Hi
I'm installing openSuse 10.2 and for the first time. I got the message
that acpi was
not supported in kernel while installing and I've only installed
minimum packages.
They are openSuse base
yast sys admin
KDE Base
and others to resolve dependencies.
I could install only in the failsafe mode.
I had to resort to internet installation after the CD method failed on
account of the YAST freezing.
I am attaching the dmesg file.
If there are any other details that are required let me know and I
will send them.
Geetha
Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2
20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC
2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000000ffea800 (usable)
BIOS-e820: 000000000ffea800 - 0000000010000000 (reserved)
BIOS-e820: 00000000feea0000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
On node 0 totalpages: 65514
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 61418 pages, LIFO batch:15
DMI 2.3 present.
Using APIC driver default
IO/L-APIC allowed because system is MP or new enough
Allocating PCI resources starting at 20000000 (gap: 10000000:eeea0000)
Detected 996.732 MHz processor.
Built 1 zonelists. Total pages: 65514
Kernel command line: root=/dev/hda7 vga=normal ide=nodma apm=off
acpi=off noresume nosmp noapic maxcpus=0 edd=off 3
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (0120a000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 252968k/262056k available (1697k kernel code, 8448k reserved,
968k data, 196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1994.93 BogoMIPS (lpj=3989873)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040
00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
checking if image is initramfs... it is
Freeing initrd memory: 2798k freed
CPU0: Intel(R) Pentium(R) III Mobile CPU 1000MHz stepping 01
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
migration_cost=0
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfc06e, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fe2d0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xe2f4, dseg 0x40
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0880-08bf claimed by ICH4 GPIO
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
PCI: Discovered primary peer bus 08 [IRQ]
PCI: Using IRQ router PIIX/ICH [8086/244c] at 0000:00:1f.0
pnp: 00:01: ioport range 0x800-0x87f has been reserved
pnp: 00:01: ioport range 0x860-0x87f has been reserved
pnp: 00:01: ioport range 0x880-0x8bf has been reserved
pnp: 00:01: ioport range 0x8c0-0x8ff has been reserved
pnp: 00:01: ioport range 0x600-0x67f has been reserved
pnp: 00:01: ioport range 0x680-0x6ff has been reserved
pnp: 00:01: ioport range 0x3f0-0x3f1 has been reserved
pnp: 00:01: ioport range 0x900-0x90f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: c000-cfff
MEM window: fc000000-fdffffff
PREFETCH window: e0000000-e7ffffff
PCI: Bus 3, cardbus bridge: 0000:02:0f.0
IO window: 0000e000-0000e0ff
IO window: 0000f000-0000f0ff
PREFETCH window: 20000000-21ffffff
MEM window: f4000000-f5ffffff
PCI: Bus 7, cardbus bridge: 0000:02:0f.1
IO window: 0000f400-0000f4ff
IO window: 0000f800-0000f8ff
PREFETCH window: 22000000-23ffffff
MEM window: f6000000-f7ffffff
PCI: Bridge: 0000:00:1e.0
IO window: e000-ffff
MEM window: f4000000-fbffffff
PREFETCH window: 20000000-24ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: setting IRQ 10 as level-triggered
PCI: Found IRQ 10 for device 0000:02:0f.0
PCI: Sharing IRQ 10 with 0000:00:1f.2
PCI: Sharing IRQ 10 with 0000:02:06.0
PCI: Sharing IRQ 10 with 0000:02:06.1
PCI: Sharing IRQ 10 with 0000:02:0f.1
PCI: Sharing IRQ 10 with 0000:02:0f.2
PCI: Found IRQ 10 for device 0000:02:0f.1
PCI: Sharing IRQ 10 with 0000:00:1f.2
PCI: Sharing IRQ 10 with 0000:02:06.0
PCI: Sharing IRQ 10 with 0000:02:06.1
PCI: Sharing IRQ 10 with 0000:02:0f.0
PCI: Sharing IRQ 10 with 0000:02:0f.2
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled on user request.
audit: initializing netlink socket (disabled)
audit(1181038132.888:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
input: AT Translated Set 2 keyboard as /class/input/input1
Synaptics Touchpad, model: 1, fw: 5.7, id: 0x8146b1, caps: 0x804793/0x0
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input2
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 1
Using IPI No-Shortcut mode
Freeing unused kernel memory: 196k freed
Time: tsc clocksource has been installed.
