I've installed pcsc-lite, pcsc-ccid and from Kobil libct.so (64bit for my openSUSE-11 setup. After configuring Moneyplex with libproxy-kobil.so (32bit to 64bit wrapper) i cannot connect to the cardreader. The first thing i've seen: there was no /dev/ttyUSB0 which was created by udev in my 10.3 installation. Here is the syslog when plugging in the cardreader: ==== snip ==== Jun 27 07:31:58 erwin kernel: usb 2-4.1.1: new full speed USB device using ehci_hcd and address 18 Jun 27 07:31:58 erwin kernel: hub 2-4.1:1.0: unable to enumerate USB device on port 1 Jun 27 07:31:58 erwin kernel: usb 2-4.1.1: new full speed USB device using ehci_hcd and address 19 Jun 27 07:31:58 erwin kernel: usb 2-4.1.1: configuration #1 chosen from 1 choice Jun 27 07:31:58 erwin kernel: usb 2-4.1.1: New USB device found, idVendor=0d46, idProduct=3002 Jun 27 07:31:58 erwin kernel: usb 2-4.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 27 07:31:58 erwin kernel: usb 2-4.1.1: Product: KAAN Advanced Jun 27 07:31:58 erwin kernel: usb 2-4.1.1: Manufacturer: KOBIL Jun 27 07:31:58 erwin kernel: usb 2-4.1.1: SerialNumber: E_067105398 Jun 27 07:31:59 erwin pcscd: hotplug_libhal.c:341:HPAddDevice() Adding USB device: usb_device_d46_3002_E_067105398_if0 Jun 27 07:32:00 erwin pcscd: readerfactory.c:1130:RFInitializeReader() Attempting startup of KOBIL KAAN Advanced 00 00 using /usr/lib64/readers/ifd-ccid.bundle/Contents/Linux/libccid.so.1.3.5 Jun 27 07:32:00 erwin pcscd: readerfactory.c:997:RFBindFunctions() Loading IFD Handler 3.0 Jun 27 07:32:00 erwin pcscd: ifdhandler.c:1306:init_driver() LogLevel: 0x0003 Jun 27 07:32:00 erwin pcscd: ifdhandler.c:1316:init_driver() DriverOptions: 0x0000 Jun 27 07:32:00 erwin pcscd: ifdhandler.c:81:IFDHCreateChannelByName() lun: 0, device: usb:0d46/3002:libhal:/org/freedesktop/Hal/devices/usb_device_d46_3002_E_067105398_if0 Jun 27 07:32:00 erwin pcscd: ccid_usb.c:235:OpenUSBByName() Manufacturer: Ludovic Rousseau (ludovic.rousseau@free.fr) Jun 27 07:32:00 erwin pcscd: ccid_usb.c:245:OpenUSBByName() ProductString: Generic CCID driver v1.3.5 Jun 27 07:32:00 erwin pcscd: ccid_usb.c:251:OpenUSBByName() Copyright: This driver is protected by terms of the GNU Lesser General Public License version 2.1, or (at your option) any later version. Jun 27 07:32:00 erwin pcscd: ccid_usb.c:405:OpenUSBByName() Found Vendor/Product: 0D46/3002 (KOBIL KAAN Advanced) Jun 27 07:32:00 erwin pcscd: ccid_usb.c:407:OpenUSBByName() Using USB bus/device: 002/019 Jun 27 07:32:00 erwin pcscd: ccid_usb.c:783:get_data_rates() Wrong GET DATA RATES size: 1 Jun 27 07:32:00 erwin pcscd: ifdhandler.c:304:IFDHGetCapabilities() lun: 0, tag: 0xFB0 Jun 27 07:32:00 erwin pcscd: ifdhandler.c:304:IFDHGetCapabilities() lun: 0, tag: 0xFAE Jun 27 07:32:00 erwin pcscd: ifdhandler.c:350:IFDHGetCapabilities() Reader supports 1 slot(s) ==== snip ==== Seems to be fine. Putting in a HBCI card: ==== snip ==== Jun 27 07:36:17 erwin pcscd: ifdhandler.c:908:IFDHPowerICC() lun: 0, action: PowerUp Jun 27 07:36:17 erwin pcscd: eventhandler.c:437:EHStatusHandlerThread() Card inserted into KOBIL KAAN Advanced 00 00 Jun 27 07:36:17 erwin pcscd: Card ATR: 3B FF 18 00 FF 81 31 3C 45 65 63 0D 02 31 02 50 00 10 90 14 37 00 04 10 0C ==== snip ==== Looks also good, but accessing with Moneyplex: ==== snip ==== Jun 27 07:27:25 erwin pcscd: winscard.c:304:SCardConnect() Reader KOBIL KAAN Advanced (E_067105398) 00 00 Not Found ==== snip ==== Someone with the same problem or an idea how to fix? Regards! Frank -- Frank Fiene / IT-Services Fon: +49 2526 29-6200 Fax: +49 2526 29-16-6200 mailto: ffiene@veka.com www.veka.com VEKA AG Dieselstr. 8 48324 Sendenhorst Deutschland/Germany Vorstand: Andreas Hartleif (Vorsitzender), Dr. Andreas W. Hillebrand Bonifatius Eichwald, Elke Hartleif, Dr. Werner Schuler Vorsitzender des Aufsichtsrates: Heinrich Laumann HRB 8282 AG Münster -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org