HI Here is the menu.lst and fdisk -all: cat /boot/grub/menu.lst # Modified by YaST2. Last modification on Thu Nov 1 21:55:54 EDT 2007 default 2 timeout 8 ##YaST - generic_mbr ##YaST - activate ###Don't change this comment - YaST2 identifier: Original name: linux### title openSUSE 10.2 kernel (hd0,3)/boot/vmlinuz root=/dev/disk/by-label//1 resume=/dev/hda3 splash=silent showopts initrd (hd0,3)/boot/initrd-2.6.18.8-0.5-default ###Don't change this comment - YaST2 identifier: Original name: failsafe### title Failsafe -- openSUSE 10.2 kernel (hd0,3)/boot/vmlinuz root=/dev/disk/by-label//1 showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3 initrd (hd0,3)/boot/initrd-2.6.18.8-0.5-default title openSUSE 10.2 - 2.6.18.8-0.5 kernel (hd0,3)/boot/vmlinuz-2.6.18.8-0.5-default root=/dev/disk/by-label//1 resume=/dev/hda3 splash=silent showopts initrd (hd0,3)/boot/initrd-2.6.18.8-0.5-default title Failsafe -- openSUSE 10.2 - 2.6.18.8-0.5 kernel (hd0,3)/boot/vmlinuz-2.6.18.8-0.5-default root=/dev/disk/by-label//1 showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off initrd (hd0,3)/boot/initrd-2.6.18.8-0.5-default title suse 10.2 64 rootnoverify (hd0,0) chainloader (hd1,1)+1 title Centos 4 rootnoverify (hd0,0) chainloader (hd0,1)+1 title Fedora 7 rootnoverify (hd0,0) chainloader (hd1,2)+1 title XEN -- openSUSE 10.2 - 2.6.18.8-0.5 kernel (hd0,3)/boot/xen.gz module (hd0,3)/boot/vmlinuz-2.6.18.8-0.5-xen root=/dev/disk/by-label//1 resume=/dev/hda3 splash=silent showopts module (hd0,3)/boot/initrd-2.6.18.8-0.5-xen title 10.3 rootnoverify (hd0,0) chainloader (hd1,4)+1 Suse102:/boot/grub # Disk /dev/hda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 5951 17000 88759125 c W95 FAT32 (LBA) /dev/hda2 1 1275 10241406 83 Linux /dev/hda3 1276 1466 1534207+ 82 Linux swap / Solaris /dev/hda4 * 1467 5950 36017730 83 Linux Partition table entries are not in disk order Disk /dev/sda: 320.0 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 1 15701 126118251 83 Linux /dev/sda2 * 15702 16485 6297480 83 Linux /dev/sda3 16486 17601 8964270 83 Linux /dev/sda4 17602 38913 171188640 f W95 Ext'd (LBA) /dev/sda5 17602 18717 8964238+ 83 Linux Disk /dev/hde: 40.0 GB, 40027029504 bytes 255 heads, 63 sectors/track, 4866 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hde1 * 1 4865 39078081 7 HPFS/NTFS Suse102:~ # Gabriel . wrote:
2007/11/2, Jose
: Hi Everybody,
I have this suse 10.2 machine as the master distro installed, sitting on a hda partition, along with a couple of more distros on the same drive, I have another sdb drive (SATA) with a few more partitions, I have chainloaded from the 10.2 booter a couple of distros, one of them fedora and the other 10.3, Fedora would boot up if selected, but 10.3 will not, both have rootnoverify as an option, and I have both installed with their own grub booting from within their own root partition, so I am not sure why 10.3 is not working, if I put the DVD and select to boot the 10.3 install it works.
Any ideas, I have seen lots of issues with SATA, but nothing as the way I am doing it
Thanks in advance for your help
Jose
Could you please put menu.lst the device.map. Also, please put the detail of your disks/partitions
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org