Hi List,
I have installed openSUSE 11.0 on an Asus R2Hv ultra mobile PC. This
umpc has a intel mobile celeron 1GHz, 1.2GB ram, 80GB HDD, Intel 915GM
display, bluetooth, wlan, gps, and a built-in 7" touchscreen display.
OpenSUSE recognises all the devices, and they all work with some
configuration. All except the monitor. I can get the native resolution
of 800x480 or also 640x480, but under Vista I can also select a higher
resolution of 1024x600. Obviously I would like to get the resolution to
go to 1024x600.
When I have an external monitor attached, I can select 1024x600 or a
standard 1024x768, so I assume the Intel 915GM display adaptor is
capable of the resolution. Here is an excerpt from /var/log/Xorg.0.log
with an external monitor attached.
#xorg.0.log -> external monitor
===========
X.Org X Server 1.4.0.90
...
(II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915),
915GM, 945G, 945GM, 965G, 965G, 965Q, 946GZ
...
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) I810(0): VESA VBE DDC supported
(II) I810(0): VESA VBE DDC Level 2
(II) I810(0): VESA VBE DDC transfer in appr. 1 sec.
(II) I810(0): VESA VBE DDC read successfully
(II) I810(0): Manufacturer: VSC Model: f611 Serial#: 16843009
(II) I810(0): Year: 2003 Week: 49
(II) I810(0): EDID Version: 1.3
...
(**) I810(0): *Built-in mode "1024x768"
(**) I810(0): *Built-in mode "1024x600"
(**) I810(0): Built-in mode "800x600"
(**) I810(0): Built-in mode "640x480"
===========
As you can see, xorg finds the monitor and also detects the resolutions.
But, when I use the built-in 7" display, it doesn't find the monitor parameters.
xorg.0.log -> 7" display
==========
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) I810(0): VESA VBE DDC supported
(II) I810(0): VESA VBE DDC Level none
(II) I810(0): VESA VBE DDC transfer in appr. 0 sec.
(II) I810(0): VESA VBE DDC read failed
(--) I810(0): A non-CRT device is attached to pipe B.
No refresh rate overrides will be attempted.
(--) I810(0): Maximum space available for video modes: 16064 kByte
...
(II) I810(0): Display Info: LFP (local flat panel): attached: TRUE, present: TRUE, size: (800,480)
...
(II) I810(0): PanelID returned panel resolution : 800x480
=========
Under Vista the monitor is reported as a Digital Panel 1024x600 60Hz.
If there are any Xorg gurus, I would appreciate any ideas on getting the resolution to go above native.
Thanks for reading and any help you can offer,
Allen
xorg.conf
===========
# /.../
# SaX generated X11 config file
# Created on: 2008-07-11T21:10:37+1000.
#
# Version: 8.1
# Contact: Marcus Schaefer , 2005
# Contact: SaX-User list https://lists.berlios.de/mailman/listinfo/sax-users
#
# Automatically generated by [ISaX] (8.1)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "Files"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/URW"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/latin2/misc:unscaled"
FontPath "/usr/share/fonts/latin2/75dpi:unscaled"
FontPath "/usr/share/fonts/latin2/100dpi:unscaled"
FontPath "/usr/share/fonts/latin2/Type1"
FontPath "/usr/share/fonts/latin7/75dpi:unscaled"
FontPath "/usr/share/fonts/baekmuk:unscaled"
FontPath "/usr/share/fonts/japanese:unscaled"
FontPath "/usr/share/fonts/kwintv"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/uni:unscaled"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/ucs/misc:unscaled"
FontPath "/usr/share/fonts/ucs/75dpi:unscaled"
FontPath "/usr/share/fonts/ucs/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/misc:unscaled"
FontPath "/usr/share/fonts/hellas/75dpi:unscaled"
FontPath "/usr/share/fonts/hellas/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/Type1"
FontPath "/usr/share/fonts/misc/sgi:unscaled"
FontPath "/usr/share/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
InputDevices "/dev/gpmdata"
InputDevices "/dev/input/mice"
EndSection
Section "ServerFlags"
Option "AIGLX" "on"
Option "AllowMouseOpenFail" "on"
Option "ZapWarning" "on"
EndSection
Section "Module"
Load "dbe"
Load "type1"
Load "freetype"
Load "extmod"
Load "glx"
EndSection
Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "us"
Option "XkbModel" "microsoftpro"
Option "XkbRules" "xfree86"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "Name" "Logitech Optical Wheel Mouse"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Pointer"
Option "Protocol" "explorerps/2"
Option "Device" "/dev/input/mouse0"
# Option "Device" "/dev/input/mice"
EndSection
Section "InputDevice"
Identifier "touchscreen"
Driver "evtouch"
Option "Device" "/dev/input/touchscreen"
Option "DeviceName" "touchscreen"
Option "ReportingMode" "Raw"
Option "SendCoreEvents" "On"
Option "Emulate3Buttons"
Option "Emulate3Timeout" "50"
Option "MinX" "95"
Option "MinY" "142"
Option "MaxX" "4007"
Option "MaxY" "3919"
Option "x0" "-6"
Option "y0" "-1"
Option "x1" "-3"
Option "y1" "-2"
Option "x2" "-1"
Option "y2" "-5"
Option "x3" "-3"
Option "y3" "4"
Option "x4" "-2"
Option "y4" "1"
Option "x5" "0"
Option "y5" "-3"
Option "x6" "-2"
Option "y6" "4"
Option "x7" "1"
Option "y7" "4"
Option "x8" "4"
Option "y8" "6"
# Option "Taptimer" "300"
# Option "longtouch_action" "click"
# Option "longtouch_button" "3"
Option "LongTouchTimer" "5"
Option "MoveLimit" "5"
# Option "Calibrate" "1"
EndSection
#built-in display
Section "Monitor"
Option "CalcAlgorithm" "XServerPool"
HorizSync 30-40
Identifier "Monitor[0]"
ModelName "unknown"
Option "DPMS"
VendorName "unknown"
VertRefresh 50-75
UseModes "Modes[0]"
# Option "PreferredMode" "1024x600"
EndSection
Section "Modes"
Identifier "Modes[0]"
EndSection
Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1024x768" "1024x600" "800x600" "800x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "1024x600" "800x600" "800x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "1024x600" "800x600" "800x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "1024x600" "800x600" "800x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
Option "RandRRotation" "on"
EndSection
Section "Device"
BoardName "915 GM"
BusID "0:2:0"
Driver "i810"
Identifier "Device[0]"
Option "SaXDualHSync" "31-48"
Option "SaXDualHead" ""
Option "SaXDualMode" "Clone"
Option "SaXDualMonitorModel" "1024X768@60HZ"
Option "SaXDualMonitorVendor" "--> VESA"
Option "SaXDualOrientation" "LeftOf"
Option "SaXDualResolution" "1024x768"
Option "SaXDualVSync" "50-60"
Option "SaXExternal" "Identifier&EXT+VertRefresh&50-60+HorizSync&31-48+PreferredMode&1024x768+VendorName&--> VESA+ModelName&1024X768@60HZ"
VendorName "Intel"
EndSection
#External monitor
Section "Monitor"
HorizSync 31-48
Identifier "EXT"
ModelName "1024X768@60HZ"
Option "PreferredMode" "1024x768"
VendorName "--> VESA"
VertRefresh 50-60
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
InputDevice "Pointer" "SendCoreEvents"
# InputDevice "dummy"
InputDevice "touchscreen" "SendCoreEvents"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
Section "Extensions"
Option "Composite" "on"
EndSection
--
To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse+help@opensuse.org