Unknown option ''
ide_setup: ide=nodma : Prevented DMA
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2M: IDE controller at PCI slot 0000:00:1f.1
ICH2M: chipset revision 3
ICH2M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: TOSHIBA MK2017GAP, ATA DISK drive
hdb: SAMSUNG CD-ROM SN-124, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 39070080 sectors (20003 MB), CHS=38760/16/63
hda: cache flushes not supported
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 >
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
JBD: barrier-based sync failed on hda7 - disabling barriers
IBM TrackPoint firmware: 0x0b, buttons: 2/3
input: TPPS/2 IBM TrackPoint as /class/input/input3
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
lp0: using parport0 (interrupt-driven).
i8xx TCO timer: initialized (0x0860). heartbeat=30 sec (nowayout=0)
intel_rng: FWH not detected
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel i815 Chipset.
agpgart: AGP aperture is 64M @ 0xe8000000
JBD: barrier-based sync failed on hda7 - disabling barriers
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
PCI: Found IRQ 10 for device 0000:00:1f.2
PCI: Sharing IRQ 10 with 0000:02:06.0
PCI: Sharing IRQ 10 with 0000:02:06.1
PCI: Sharing IRQ 10 with 0000:02:0f.0
PCI: Sharing IRQ 10 with 0000:02:0f.1
PCI: Sharing IRQ 10 with 0000:02:0f.2
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: UHCI Host Controller
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1f.2: irq 10, io base 0x0000dce0
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
usb usb1: SerialNumber: 0000:00:1f.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hdb: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
PCI: Found IRQ 10 for device 0000:02:06.0
PCI: Sharing IRQ 10 with 0000:00:1f.2
PCI: Sharing IRQ 10 with 0000:02:06.1
PCI: Sharing IRQ 10 with 0000:02:0f.0
PCI: Sharing IRQ 10 with 0000:02:0f.1
PCI: Sharing IRQ 10 with 0000:02:0f.2
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:02:06.0: 3Com PCI 3c556 Laptop Tornado at d08a4c00.
ieee1394: Initialized config rom entry `ip1394'
Yenta: CardBus bridge found at 0000:02:0f.0 [1028:00e6]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:0f.0, mfunc 0x05033002, devctl 0x64
Yenta: ISA IRQ mask 0x0218, PCI irq 10
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
cs: IO port probe 0xe000-0xffff: clean.
pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x24ffffff
Yenta: CardBus bridge found at 0000:02:0f.1 [1028:00e6]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:0f.1, mfunc 0x05033002, devctl 0x64
Yenta: ISA IRQ mask 0x0218, PCI irq 10
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
cs: IO port probe 0xe000-0xffff: clean.
pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x24ffffff
PCI: Found IRQ 10 for device 0000:02:0f.2
PCI: Sharing IRQ 10 with 0000:00:1f.2
PCI: Sharing IRQ 10 with 0000:02:06.0
PCI: Sharing IRQ 10 with 0000:02:06.1
PCI: Sharing IRQ 10 with 0000:02:0f.0
PCI: Sharing IRQ 10 with 0000:02:0f.1
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10]
MMIO=[f8ffc800-f8ffcfff] Max Packet=[2048] IR/IT contexts=[4/4]
PCI: setting IRQ 5 as level-triggered
PCI: Found IRQ 5 for device 0000:02:03.0
maestro3: enabled hack for 'Dell Inspiron 8100'
cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
ieee1394: Host added: ID:BUS[0-00:1023] GUID[4a4fc0002d401c21]
Adding 514040k swap on /dev/hda5. Priority:-1 extents:1 across:514040k
Adding 514040k swap on /dev/hda6. Priority:-2 extents:1 across:514040k
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
JBD: barrier-based sync failed on hda7 - disabling barriers
loop: loaded (max 8 devices)
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (2047 buckets, 16376 max) - 228 bytes per conntrack
powernow: This module only works with AMD K7 CPUs
eth0: setting full-duplex.
NET: Registered protocol family 17
IA-32 Microcode Update Driver: v1.14a