OK. My flat panel was recognized, but it is connected to standard VGA output, not DVI. Right now, the monitor is hooked up via VGA and not DVI (that may change sometime today as i look for a video card or someway to connect 2 monitors)
What tells: hwinfo --monitor 30: None 00.1: 10000 Monitor [Created at monitor.95] Unique ID: jyhG.DAUN4NHKRE4 Hardware Class: monitor Model: "HP w2207" Vendor: HWP "HP" Device: eisa 0x26a8 "HP w2207" Serial ID: "CND7442KLC" Resolution: 720x400@70Hz Resolution: 640x480@60Hz Resolution: 640x480@75Hz Resolution: 800x600@60Hz Resolution: 800x600@75Hz Resolution: 832x624@75Hz Resolution: 1024x768@60Hz Resolution: 1024x768@75Hz Resolution: 1280x1024@75Hz Resolution: 1280x960@60Hz Resolution: 1280x1024@60Hz Resolution: 1680x1050@60Hz Size: 473x296 mm Detailed Timings #0: Resolution: 1680x1050 Horizontal: 1680 1784 1960 2240 (+104 +280 +560) +hsync Vertical: 1050 1053 1059 1089 (+3 +9 +39) -vsync Frequencies: 146.25 MHz, 65.29 kHz, 59.95 Hz Driver Info #0: Max. Resolution: 1680x1050 Vert. Sync Range: 48-76 Hz Hor. Sync Range: 24-83 kHz Bandwidth: 146 MHz Config Status: cfg=new, avail=yes, need=no, active=unknown
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org