On 10/18/07, Edke
Oct 17 11:51:36 edke smartd[3652]: Device: /dev/sda, SMART Usage Attribute: 190 Temperature_Celsius changed from 51 to 53 Oct 17 11:51:36 edke smartd[3652]: Device: /dev/sda, SMART Usage Attribute: 194 Temperature_Celsius changed from 49 to 47 Oct 17 11:51:36 edke smartd[3652]: Device: /dev/sda, SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 82 to 79 Oct 17 11:51:37 edke smartd[3652]: Device: /dev/sdb, SMART Usage Attribute: 190 Temperature_Celsius changed from 51 to 52 Oct 17 11:51:37 edke smartd[3652]: Device: /dev/sdb, SMART Usage Attribute: 194 Temperature_Celsius changed from 49 to 48
Reboot???
Oct 17 11:57:24 edke syslog-ng[2278]: syslog-ng version 1.6.12 starting Oct 17 11:57:24 edke SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. Oct 17 11:57:25 edke SuSEfirewall2: batch committing... Oct 17 11:57:25 edke rchal: CPU frequency scaling is not supported by your processor.
So, smartd was running just when the problem happens. Smartd is a HDD monitoring daemon, so either it is faulty, or some of your drives is dieing. I would suggest that you run a disk test utility - you have to have one with the CD you received with your drive, or if you do not have any manufacturer cd, then download and burn Ultimate Boot CD (http://ubcd.sourceforge.net/ ), it contains test utils for most major HDD manufacturers. And ... run not the basic (fast) tests, but the most aggressive ones. Also, please use bottom-posting, and quote your answers. Thanks: http://en.opensuse.org/Opensuse_mailing_list_netiquette Cheers -- Svetoslav Milenov (Sunny) Even the most advanced equipment in the hands of the ignorant is just a pile of scrap. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org