [ 17.248] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI [ 17.248] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000 [ 17.248] (--) fglrx(0): MMIO registers at 0xff4f0000 [ 17.248] (--) fglrx(0): I/O port at 0x0000c000 [ 17.248] (==) fglrx(0): ROM-BIOS at 0x000c0000 [ 17.254] (II) fglrx(0): AC Adapter is used [ 17.269] (II) fglrx(0): Primary V_BIOS segment is: 0xc000 [ 17.272] (II) fglrx(0): VESA BIOS detected [ 17.272] (II) fglrx(0): VESA VBE Version 3.0 [ 17.272] (II) fglrx(0): VESA VBE Total Mem: 16384 kB [ 17.272] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS [ 17.272] (II) fglrx(0): VESA VBE OEM Software Rev: 10.53 [ 17.272] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. [ 17.272] (II) fglrx(0): VESA VBE OEM Product: RV630 [ 17.272] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 [ 17.312] (II) fglrx(0): ATI Video BIOS revision 9 or later detected [ 17.312] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3 [ 17.312] (II) fglrx(0): PCIE card detected [ 17.312] (--) fglrx(0): Using per-process page tables (PPPT) as GART. [ 17.312] (WW) fglrx(0): board is an unknown third party board, chipset is supported [ 17.313] (II) fglrx(0): Using adapter: 2:0.0. [ 17.345] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x20000000) [ 17.510] (II) fglrx(0): Interrupt handler installed at IRQ 50. [ 17.510] (II) fglrx(0): RandR 1.2 support is enabled! [ 17.510] (II) fglrx(0): RandR 1.2 rotation support is enabled! [ 17.510] (==) fglrx(0): Center Mode is disabled [ 17.511] (==) fglrx(0): Active stereo disabled [ 18.587] (II) fglrx(0): Finished Initialize PPLIB! [ 18.590] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0 [ 18.590] (II) fglrx(0): Output DFP2 has no monitor section [ 18.590] (II) fglrx(0): Output CRT1 has no monitor section [ 18.590] (II) fglrx(0): Output CRT2 has no monitor section [ 18.590] (II) fglrx(0): Output TV has no monitor section [ 18.590] (II) fglrx(0): Output CV has no monitor section [ 18.590] (II) fglrx(0): Connected Display0: CRT1 [ 18.590] (II) fglrx(0): Display0: Failed to get EDID information. [ 18.986] (II) fglrx(0): Cannot get EDID information for CRT1 [ 18.986] (II) fglrx(0): Output DFP1 disconnected [ 18.986] (II) fglrx(0): Output DFP2 disconnected [ 18.986] (II) fglrx(0): Output CRT1 connected [ 18.986] (II) fglrx(0): Output CRT2 disconnected [ 18.986] (II) fglrx(0): Output TV disconnected [ 18.986] (II) fglrx(0): Output CV disconnected [ 18.986] (II) fglrx(0): Using exact sizes for initial modes [ 18.986] (II) fglrx(0): Output CRT1 using initial mode 1600x1200 [ 18.986] (II) fglrx(0): DPI set to (96, 96) [ 18.986] (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0) [ 18.986] (II) fglrx(0): Adapter ATI Radeon HD 2600 XT has 2 configurable heads and 1 displays connected. [ 18.986] (==) fglrx(0): PseudoColor visuals disabled [ 18.986] (==) fglrx(0): NoDRI = NO [ 18.986] (==) fglrx(0): Capabilities: 0x00000000 [ 18.986] (==) fglrx(0): CapabilitiesEx: 0x00000000 [ 18.986] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" [ 18.986] (==) fglrx(0): UseFastTLS=0 [ 18.986] (==) fglrx(0): BlockSignalsOnLock=1 [ 18.987] (II) fglrx(0): doing swlDriScreenInit [ 18.987] (II) fglrx(0): swlDriScreenInit for fglrx driver [ 18.987] (II) fglrx(0): [uki] DRM interface version 1.0 [ 18.987] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0" [ 18.987] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000 [ 18.987] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f9879e38000 [ 18.987] (II) fglrx(0): [uki] framebuffer handle = 0x3000 [ 18.987] (II) fglrx(0): [uki] added 1 reserved context for kernel [ 18.987] (II) fglrx(0): swlDriScreenInit done [ 18.987] (II) fglrx(0): Kernel Module Version Information: [ 18.987] (II) fglrx(0): Name: fglrx [ 18.987] (II) fglrx(0): Version: 8.77.5 [ 18.987] (II) fglrx(0): Date: Aug 25 2010 [ 18.987] (II) fglrx(0): Desc: ATI FireGL DRM kernel module [ 18.987] (II) fglrx(0): Kernel Module version matches driver. [ 18.987] (II) fglrx(0): Kernel Module Build Time Information: [ 18.987] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.34.7-0.2-desktop [ 18.987] (II) fglrx(0): Build-Kernel MODVERSIONS: no [ 18.987] (II) fglrx(0): Build-Kernel __SMP__: yes [ 18.987] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 [ 18.987] (II) fglrx(0): [uki] register handle = 0x00004000 [ 19.019] (II) fglrx(0): Display width adjusted to to 1664 due to alignment constraints [ 19.019] (II) fglrx(0): DRI initialization successfull [ 19.019] (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x010a8000 [ 19.019] (II) fglrx(0): FBMM initialized for area (0,0)-(1664,2624) [ 19.019] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1664,1664) (front color buffer - assumption) [ 19.019] (II) fglrx(0): Largest offscreen area available: 1664 x 960 [ 19.020] (==) fglrx(0): Backing store disabled [ 19.020] (**) fglrx(0): DPMS enabled [ 19.020] (II) fglrx(0): Initialized in-driver Xinerama extension [ 19.020] (**) fglrx(0): Textured Video is enabled. [ 19.023] (II) fglrx(0): GLESX enableFlags = 94 [ 19.023] (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA) [ 19.023] (II) fglrx(0): GLESX is enabled [ 19.030] (II) fglrx(0): UVD2 feature is available [ 19.033] (II) fglrx(0): Enable composite support successfully [ 19.033] (WW) fglrx(0): Option "AccelMethod" is not used [ 19.033] (WW) fglrx(0): Option "VendorName" is not used [ 19.033] (WW) fglrx(0): Option "ModelName" is not used [ 19.033] (II) fglrx(0): X context handle = 0x1 [ 19.033] (II) fglrx(0): [DRI] installation complete [ 19.033] (==) fglrx(0): Silken mouse enabled [ 19.033] (==) fglrx(0): Using HW cursor of display infrastructure! [ 19.033] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2. [ 19.033] (II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero! [ 19.033] (II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed. [ 20.296] (II) AIGLX: Loaded and initialized /usr/X11R6/lib64/modules/dri/fglrx_dri.so [ 20.296] (II) fglrx(0): Enable the clock gating! [ 20.296] (II) fglrx(0): Setting screen physical size to 423 x 317 [ 20.392] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments [ 20.474] (II) fglrx(0): Cannot get EDID information for CRT1 [ 48.108] (II) fglrx(0): Cannot get EDID information for CRT1 [ 48.773] (II) fglrx(0): Cannot get EDID information for CRT1 [ 56.075] (II) fglrx(0): Cannot get EDID information for CRT1 Any help appreciated. Many thanks, Matt -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org