On Sat, 20 Dec 2008 15:00:05 +0100 (CET)
"Carlos E. R."
On Saturday, 2008-12-20 at 12:15 +0100, Martin /Nightowl/ Byttebier wrote:
Is this a hard disk failure?
Could be. Use the HD test program from the manufacturer, or use smartctl.
Oke, I did run smartctl from the systemrescueCD.
root@sysresccd /root % smartctl -l error /dev/sda
smartctl version 5.38 [i486-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 889 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 889 occurred at disk power-on lifetime: 15067 hours (627 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 47 bb 1f e1 Error: UNC 8 sectors at LBA = 0x011fbb47 = 18856775
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 47 bb 1f e1 00 02:47:39.609 READ DMA
ca 00 08 47 00 5e e0 00 02:47:39.599 WRITE DMA
ca 00 70 a7 99 5e e0 00 02:47:39.599 WRITE DMA
c8 00 08 17 67 d4 e5 00 02:47:39.580 READ DMA
e7 00 00 00 00 00 a0 00 02:47:38.563 FLUSH CACHE
.......
....
...
====================================================================
Now that likes chinese to me.
Any comment?
TIA,
Martin
--
Martin /Nightowl/ Byttebier